-openocd.texi is the authoritative source of OpenOCD documentation
+Welcome to OpenOCD!
+===================
+
+OpenOCD provides on-chip programming and debugging support with a
+layered architecture of JTAG interface and TAP support, debug target
+support (e.g. ARM, MIPS), and flash chip drivers (e.g. CFI, NAND, etc.).
+Several network interfaces are available for interactiving with OpenOCD:
+HTTP, telnet, TCL, and GDB. The GDB server enables OpenOCD to function
+as a "remote target" for source-level debugging of embedded systems
+using the GNU GDB program.
+
+This README file contains an overview of the following topics:
+- how to find and build more OpenOCD documentation,
+- the build process
+- packaging tips.
+- configuration options
+
+=====================
+OpenOCD Documentation
+=====================
+
+In addition to in-tree documentation, the latest documentation may be
+viewed on-line at the following URLs:
+
+ OpenOCD User's Guide:
+ http://openocd.berlios.de/doc/html/index.html
+
+ OpenOCD Developer's Manual:
+ http://openocd.berlios.de/doc/doxygen/index.html
+
+These reflect the latest development versions, so the following section
+introduces how to build the complete documentation from the package.
+
+
+For more information, refer to these documents or contact the developers
+by subscribing to the OpenOCD developer mailing list:
+
+ openocd-development@lists.berlios.de
+
+Building the OpenOCD Documentation
+----------------------------------
+
+The OpenOCD User's Guide can be produced in two different format:
+
+ # If PDFVIEWER is set, this creates and views the PDF User Guide.
+ make pdf && ${PDFVIEWER} doc/openocd.pdf
+
+ # If HTMLVIEWER is set, this creates and views the HTML User Guide.
+ make html && ${HTMLVIEWER} doc/openocd.html/index.html
+
+The OpenOCD Developer Manual contains information about the internal
+architecture and other details about the code:
+
+ make doxygen
+
+ # If HTMLVIEWER is set, this views the HTML Doxygen output.
+ ${HTMLVIEWER} doxyegen/index.html
+
+The remaining sections describe how to configure the system such that
+you can build the in-tree documentation.
+
+==================
+Installing OpenOCD
+==================
+
+A Note to OpenOCD Users
+-----------------------
+
+If you would rather be working "with" OpenOCD rather than "on" it, your
+operating system or interface supplier may provide binaries for you in a
+convenient package.
+
+Such packages should be more stable than SVN trunk, where bleeding-edge
+development takes place. These "Packagers" produce binary releases of
+OpenOCD after the developers produces new "stable" versions of the
+source code. Previous versions of OpenOCD cannot be used to diagnosed
+problems with the current release, so users are encouraged to keep in
+contact with their distribution package maintainers or interface vendors
+to ensure suitable upgrades appear regularly.
+
+Users of these binary versions of OpenOCD must contact their Packager to
+ask for support or newer versions of the binaries; the OpenOCD
+developers do not support packages directly.
+
+A Note to OpenOCD Packagers
+---------------------------
+
+You are a PACKAGER of OpenOCD if you:
+
+- Sell dongles: and include pre-built binaries
+- Supply tools: A complete development solution
+- Supply IDEs: like Eclipse, or RHIDE, etc.
+- Build packages: RPM files, or DEB files for a Linux Distro
+
+As a PACKAGER, you will experience first reports of most issues.
+When you fix those problems for your users, your solution may help
+prevent hundreds (if not thousands) of other questions from other users.
+
+If something does not work for you, please work to inform the OpenOCD
+developers know how to improve the system or documentation to avoid
+future problems, and follow-up to help us ensure the issue will be fully
+resolved in our future releases.
+
+That said, the OpenOCD developers would also like you to follow a few
+suggestions:
+
+- Send patches, including config files, upstream.
+- Always build with printer ports enabled.
+- Use libftdi + libusb for FT2232 support.
+
+Remember, the FTD2XX library cannot be used in binary distributions, due
+to restrictions of the GPL v2.
+
+================
+Building OpenOCD
+================
+
+The INSTALL file contains generic instructions for running 'configure'
+and compiling the OpenOCD source code. That file is provided by default
+for all GNU automake packages, and
+
+if you are not familiar with the GNU autotools, then you should read
+those instructions first.
