Restore normal development cycle

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

diff --git a/NEWS b/NEWS
index e920a9c69ef26f26d4c30bf15033028145cdc3ea..9df165004a17b561a1a9b7f37a9506a7cfb53a6f 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -2,92 +2,16 @@ This file includes highlights of the changes made in the OpenOCD
 source archive release.
 
 JTAG Layer:
 source archive release.
 
 JTAG Layer:

-       * SWD support with FTDI, Versaloon, J-Link, sysfsgpio
-       * CMSIS-DAP massive speed and stability improvements
-       * Versaloon driver ported to libusb-1.0
-       * STLink can reestablish communication with a target that was
-          disconnected or rebooted
-       * STLink FAULT and WAIT SWD handling improved
-       * New hla_serial command to distinguish between several HLA
-          adapters attached to a single machine
-       * Serial number support for CMSIS-DAP and J-Link adapters
-       * Support for more J-Link adapters
-       * TAP autoprobing improvements
-       * Big speedup for SVF playback with USB Blaster

 
 Boundary Scan:
 
 Target Layer:
 
 Boundary Scan:
 
 Target Layer:

-       * Stability improvements for targets that get disconnected or
-          rebooted during a debug session
-       * MIPS speed and reliability improvements
-       * MIPS 1.5/2.0 fixes
-       * ARMv7-R improvements
-       * Cortex-A improvements, A7, A15 MPCores support
-       * FPU support for ARMv7-M (Cortex-M4F)
-       * TPIU/ITM support (including SWO/SWV tracing), can be
-          captured with external tools or STLink
-       * JTAG Serial Port (Advanced Debug System softcore) support
-       * Profiling support for OpenRISC
-       * ChibiOS/RT 3.0 support (with and without FPU)
-       * FreeRTOS current versions support
-       * Freescale MQX RTOS support
-       * GDB target description support for MIPS
-       * The last created target is auto-selected as the current

 
 Flash Layer:
 
 Flash Layer:

-       * nRF51 async loader to improve flashing performance and stability
-       * Cypress PSoC 41xx/42xx and CCG1 families flash driver
-       * Silabs SiM3 family flash driver
-       * Marvell Wireless Microcontroller SPI flash driver
-       * Kinetis mass erase (part unsecuring) implemented
-       * lpcspifi stability fixes
-       * STM32 family sync with reference manuals, L0 support, bugfixes
-       * LPC2000 driver automatically determines part and flash size
-       * NXP LPC11(x)xx, LPC13xx, LPC15xx, LPC8xx, LPC5410x, LPC407x support
-       * Atmel SAMD, SAMR, SAML21 devices support
-       * Atmel SAM4E16 support
-       * ZeroGecko family support
-       * TI Tiva C Blizzard and Snowflake families support
-       * Nuvoton NuMicro M051 support

 
 Board, Target, and Interface Configuration Scripts:
 
 Board, Target, and Interface Configuration Scripts:

-       * Normal target configs can work with HLA (STLink, ICDI) adapters
-       * STM32 discovery and Nucleo boards configs
-       * Gumstix AeroCore board config
-       * General Plus GP326XXXA target config
-       * Micrel KS869x target config
-       * ASUS RT-N66U board config
-       * Atmel SAM4E-EK board config
-       * Atmel AT91SAM4L proper reset handling implemented
-       * TI OMAP/AM 3505, 3517 target configs
-       * nRF51822-mKIT board config
-       * RC Module К1879ХБ1Я target config
-       * TI TMDX570LS20SUSB board config
-       * TI TMS570 USB Kit board config
-       * TI CC2538, CC26xx target configs
-       * TI AM437x major config improvements, DDR support
-       * TI AM437X IDK board config
-       * TI SimpleLink Wi-Fi CC3200 LaunchPad configs
-       * Silicon Labs EM357, EM358 target configs
-       * Infineon XMC1000, XMC4000 family targets and boards configs
-       * Atheros AR9331 target config
-       * TP-LINK TL-MR3020 board config
-       * Alphascale asm9260t target and eval kit configs
-       * Olimex SAM7-LA2 (AT91SAM7A2) board config
-       * EFM32 Gecko boards configs
-       * Spansion FM4 target and SK-FM4-176L-S6E2CC board configs
-       * LPC1xxx target configs were restructured
-       * IoT-LAB debug adapter config
-       * DP BusBlaster KT-Link compatible config

 
 Server Layer:
 
 Server Layer:

-       * Polling period can be configured
-       * "shutdown" command has an immediate effect
-       * The "program" command doesn't lead to a shutdown by
-          default, use optional "exit" parameter for the old behaviour
-       * Proper OS signal handling was implemented
-       * Async target notifications for the Tcl RPC

 
 Documentation:
 
 
 Documentation:
 


@@ -98,7 +22,7 @@ This release also contains a number of other important functional and
 cosmetic bugfixes. For more details about what has changed since the
 last release, see the git repository history:
 
 cosmetic bugfixes. For more details about what has changed since the
 last release, see the git repository history:
 

-http://sourceforge.net/p/openocd/code/ci/v0.9.0/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=

 
 
