AM335x: Disable watchdog on 'reset halt' 91/3391/2
authorHarald Welte <laforge@gnumonks.org>
Wed, 30 Mar 2016 09:19:16 +0000 (11:19 +0200)
committerFreddie Chopin <freddie.chopin@gmail.com>
Fri, 4 Nov 2016 21:22:32 +0000 (21:22 +0000)
At least on my (phyCORE-AM335X) system, the AM335x watchdog
needs to be disabled to use OpenOCD for more than 6.5 seconds
after reset.

Change-Id: I3d883a9f572b0ccb92f9864853a00c372e39d7f2
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Reviewed-on: http://openocd.zylin.com/3391
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
tcl/target/am335x.cfg

index 7409615..3ca196b 100644 (file)
@@ -76,3 +76,35 @@ target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -dbgbase 0x80
 
 # SRAM: 64K at 0x4030.0000; use the first 16K
 $_TARGETNAME configure -work-area-phys 0x40300000 -work-area-size 0x4000
+
+
+# when putting the target into 'reset halt', we need to disable the watchdog as
+# it would otherwise trigger while we're in JTAG
+# FIXME: unify with target/am437x.cfg
+source [find mem_helper.tcl]
+set  WDT1_BASE_ADDR                  0x44e35000
+set  WDT1_W_PEND_WSPR                [expr       $WDT1_BASE_ADDR     +  0x0034]
+set  WDT1_WSPR                       [expr       $WDT1_BASE_ADDR     +  0x0048]
+proc disable_watchdog { } {
+       global WDT1_WSPR
+       global WDT1_W_PEND_WSPR
+       global _TARGETNAME
+
+       set curstate [$_TARGETNAME curstate]
+
+       if { [string compare $curstate halted] == 0 } {
+               set WDT_DISABLE_SEQ1    0xaaaa
+               set WDT_DISABLE_SEQ2    0x5555
+
+               mww phys $WDT1_WSPR $WDT_DISABLE_SEQ1
+
+               # Empty body to make sure this executes as fast as possible.
+               # We don't want any delays here otherwise romcode might start
+               # executing and end up changing state of certain IPs.
+               while { [expr [mrw $WDT1_W_PEND_WSPR] & 0x10] } { }
+
+               mww phys $WDT1_WSPR $WDT_DISABLE_SEQ2
+               while { [expr [mrw $WDT1_W_PEND_WSPR] & 0x10] } { }
+       }
+}
+$_TARGETNAME configure -event reset-end { disable_watchdog }