+Still, the
+remainder of this document tries to provide complete instructions for
+those looking for a quick-install
+
+OpenOCD Dependencies
+--------------------
+
+You will need to install the appropriate driver files, if you want to
+build support for a USB or FTDI-based interface:
+
+- ft2232, jlink, rlink, vsllink, usbprog, arm-jtag-ew:
+ - libusb: required for portable communication with USB dongles
+- ft2232 also requires:
+ - libftdi: http://www.intra2net.com/opensource/ftdi/ *OR*
+ - ftd2xx: http://www.ftdichip.com/Drivers/D2XX.htm,
+ or the Amontec version (from @uref{http://www.amontec.com}), for
+ easier support of JTAGkey's vendor and product IDs.
+
+Compiling OpenOCD
+-----------------
+
+To build OpenOCD (on both Linux and Cygwin), use the following sequence
+of commands:
+
+ ./configure [with some options listed in the next section]
+ make
+ make install
+
+The 'configure' step generates the Makefiles required to build OpenOCD,
+usually with one or more options provided to it. The first 'make' step
+will build OpenOCD and place the final executable in ./src/. The
+final (optional) step, ``make install'', places all of the files in the
+required location.
+
+Configuration Options
+---------------------
+
+The configure script takes numerous options, specifying which JTAG
+interfaces should be included (among other things). The following list
+of options was extracted from the output of './configure --help'. Other
+options may be available there:
+
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
+ NOTE: This option is *required* for SVN builds!
+ It should *not* be used to build a release.
+
+ --enable-dummy Enable building the dummy JTAG port driver
+
+ --enable-ft2232_libftdi Enable building support for FT2232 based devices
+ using the libftdi driver, opensource alternate of
+ FTD2XX
+ --enable-ft2232_ftd2xx Enable building support for FT2232 based devices
+ using the FTD2XX driver from ftdichip.com
+ --enable-ftd2xx-highspeed
+ Enable building support for FT2232H and
+ FT4232H-based devices (requires >=libftd2xx-0.4.16)
+
+ --enable-gw16012 Enable building support for the Gateworks GW16012
+ JTAG Programmer
+
+ --enable-parport Enable building the pc parallel port driver
+ --disable-parport-ppdev Disable use of ppdev (/dev/parportN) for parport
+ (for x86 only)
+ --enable-parport-giveio Enable use of giveio for parport (for CygWin only)
+
+ --enable-presto_libftdi Enable building support for ASIX Presto Programmer
+ using the libftdi driver
+ --enable-presto_ftd2xx Enable building support for ASIX Presto Programmer
+ using the FTD2XX driver
+
+ --enable-amtjtagaccel Enable building the Amontec JTAG-Accelerator driver
+ --enable-arm-jtag-ew Enable building support for the Olimex ARM-JTAG-EW
+ Programmer
+ --enable-jlink Enable building support for the Segger J-Link JTAG
+ Programmer
+ --enable-rlink Enable building support for the Raisonance RLink
+ JTAG Programmer
+ --enable-usbprog Enable building support for the usbprog JTAG
+ Programmer
+ --enable-vsllink Enable building support for the Versaloon-Link JTAG
+ Programmer
+
+ --enable-oocd_trace Enable building support for the OpenOCD+trace ETM
+ capture device
+
+ --enable-ep93xx Enable building support for EP93xx based SBCs
+ --enable-at91rm9200 Enable building support for AT91RM9200 based SBCs
+
+ --enable-ecosboard Enable building support for eCos based JTAG debugger
+ --enable-zy1000 Enable ZY1000 interface
+
+ --enable-minidriver-dummy
+ Enable the dummy minidriver.
+
+ --enable-ioutil Enable ioutil functions - useful for standalone
+ OpenOCD implementations
+ --enable-httpd Enable builtin httpd server - useful for standalone
+ OpenOCD implementations
+
+Miscellaneous Configure Options
+-------------------------------
+
+The following additional options may also be useful:
+
+ --disable-assert turn off assertions
+
+ --enable-verbose Enable verbose JTAG I/O messages (for debugging).
+ --enable-verbose-jtag-io
+ Enable verbose JTAG I/O messages (for debugging).
+ --enable-verbose-usb-io Enable verbose USB I/O messages (for debugging)
+ --enable-verbose-usb-comms
+ Enable verbose USB communication messages (for
+ debugging)
+ --enable-malloc-logging Include free space in logging messages (requires
+ malloc.h).
+
+ --disable-gccwarnings Disable extra gcc warnings during build.
+ --disable-wextra Disable extra compiler warnings
+ --disable-werror Do not treat warnings as errors
+
+ --enable-release Enable building of an OpenOCD release. This
+ option is intended for project maintainers.
