stm32f30x: Add boundary scan TAP ID to match silicon 54/1354/2
authorAndreas Fritiofson <andreas.fritiofson@gmail.com>
Sat, 20 Apr 2013 15:29:46 +0000 (17:29 +0200)
committerFreddie Chopin <freddie.chopin@gmail.com>
Sun, 21 Apr 2013 07:19:35 +0000 (07:19 +0000)
Change-Id: I74ef3cfc437540aedd99da46ac3e0c6cd9c5cd8d
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1354
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
tcl/target/stm32f3x.cfg

index 1f05143..31993ff 100644 (file)
@@ -44,11 +44,12 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 if { [info exists BSTAPID] } {
    set _BSTAPID $BSTAPID
 } else {
-  # See STM Document RM0316
-  # Section 29.6.2
-  set _BSTAPID 0x06432041
+  # STM Document RM0316 rev 2 Section 30.6.2 says 0x06432041
+  # but STM32F303VCT6 rev Y has 0x06422041
+  set _BSTAPID1 0x06422041
+  set _BSTAPID2 0x06432041
 }
-jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
+jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
 
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME