fm3: add Fujitsu MB9Ax family support 06/1506/2
authorNemui Trinomius <nemuisan_kawausogasuki@live.jp>
Tue, 16 Jul 2013 13:44:20 +0000 (14:44 +0100)
committerSpencer Oliver <spen@spen-soft.co.uk>
Sun, 8 Sep 2013 16:24:08 +0000 (16:24 +0000)
Not tested, adapted from http://tech.groups.yahoo.com/group/versaloon/message/391

Change-Id: I52048f6e8e66b38087fa249eb66ceab6801d07d5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1506
Tested-by: jenkins
src/flash/nor/fm3.c

index 32e8179..a9a11a3 100644 (file)
@@ -229,7 +229,7 @@ static int fm3_erase(struct flash_bank *bank, int first, int last)
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       LOG_INFO("Fujitsu MB9Bxxx: Sector Erase ... (%d to %d)", first, last);
+       LOG_INFO("Fujitsu MB9[A/B]FXXX: Sector Erase ... (%d to %d)", first, last);
 
        /* FASZR = 0x01, Enables CPU Programming Mode (16-bit Flash acccess) */
        retval = target_write_u32(target, 0x40000000, 0x0001);
@@ -296,7 +296,7 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
 {
        struct fm3_flash_bank *fm3_info = bank->driver_priv;
        struct target *target = bank->target;
-       uint32_t buffer_size = 2048;            /* 8192 for MB9Bxx6! */
+       uint32_t buffer_size = 2048;            /* Default minimum value */
        struct working_area *write_algorithm;
        struct working_area *source;
        uint32_t address = bank->base + offset;
@@ -307,6 +307,10 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
        uint32_t u32FlashSeqAddress1;
        uint32_t u32FlashSeqAddress2;
 
+       /* Increase buffer_size if needed */
+       if (buffer_size < (target->working_area_size / 2))
+               buffer_size = (target->working_area_size / 2);
+
        u32FlashType = (uint32_t) fm3_info->flashtype;
 
        if (u32FlashType == fm3_flash_type1) {
@@ -446,13 +450,13 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
        0x00, 0xBE,                                     /*        BKPT     #0                         */
 
        /* The following address pointers assume, that the code is running from   */
-       /* address 0x1FFF8008. These address pointers will be patched, if a       */
-       /* different start address in RAM is used (e.g. for Flash type 2)!        */
-       0x00, 0x80, 0xFF, 0x1F,     /* u32DummyRead address in RAM (0x1FFF8000)   */
-       0x04, 0x80, 0xFF, 0x1F      /* u32FlashResult address in RAM (0x1FFF8004) */
+       /* SRAM basic-address(BASE_ADDR)+8.These address pointers will be patched */
+       /* if a different start address in RAM is used (e.g. for Flash type 2)!   */
+       0x00, 0x80, 0xFF, 0x1F,     /* u32DummyRead address in RAM (BASE_ADDR)    */
+       0x04, 0x80, 0xFF, 0x1F      /* u32FlashResult address in RAM (BASE_ADDR+4)*/
        };
 
-       LOG_INFO("Fujitsu MB9B500: FLASH Write ...");
+       LOG_INFO("Fujitsu MB9[A/B]FXXX: FLASH Write ...");
 
        /* disable HW watchdog */
        retval = target_write_u32(target, 0x40011C00, 0x1ACCE551);
@@ -487,8 +491,6 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
        if (retval != ERROR_OK)
                return retval;
 
-
-
        /* memory buffer */
        while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) {
                buffer_size /= 2;
@@ -522,7 +524,7 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
                        break;
 
                /* Patching 'local variable address' for different RAM addresses */
-               if (write_algorithm->address != 0x1FFF8008) {
+               if (write_algorithm->address != (target->working_area_phys + 8)) {
                        /* Algorithm: u32DummyRead: */
                        retval = target_write_u32(target, (write_algorithm->address)
                                + sizeof(fm3_flash_write_code) - 8, (write_algorithm->address) - 8);