+ It simply omits the svn version string when
+ the openocd -v is executed (to KISS).
+
+ --disable-option-checking
+ Ignore unrecognized --enable and --with options.
+ --disable-dependency-tracking speeds up one-time build
+ --enable-shared[=PKGS] build shared libraries [default=no]
+ --enable-static[=PKGS] build static libraries [default=yes]
+
+Parallel Port Dongles
+---------------------
+
+If you want to access the parallel port using the PPDEV interface you
+have to specify both --enable-parport AND --enable-parport-ppdev, since the
+the later option is an option to the parport driver (see
+http://forum.sparkfun.com/viewtopic.php?t=3795 for more info).
+
+The same is true for the --enable-parport-giveio option, you
+have to use both the --enable-parport AND the --enable-parport-giveio
+option if you want to use giveio instead of ioperm parallel port access
+method.
+
+FT2232C Based USB Dongles
+-------------------------
+
+There are 2 methods of using the FTD2232, either (1) using the
+FTDICHIP.COM closed source driver, or (2) the open (and free) driver
+libftdi.
+
+Using LIBFTDI
+-------------
+
+For both Linux and Windows, both libusb and libftdi must be built and
+installed. To use the newer FT2232H chips, supporting RTCK and USB high
+speed (480 Mbps), you need libftdi version 0.16 or newer. Many Linux
+distributions provide suitable packages for these libraries.
+
+For Windows, libftdi is supported with versions 0.14 and later.
+
+With these prerequisites met, configure the libftdi solution like this:
+
+ ./configure --prefix=/path/for/your/install --enable-ft2232_libftdi
+
+Then type ``make'', and perhaps ``make install''.
+
+Using FTDI's FTD2XX
+-------------------
+
+Some claim the (closed) FTDICHIP.COM solution is faster, which
+is the motivation for supporting it even though its licensing restricts
+it to non-redistributable OpenOCD binaries, and it is not available for
+all operating systems used with OpenOCD. You may, however, build such
+copies for personal use.
+
+The FTDICHIP drivers come as either a (win32) ZIP file, or a (Linux)
+TAR.GZ file. You must unpack them ``some where'' convient. As of this
+writing FTDICHIP does not supply means to install these files "in an
+appropriate place."
+
+If your distribution does not package these, there are several
+'./configure' options to solve this problem:
+
+ --with-ftd2xx-win32-zipdir
+ Where (CYGWIN/MINGW) the zip file from ftdichip.com
+ was unpacked <default=search>
+ --with-ftd2xx-linux-tardir
+ Where (Linux/Unix) the tar file from ftdichip.com
+ was unpacked <default=search>
+ --with-ftd2xx-lib Use static or shared ftd2xx libs on default static
+
+If you are using the FTDICHIP.COM driver, download and unpack the
+Windows or Linux FTD2xx drivers from the following location:
+
+ http://www.ftdichip.com/Drivers/D2XX.htm
+
+Remember, this library is binary-only, while OpenOCD is licenced
+according to GNU GPLv2 without any exceptions. That means that
+_distributing_ copies of OpenOCD built with the FTDI code would violate
+the OpenOCD licensing terms.
+
+
+Cygwin/Win32 Notes
+******************
+
+The Cygwin/Win32 ZIP file contains a directory named ftd2xx.win32.
+Assuming that you have extracted this archive in the same directory as
+the OpenOCD package, you could configure with options like the following:
+
+ ./configure \
+ --enable-ft2232_ftd2xx \
+ --with-ftd2xx-win32-zipdir=../ftd2xx.win32 \
+ ... other options ...
+
+Linux Notes
+***********
+
+The Linux tar.gz archive contains a directory named libftd2xx0.4.16
+(or similar). Assuming that you have extracted this archive in the same
+directory as the OpenOCD package, you could configure with options like
+the following:
+
+ ./configure \
+ --enable-ft2232_ftd2xx \
+ --with-ft2xx-linux-tardir=../libftd2xx0.4.16 \
+ ... other options ...
