Change-Id: I3009920f512f76901d187318ee50284db34ab6f7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/924
Tested-by: jenkins
@item add "options usb-storage quirks=483:3744:i" to /etc/modprobe.conf
@end itemize
@item add "options usb-storage quirks=483:3744:i" to /etc/modprobe.conf
@end itemize
+@section USB TI/Stellaris ICDI based
+Texas Instruments has an adapter called @b{ICDI}.
+It is not to be confused with the FTDI based adapters that were originally fitted to their
+evaluation boards. This is the adapter fitted to the Stellaris LaunchPad.
+
@section USB Other
@itemize @bullet
@item @b{USBprog}
@section USB Other
@itemize @bullet
@item @b{USBprog}
@end quotation
@end deffn
@end quotation
@end deffn
-@deffn {Interface Driver} {stlink}
-ST Micro ST-LINK adapter.
+@deffn {Interface Driver} {hla}
+This is a driver that supports multiple High Level Adapters.
+This type of adapter does not expose some of the lower level api's
+that OpenOCD would normally use to access the target.
+
+Currently supported adapters include the ST STLINK and TI ICDI.
-@deffn {Config Command} {stlink_device_desc} description
+@deffn {Config Command} {hla_device_desc} description
Currently Not Supported.
@end deffn
Currently Not Supported.
@end deffn
-@deffn {Config Command} {stlink_serial} serial
+@deffn {Config Command} {hla_serial} serial
Currently Not Supported.
@end deffn
Currently Not Supported.
@end deffn
-@deffn {Config Command} {stlink_layout} (@option{sg}|@option{usb})
-Specifies the stlink layout to use.
+@deffn {Config Command} {hla_layout} (@option{stlink}|@option{icdi})
+Specifies the adapter layout to use.
-@deffn {Config Command} {stlink_vid_pid} vid pid
-The vendor ID and product ID of the STLINK device.
+@deffn {Config Command} {hla_vid_pid} vid pid
+The vendor ID and product ID of the device.
@end deffn
@deffn {Config Command} {stlink_api} api_level
@end deffn
@deffn {Config Command} {stlink_api} api_level
-Manually sets the stlink api used, valid options are 1 or 2.
+Manually sets the stlink api used, valid options are 1 or 2. (@b{STLINK Only}).
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)