David Brownell <david-b@pacbell.net>

Fix docs on ARM11 MCR and MRC coprocessor commands:
correct read-vs-write; and describe the params.

(ARM920 and ARM926 have cp15-specific commands; this
approach is more generic.  MCR2, MRC2, MCRR, MCRR2,
MRRC, and MRRC2 instructions could also get exposed.)

git-svn-id: svn://svn.berlios.de/openocd/trunk@2679 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 183ec2de8247d019f3323ea19c18a1253898cb75..62bb1eb8f95a1d845d457aa85589d591c2985d83 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -5038,8 +5038,13 @@ Without arguments, the current settings are displayed.
 @subsection ARM11 specific commands
 @cindex ARM11
 
-@deffn Command {arm11 mcr} p1 p2 p3 p4 p5
-Read coprocessor register
+@deffn Command {arm11 mcr} pX opc1 CRn CRm opc2 value
+Write @var{value} to a coprocessor @var{pX} register
+passing parameters @var{CRn},
+@var{CRm}, opcodes @var{opc1} and @var{opc2},
+and the MCR instruction.
+(The difference beween this and the MCR2 instruction is
+one bit in the encoding, effecively a fifth parameter.)
 @end deffn
 
 @deffn Command {arm11 memwrite burst} [value]
@@ -5054,8 +5059,13 @@ which is enabled by default.
 If @var{value} is defined, first assigns that.
 @end deffn
 
-@deffn Command {arm11 mrc} p1 p2 p3 p4 p5 value
-Write coprocessor register
+@deffn Command {arm11 mrc} pX opc1 CRn CRm opc2
+Read a coprocessor @var{pX} register passing parameters @var{CRn},
+@var{CRm}, opcodes @var{opc1} and @var{opc2},
+and the MRC instruction.
+(The difference beween this and the MRC2 instruction is
+one bit in the encoding, effecively a fifth parameter.)
+Displays the result.
 @end deffn
 
 @deffn Command {arm11 no_increment}  [value]