+
+=================================
+Obtaining OpenOCD From Subversion
+---------------------------------
+
+You can download the current SVN version with an SVN client of your
+choice from the following repositories:
+
+ svn://svn.berlios.de/openocd/trunk
+or
+ http://svn.berlios.de/svnroot/repos/openocd/trunk
+
+Using the SVN command line client, you can use the following command to
+fetch the latest version (make sure there is no (non-svn) directory
+called "openocd" in the current directory):
+
+ svn checkout svn://svn.berlios.de/openocd/trunk openocd
+
+If you prefer GIT based tools, the @command{git-svn} package works too:
+
+ git svn clone -s svn://svn.berlios.de/openocd
+
+Tips For Building From The Subversion Repository
+************************************************
+
+Building OpenOCD from a repository requires a recent version of the GNU
+autotools (autoconf >= 2.59 and automake >= 1.9). For building on
+Windows, you have to use Cygwin. Make sure that your @env{PATH}
+environment variable contains no other locations with Unix utils (like
+UnxUtils) - these can't handle the Cygwin paths, resulting in obscure
+dependency errors. This was an observation gathered from the logs of
+one user; please correct us if this is wrong.
+
+1) Run './bootstrap' to create the 'configure' script and prepare
+ the build process for your host system.
+
+2) Run './configure --enable-maintainer-mode' with other options.
@menu
* About:: About OpenOCD
* Developers:: OpenOCD Developers
-* Building OpenOCD:: Building OpenOCD From SVN
* JTAG Hardware Dongles:: JTAG Hardware Dongles
* About JIM-Tcl:: About JIM-Tcl
* Running:: Running OpenOCD
@section OpenOCD Subversion Repository
-The ``Building From Source'' section provides instructions to retrieve
-and and build the latest version of the OpenOCD source code.
-@xref{Building OpenOCD}.
+You can download the current SVN version with an SVN client of your
+choice from the following repositories:
+
+ svn://svn.berlios.de/openocd/trunk
+or
+ http://svn.berlios.de/svnroot/repos/openocd/trunk
+
+Using the SVN command line client, you can use the following command to
+fetch the latest version (make sure there is no (non-svn) directory
+called "openocd" in the current directory):
+
+ svn checkout svn://svn.berlios.de/openocd/trunk openocd
+
+If you prefer GIT based tools, the @command{git-svn} package works too:
+
+ git svn clone -s svn://svn.berlios.de/openocd
+
+The ``README'' file contains the instructions for building the project
+from the repository.
Developers that want to contribute patches to the OpenOCD system are
@b{strongly} encouraged to base their work off of the most recent trunk
@uref{https://lists.berlios.de/mailman/listinfo/openocd-svn}
-@node Building OpenOCD
-@chapter Building OpenOCD
-@cindex building
-
-@section Pre-Built Tools
-If you are interested in getting actual work done rather than building
-OpenOCD, then check if your interface supplier provides binaries for
-you. Chances are that that binary is from some SVN version that is more
-stable than SVN trunk where bleeding edge development takes place.
-
-@section Packagers Please Read!
-
-You are a @b{PACKAGER} of OpenOCD if you
-
-@enumerate
-@item @b{Sell dongles} and include pre-built binaries
-@item @b{Supply tools} i.e.: A complete development solution
-@item @b{Supply IDEs} like Eclipse, or RHIDE, etc.
-@item @b{Build packages} i.e.: RPM files, or DEB files for a Linux Distro
-@end enumerate
-
-As a @b{PACKAGER}, you will experience first reports of most issues.
-When you fix those problems for your users, your solution may help
-prevent hundreds (if not thousands) of other questions from other users.
-
-If something does not work for you, please work to inform the OpenOCD
-developers know how to improve the system or documentation to avoid
-future problems, and follow-up to help us ensure the issue will be fully
-resolved in our future releases.
-
-That said, the OpenOCD developers would also like you to follow a few
-suggestions:
-
-@enumerate
-@item Send patches, including config files, upstream.
-@item Always build with printer ports enabled.
-@item Use libftdi + libusb for FT2232 support.
-@end enumerate
-
-@section Building From Source
-
-You can download the current SVN version with an SVN client of your choice from the
-following repositories:
-
- @uref{svn://svn.berlios.de/openocd/trunk}
-
-or
-
- @uref{http://svn.berlios.de/svnroot/repos/openocd/trunk}
-
-Using the SVN command line client, you can use the following command to fetch the
-latest version (make sure there is no (non-svn) directory called "openocd" in the
-current directory):
-
-@example
- svn checkout svn://svn.berlios.de/openocd/trunk openocd
-@end example
-
-If you prefer GIT based tools, the @command{git-svn} package works too:
-
-@example
- git svn clone -s svn://svn.berlios.de/openocd
-@end example
-
-Building OpenOCD from a repository requires a recent version of the
-GNU autotools (autoconf >= 2.59 and automake >= 1.9).
