Change-Id: I2c66bf6da734a3b71e358553943e9fc3c6578c39
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4277
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
static int gdb_new_connection(struct connection *connection)
{
struct gdb_connection *gdb_connection = malloc(sizeof(struct gdb_connection));
static int gdb_new_connection(struct connection *connection)
{
struct gdb_connection *gdb_connection = malloc(sizeof(struct gdb_connection));
- struct gdb_service *gdb_service = connection->service->priv;
int retval;
int initial_ack;
int retval;
int initial_ack;
+ target = get_target_from_connection(connection);
connection->priv = gdb_connection;
/* initialize gdb connection information */
connection->priv = gdb_connection;
/* initialize gdb connection information */
* GDB session could leave dangling breakpoints if e.g. communication
* timed out.
*/
* GDB session could leave dangling breakpoints if e.g. communication
* timed out.
*/
- breakpoint_clear_target(gdb_service->target);
- watchpoint_clear_target(gdb_service->target);
+ breakpoint_clear_target(target);
+ watchpoint_clear_target(target);
/* clean previous rtos session if supported*/
/* clean previous rtos session if supported*/
- if ((gdb_service->target->rtos) && (gdb_service->target->rtos->type->clean))
- gdb_service->target->rtos->type->clean(gdb_service->target);
+ if ((target->rtos) && (target->rtos->type->clean))
+ target->rtos->type->clean(target);
/* remove the initial ACK from the incoming buffer */
retval = gdb_get_char(connection, &initial_ack);
/* remove the initial ACK from the incoming buffer */
retval = gdb_get_char(connection, &initial_ack);
*/
if (initial_ack != '+')
gdb_putback_char(connection, initial_ack);
*/
if (initial_ack != '+')
gdb_putback_char(connection, initial_ack);
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_ATTACH);
+ target_call_event_callbacks(target, TARGET_EVENT_GDB_ATTACH);
if (gdb_use_memory_map) {
/* Connect must fail if the memory map can't be set up correctly.
if (gdb_use_memory_map) {
/* Connect must fail if the memory map can't be set up correctly.
for (i = 0; i < flash_get_bank_count(); i++) {
struct flash_bank *p;
p = get_flash_bank_by_num_noprobe(i);
for (i = 0; i < flash_get_bank_count(); i++) {
struct flash_bank *p;
p = get_flash_bank_by_num_noprobe(i);
- if (p->target != gdb_service->target)
+ if (p->target != target)
continue;
retval = get_flash_bank_by_num(i, &p);
if (retval != ERROR_OK) {
continue;
retval = get_flash_bank_by_num(i, &p);
if (retval != ERROR_OK) {
gdb_actual_connections++;
LOG_DEBUG("New GDB Connection: %d, Target %s, state: %s",
gdb_actual_connections,
gdb_actual_connections++;
LOG_DEBUG("New GDB Connection: %d, Target %s, state: %s",
gdb_actual_connections,
- target_name(gdb_service->target),
- target_state_name(gdb_service->target));
+ target_name(target),
+ target_state_name(target));
/* DANGER! If we fail subsequently, we must remove this handler,
* otherwise we occasionally see crashes as the timer can invoke the
/* DANGER! If we fail subsequently, we must remove this handler,
* otherwise we occasionally see crashes as the timer can invoke the
static int gdb_connection_closed(struct connection *connection)
{
static int gdb_connection_closed(struct connection *connection)
{
- struct gdb_service *gdb_service = connection->service->priv;
struct gdb_connection *gdb_connection = connection->priv;
struct gdb_connection *gdb_connection = connection->priv;
+ target = get_target_from_connection(connection);
+
/* we're done forwarding messages. Tear down callback before
* cleaning up connection.
*/
/* we're done forwarding messages. Tear down callback before
* cleaning up connection.
