docs: add missing stm32 flash driver documentation

Change-Id: I433780646e6fdfd0c2527b4a68025946ccb79d8b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/4307
Tested-by: jenkins
Reviewed-by: <alexandre.torgue@st.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 2719c2d97f90ee78442e29a84297ba4bfa85973f..ac491b144cb28a767e808e9fbb33b3e159388743 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -5952,6 +5952,12 @@ Unlocks the entire stm32 device.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 

+@deffn Command {stm32f1x mass_erase} num
+Mass erases the entire stm32f1x device. This is the only way to
+unlock a protected flash (unless RDP Level is 2 which can't be unlocked at all).
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+

 @deffn Command {stm32f1x options_read} num
 Read and display the stm32 option bytes written by
 the @command{stm32f1x options_write} command.
 @deffn Command {stm32f1x options_read} num
 Read and display the stm32 option bytes written by
 the @command{stm32f1x options_write} command.


@@ -5970,6 +5976,10 @@ include internal flash and use ARM Cortex-M3/M4/M7 cores.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
 
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
 

+@example
+flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
+@end example
+

 Note that some devices have been found that have a flash size register that contains
 an invalid value, to workaround this issue you can override the probed value used by
 the flash driver.
 Note that some devices have been found that have a flash size register that contains
 an invalid value, to workaround this issue you can override the probed value used by
 the flash driver.


@@ -5990,6 +6000,12 @@ Unlocks the entire stm32 device.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 

+@deffn Command {stm32f2x mass_erase} num
+Mass erases the entire stm32f2x device. This is the only way to
+unlock a protected flash (unless RDP Level is 2 which can't be unlocked at all).
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+

 @deffn Command {stm32f2x options_read} num
 Reads and displays user options and (where implemented) boot_addr0, boot_addr1, optcr2.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @deffn Command {stm32f2x options_read} num
 Reads and displays user options and (where implemented) boot_addr0, boot_addr1, optcr2.
 The @var{num} parameter is a value shown by @command{flash banks}.


@@ -6015,6 +6031,10 @@ include internal flash and use ARM Cortex-M7 core.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
 
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
 

+@example
+flash bank $_FLASHNAME stm32h7x 0 0 0 0 $_TARGETNAME
+@end example
+

 Note that some devices have been found that have a flash size register that contains
 an invalid value, to workaround this issue you can override the probed value used by
 the flash driver.
 Note that some devices have been found that have a flash size register that contains
 an invalid value, to workaround this issue you can override the probed value used by
 the flash driver.


@@ -6034,6 +6054,12 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 Unlocks the entire stm32 device.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 Unlocks the entire stm32 device.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn

+
+@deffn Command {stm32h7x mass_erase} num
+Mass erases the entire stm32h7x device. This is the only way to
+unlock a protected flash (unless RDP Level is 2 which can't be unlocked at all).
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn

 @end deffn
 
 @deffn {Flash Driver} stm32lx
 @end deffn
 
 @deffn {Flash Driver} stm32lx


@@ -6042,6 +6068,10 @@ include internal flash and use ARM Cortex-M3 and Cortex-M0+ cores.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
 
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
 

+@example
+flash bank $_FLASHNAME stm32lx 0 0 0 0 $_TARGETNAME
+@end example
+

 Note that some devices have been found that have a flash size register that contains
 an invalid value, to workaround this issue you can override the probed value used by
 the flash driver. If you use 0 as the bank base address, it tells the
 Note that some devices have been found that have a flash size register that contains
 an invalid value, to workaround this issue you can override the probed value used by
 the flash driver. If you use 0 as the bank base address, it tells the


@@ -6062,6 +6092,43 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 @end deffn
 
 @end deffn
 @end deffn
 

+@deffn {Flash Driver} stm32l4x
+All members of the STM32L4 microcontroller families from ST Microelectronics
+include internal flash and use ARM Cortex-M4 cores.
+The driver automatically recognizes a number of these chips using
+the chip identification register, and autoconfigures itself.
+
+@example
+flash bank $_FLASHNAME stm32l4x 0 0 0 0 $_TARGETNAME
+@end example
+
+Note that some devices have been found that have a flash size register that contains
+an invalid value, to workaround this issue you can override the probed value used by
+the flash driver.
+
+@example
+flash bank $_FLASHNAME stm32l4x 0x08000000 0x40000 0 0 $_TARGETNAME
+@end example
+
+Some stm32l4x-specific commands are defined:
+
+@deffn Command {stm32l4x lock} num
+Locks the entire stm32 device.
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+
+@deffn Command {stm32l4x unlock} num
+Unlocks the entire stm32 device.
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+
+@deffn Command {stm32l4x mass_erase} num
+Mass erases the entire stm32l4x device. This is the only way to
+unlock a protected flash (unless RDP Level is 2 which can't be unlocked at all).
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+@end deffn
+

 @deffn {Flash Driver} str7x
 All members of the STR7 microcontroller family from ST Microelectronics
 include internal flash and use ARM7TDMI cores.
 @deffn {Flash Driver} str7x
 All members of the STR7 microcontroller family from ST Microelectronics
 include internal flash and use ARM7TDMI cores.