-For building on Windows,
-you have to use Cygwin. Make sure that your @env{PATH} environment variable contains no
-other locations with Unix utils (like UnxUtils) - these can't handle the Cygwin
-paths, resulting in obscure dependency errors (This is an observation I've gathered
-from the logs of one user - correct me if I'm wrong).
-
-You further need the appropriate driver files, if you want to build support for
-a FTDI FT2232 based interface:
-
-@itemize @bullet
-@item @b{ftdi2232} libftdi (@uref{http://www.intra2net.com/opensource/ftdi/})
-@item @b{ftd2xx} libftd2xx (@uref{http://www.ftdichip.com/Drivers/D2XX.htm}),
-or the Amontec version (from @uref{http://www.amontec.com}),
-for easier support of JTAGkey's vendor and product IDs.
-@end itemize
-
-libftdi is supported under Windows. Do not use versions earlier than 0.14.
-To use the newer FT2232H chips, supporting RTCK and USB high speed (480 Mbps),
-you need libftdi version 0.16 or newer.
-
-Some people say that FTDI's libftd2xx code provides better performance.
-However, it is binary-only, while OpenOCD is licenced according
-to GNU GPLv2 without any exceptions.
-That means that @emph{distributing} copies of OpenOCD built with
-the FTDI code would violate the OpenOCD licensing terms.
-You may, however, build such copies for personal use.
-
-To build OpenOCD (on both Linux and Cygwin), use the following commands:
-
-@example
- ./bootstrap
-@end example
-
-Bootstrap generates the configure script, and prepares building on your system.
-
-@example
- ./configure [options, see below]
-@end example
-
-Configure generates the Makefiles used to build OpenOCD.
-
-@example
- make
- make install
-@end example
-
-Make builds OpenOCD, and places the final executable in ./src/, the last step, ``make install'' is optional.
-
-The configure script takes several options, specifying which JTAG interfaces
-should be included (among other things):
-
-@itemize @bullet
-@item
-@option{--enable-parport} - Enable building the PC parallel port driver.
-@item
-@option{--enable-parport_ppdev} - Enable use of ppdev (/dev/parportN) for parport.
-@item
-@option{--enable-parport_giveio} - Enable use of giveio for parport instead of ioperm.
-@item
-@option{--enable-amtjtagaccel} - Enable building the Amontec JTAG-Accelerator driver.
-@item
-@option{--enable-ecosboard} - Enable building support for eCosBoard based JTAG debugger.
-@item
-@option{--enable-ioutil} - Enable ioutil functions - useful for standalone OpenOCD implementations.
-@item
-@option{--enable-httpd} - Enable builtin httpd server - useful for standalone OpenOCD implementations.
-@item
-@option{--enable-ep93xx} - Enable building support for EP93xx based SBCs.
-@item
-@option{--enable-at91rm9200} - Enable building support for AT91RM9200 based SBCs.
-@item
-@option{--enable-gw16012} - Enable building support for the Gateworks GW16012 JTAG programmer.
-@item
-@option{--enable-ft2232_ftd2xx} - Support FT2232-family chips using
-the closed-source library from FTDICHIP.COM
-(result not for re-distribution).
-@item
-@option{--enable-ft2232_libftdi} - Support FT2232-family chips using
-a GPL'd ft2232 support library (result OK for re-distribution).
-@item
-@option{--with-ftd2xx-win32-zipdir=PATH} - If using FTDICHIP.COM ft2232c driver,
-give the directory where the Win32 FTDICHIP.COM 'CDM' driver zip file was unpacked.
-@item
-@option{--with-ftd2xx-linux-tardir=PATH} - If using FTDICHIP.COM ft2232c driver
-on Linux, give the directory where the Linux driver's TAR.GZ file was unpacked.
-@item
-@option{--with-ftd2xx-lib=shared|static} - Linux only. Default: static.
-Specifies how the FTDICHIP.COM libftd2xx driver should be linked.
-Note: 'static' only works in conjunction with @option{--with-ftd2xx-linux-tardir}.
-The 'shared' value is supported, however you must manually install the required
-header files and shared libraries in an appropriate place.
-@item
-@option{--enable-presto_libftdi} - Enable building support for ASIX Presto programmer using the libftdi driver.
-@item
-@option{--enable-presto_ftd2xx} - Enable building support for ASIX Presto programmer using the FTD2XX driver.