*/
gdb_actual_connections--;
LOG_DEBUG("GDB Close, Target: %s, state: %s, gdb_actual_connections=%d",
gdb_actual_connections--;
LOG_DEBUG("GDB Close, Target: %s, state: %s, gdb_actual_connections=%d",
- target_name(gdb_service->target),
- target_state_name(gdb_service->target),
+ target_name(target),
+ target_state_name(target),
gdb_actual_connections);
/* see if an image built with vFlash commands is left */
gdb_actual_connections);
/* see if an image built with vFlash commands is left */
}
/* if this connection registered a debug-message receiver delete it */
}
/* if this connection registered a debug-message receiver delete it */
- delete_debug_msg_receiver(connection->cmd_ctx, gdb_service->target);
+ delete_debug_msg_receiver(connection->cmd_ctx, target);
if (connection->priv) {
free(connection->priv);
if (connection->priv) {
free(connection->priv);
target_unregister_event_callback(gdb_target_callback_event_handler, connection);
target_unregister_event_callback(gdb_target_callback_event_handler, connection);
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_END);
+ target_call_event_callbacks(target, TARGET_EVENT_GDB_END);
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_DETACH);
+ target_call_event_callbacks(target, TARGET_EVENT_GDB_DETACH);
char const *packet, int packet_size)
{
struct gdb_connection *gdb_connection = connection->priv;
char const *packet, int packet_size)
{
struct gdb_connection *gdb_connection = connection->priv;
- struct gdb_service *gdb_service = connection->service->priv;
+ target = get_target_from_connection(connection);
+
/* if flash programming disabled - send a empty reply */
if (gdb_flash_program == 0) {
/* if flash programming disabled - send a empty reply */
if (gdb_flash_program == 0) {
flash_set_dirty();
/* perform any target specific operations before the erase */
flash_set_dirty();
/* perform any target specific operations before the erase */
- target_call_event_callbacks(gdb_service->target,
+ target_call_event_callbacks(target,
TARGET_EVENT_GDB_FLASH_ERASE_START);
/* vFlashErase:addr,length messages require region start and
* end to be "block" aligned ... if padding is ever needed,
* GDB will have become dangerously confused.
*/
TARGET_EVENT_GDB_FLASH_ERASE_START);
/* vFlashErase:addr,length messages require region start and
* end to be "block" aligned ... if padding is ever needed,
* GDB will have become dangerously confused.
*/
- result = flash_erase_address_range(gdb_service->target,
- false, addr, length);
+ result = flash_erase_address_range(target, false, addr,
+ length);
/* perform any target specific operations after the erase */
/* perform any target specific operations after the erase */
- target_call_event_callbacks(gdb_service->target,
+ target_call_event_callbacks(target,
TARGET_EVENT_GDB_FLASH_ERASE_END);
/* perform erase */
TARGET_EVENT_GDB_FLASH_ERASE_END);
/* perform erase */
/* process the flashing buffer. No need to erase as GDB
* always issues a vFlashErase first. */
/* process the flashing buffer. No need to erase as GDB
* always issues a vFlashErase first. */
- target_call_event_callbacks(gdb_service->target,
+ target_call_event_callbacks(target,
TARGET_EVENT_GDB_FLASH_WRITE_START);
TARGET_EVENT_GDB_FLASH_WRITE_START);
- result = flash_write(gdb_service->target, gdb_connection->vflash_image, &written, 0);
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_WRITE_END);
+ result = flash_write(target, gdb_connection->vflash_image,
+ &written, 0);
+ target_call_event_callbacks(target,
+ TARGET_EVENT_GDB_FLASH_WRITE_END);
if (result != ERROR_OK) {
if (result == ERROR_FLASH_DST_OUT_OF_BANK)
gdb_put_packet(connection, "E.memtype", 9);
if (result != ERROR_OK) {
if (result == ERROR_FLASH_DST_OUT_OF_BANK)
gdb_put_packet(connection, "E.memtype", 9);
static int gdb_detach(struct connection *connection)
{
static int gdb_detach(struct connection *connection)
{
- struct gdb_service *gdb_service = connection->service->priv;
-
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_DETACH);
+ target_call_event_callbacks(get_target_from_connection(connection),
+ TARGET_EVENT_GDB_DETACH);
return gdb_put_packet(connection, "OK", 2);
}
return gdb_put_packet(connection, "OK", 2);
}
/* Do not allocate this on the stack */
static char gdb_packet_buffer[GDB_BUFFER_SIZE];
/* Do not allocate this on the stack */
static char gdb_packet_buffer[GDB_BUFFER_SIZE];
- struct gdb_service *gdb_service = connection->service->priv;
- struct target *target = gdb_service->target;
char const *packet = gdb_packet_buffer;
int packet_size;
int retval;
struct gdb_connection *gdb_con = connection->priv;
static int extended_protocol;
char const *packet = gdb_packet_buffer;
int packet_size;
int retval;
struct gdb_connection *gdb_con = connection->priv;
static int extended_protocol;
+ target = get_target_from_connection(connection);
+
/* drain input buffer. If one of the packets fail, then an error
* packet is replied, if applicable.
*
/* drain input buffer. If one of the packets fail, then an error
* packet is replied, if applicable.
*
break;
case 'R':
/* handle extended restart packet */
break;
case 'R':
/* handle extended restart packet */
- breakpoint_clear_target(gdb_service->target);
- watchpoint_clear_target(gdb_service->target);
+ breakpoint_clear_target(target);
+ watchpoint_clear_target(target);
command_run_linef(connection->cmd_ctx, "ocd_gdb_restart %s",
target_name(target));
/* set connection as attached after reset */
command_run_linef(connection->cmd_ctx, "ocd_gdb_restart %s",
target_name(target));
/* set connection as attached after reset */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)