 For older NEWS, see the NEWS files associated with each release
 
 
 For older NEWS, see the NEWS files associated with each release

diff --git a/NEWS-0.9.0 b/NEWS-0.9.0
new file mode 100644 (file)
index 0000000..77ae4b0
--- /dev/null
+++ b/NEWS-0.9.0
@@ -0,0 +1,110 @@
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
+
+JTAG Layer:
+       * SWD support with FTDI, Versaloon, J-Link, sysfsgpio
+       * CMSIS-DAP massive speed and stability improvements
+       * Versaloon driver ported to libusb-1.0
+       * STLink can reestablish communication with a target that was
+          disconnected or rebooted
+       * STLink FAULT and WAIT SWD handling improved
+       * New hla_serial command to distinguish between several HLA
+          adapters attached to a single machine
+       * Serial number support for CMSIS-DAP and J-Link adapters
+       * Support for more J-Link adapters
+       * TAP autoprobing improvements
+       * Big speedup for SVF playback with USB Blaster
+
+Boundary Scan:
+
+Target Layer:
+       * Stability improvements for targets that get disconnected or
+          rebooted during a debug session
+       * MIPS speed and reliability improvements
+       * MIPS 1.5/2.0 fixes
+       * ARMv7-R improvements
+       * Cortex-A improvements, A7, A15 MPCores support
+       * FPU support for ARMv7-M (Cortex-M4F)
+       * TPIU/ITM support (including SWO/SWV tracing), can be
+          captured with external tools or STLink
+       * JTAG Serial Port (Advanced Debug System softcore) support
+       * Profiling support for OpenRISC
+       * ChibiOS/RT 3.0 support (with and without FPU)
+       * FreeRTOS current versions support
+       * Freescale MQX RTOS support
+       * GDB target description support for MIPS
+       * The last created target is auto-selected as the current
+
+Flash Layer:
+       * nRF51 async loader to improve flashing performance and stability
+       * Cypress PSoC 41xx/42xx and CCG1 families flash driver
+       * Silabs SiM3 family flash driver
+       * Marvell Wireless Microcontroller SPI flash driver
+       * Kinetis mass erase (part unsecuring) implemented
+       * lpcspifi stability fixes
+       * STM32 family sync with reference manuals, L0 support, bugfixes
+       * LPC2000 driver automatically determines part and flash size
+       * NXP LPC11(x)xx, LPC13xx, LPC15xx, LPC8xx, LPC5410x, LPC407x support
+       * Atmel SAMD, SAMR, SAML21 devices support
+       * Atmel SAM4E16 support
+       * ZeroGecko family support
+       * TI Tiva C Blizzard and Snowflake families support
+       * Nuvoton NuMicro M051 support
+       * EZR32 support in EFM32 driver
+
+Board, Target, and Interface Configuration Scripts:
+       * Normal target configs can work with HLA (STLink, ICDI) adapters
+       * STM32 discovery and Nucleo boards configs
+       * Gumstix AeroCore board config
+       * General Plus GP326XXXA target config
+       * Micrel KS869x target config
+       * ASUS RT-N66U board config
+       * Atmel SAM4E-EK board config
+       * Atmel AT91SAM4L proper reset handling implemented
+       * TI OMAP/AM 3505, 3517 target configs
+       * nRF51822-mKIT board config
+       * RC Module К1879ХБ1Я target config
+       * TI TMDX570LS20SUSB board config
+       * TI TMS570 USB Kit board config
+       * TI CC2538, CC26xx target configs
+       * TI AM437x major config improvements, DDR support
+       * TI AM437X IDK board config
+       * TI SimpleLink Wi-Fi CC3200 LaunchPad configs
+       * Silicon Labs EM357, EM358 target configs
+       * Infineon XMC1000, XMC4000 family targets and boards configs
+       * Atheros AR9331 target config
+       * TP-LINK TL-MR3020 board config
+       * Alphascale asm9260t target and eval kit configs
+       * Olimex SAM7-LA2 (AT91SAM7A2) board config
+       * EFM32 Gecko boards configs
+       * Spansion FM4 target and SK-FM4-176L-S6E2CC board configs
+       * LPC1xxx target configs were restructured
+       * IoT-LAB debug adapter config
+       * DP BusBlaster KT-Link compatible config
+
+Server Layer:
+       * Polling period can be configured
+       * "shutdown" command has an immediate effect
+       * The "program" command doesn't lead to a shutdown by
+          default, use optional "exit" parameter for the old behaviour
+       * Proper OS signal handling was implemented
+       * Async target notifications for the Tcl RPC
+
+Documentation:
+
+Build and Release:
+
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.9.0/log/?path=
+
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
+
+For more information about contributing test reports, bug fixes, or new
+features and device support, please read the new Developer Manual (or
+the BUGS and PATCHES.txt files in the source archive).

diff --git a/configure.ac b/configure.ac
index 10228081a794ce406a32b162447308526975c9db..687a404fd61c7b440f5e373bd053c1a79bb02885 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -1,5 +1,5 @@
 AC_PREREQ(2.64)
 AC_PREREQ(2.64)

-AC_INIT([openocd], [0.9.0],
+AC_INIT([openocd], [0.10.0-dev],

   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])
 
   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])