-@item
-@option{--enable-usbprog} - Enable building support for the USBprog JTAG programmer.
-@item
-@option{--enable-oocd_trace} - Enable building support for the OpenOCD+trace ETM capture device.
-@item
-@option{--enable-jlink} - Enable building support for the Segger J-Link JTAG programmer.
-@item
-@option{--enable-vsllink} - Enable building support for the Versaloon-Link JTAG programmer.
-@item
-@option{--enable-rlink} - Enable building support for the Raisonance RLink JTAG programmer.
-@item
-@option{--enable-arm-jtag-ew} - Enable building support for the Olimex ARM-JTAG-EW programmer.
-@item
-@option{--enable-dummy} - Enable building the dummy port driver.
-@end itemize
-
-@section Parallel Port Dongles
-
-If you want to access the parallel port using the PPDEV interface you have to specify
-both the @option{--enable-parport} AND the @option{--enable-parport_ppdev} option since
-the @option{--enable-parport_ppdev} option actually is an option to the parport driver
-(see @uref{http://forum.sparkfun.com/viewtopic.php?t=3795} for more info).
-
-The same is true for the @option{--enable-parport_giveio} option, you have to
-use both the @option{--enable-parport} AND the @option{--enable-parport_giveio} option if you want to use giveio instead of ioperm parallel port access method.
-
-@section FT2232C Based USB Dongles
-
-There are 2 methods of using the FTD2232, either (1) using the
-FTDICHIP.COM closed source driver, or (2) the open (and free) driver
-libftdi. Some claim the (closed) FTDICHIP.COM solution is faster,
-which is the motivation for supporting it even though its licensing
-restricts it to non-redistributable OpenOCD binaries, and it is
-not available for all operating systems used with OpenOCD.
-
-The FTDICHIP drivers come as either a (win32) ZIP file, or a (Linux)
-TAR.GZ file. You must unpack them ``some where'' convient. As of this
-writing FTDICHIP does not supply means to install these
-files ``in an appropriate place''.
-As a result, there are two
-``./configure'' options that help.
-
-Below is an example build process:
-
-@enumerate
-@item Check out the latest version of ``openocd'' from SVN.
-
-@item If you are using the FTDICHIP.COM driver, download
-and unpack the Windows or Linux FTD2xx drivers
-(@uref{http://www.ftdichip.com/Drivers/D2XX.htm}).
-If you are using the libftdi driver, install that package
-(e.g. @command{apt-get install libftdi} on systems with APT).
-
-@example
-/home/duane/ftd2xx.win32 => the Cygwin/Win32 ZIP file contents
-/home/duane/libftd2xx0.4.16 => the Linux TAR.GZ file contents
-@end example
-
-@item Configure with options resembling the following.
-
-@enumerate a
-@item Cygwin FTDICHIP solution:
-@example
-./configure --prefix=/home/duane/mytools \
- --enable-ft2232_ftd2xx \
- --with-ftd2xx-win32-zipdir=/home/duane/ftd2xx.win32
-@end example
-
-@item Linux FTDICHIP solution:
-@example
-./configure --prefix=/home/duane/mytools \
- --enable-ft2232_ftd2xx \
- --with-ft2xx-linux-tardir=/home/duane/libftd2xx0.4.16
-@end example
-
-@item Cygwin/Linux LIBFTDI solution ... assuming that
-@itemize
-@item For Windows -- that the Windows port of LIBUSB is in place.
-@item For Linux -- that libusb has been built/installed and is in place.
-@item That libftdi has been built and installed (relies on libusb).
-@end itemize
-
-Then configure the libftdi solution like this:
-
-@example
-./configure --prefix=/home/duane/mytools \
- --enable-ft2232_libftdi
-@end example
-@end enumerate
-
-@item Then just type ``make'', and perhaps ``make install''.
-@end enumerate
-
-
-@section Miscellaneous Configure Options
-
-@itemize @bullet
-@item
-@option{--disable-option-checking} - Ignore unrecognized @option{--enable} and @option{--with} options.
-@item
-@option{--enable-gccwarnings} - Enable extra gcc warnings during build.
-Default is enabled.
-@item
-@option{--enable-release} - Enable building of an OpenOCD release, generally
-this is for developers. It simply omits the svn version string when the
-openocd @option{-v} is executed.
-@end itemize
-
@node JTAG Hardware Dongles
@chapter JTAG Hardware Dongles
@cindex dongles
Code Review / openocd.git / commitdiff