target/cortex_m: return error if breakpoint address is out of range

If the "Flash Patch and Breakpoint" unit is rev.1 then it can only
accept breakpoint addresses below 0x1FFFFFFF.
Detailed info in "ARM v7-M Architecture Reference Manual", DDI0403E
at chapter "C1.11 Flash Patch and Breakpoint unit".

Print a message and return error if the address of hardware
breakpoint cannot be handled by the breakpoint unit.

Change-Id: I95c92b1f058f0dfc568bf03015f99e439b27c59b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4535
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>

diff --git a/src/target/cortex_m.c b/src/target/cortex_m.c
index b6043fccfb64836d80a3adeef2c1f374c5c61425..d1afbd569a6261f10b37f3a5fe6ccd24a57c378f 100644 (file)
--- a/src/target/cortex_m.c
+++ b/src/target/cortex_m.c
@@ -1137,6 +1137,10 @@ int cortex_m_set_breakpoint(struct target *target, struct breakpoint *breakpoint
                breakpoint->set = fp_num + 1;
                fpcr_value = breakpoint->address | 1;
                if (cortex_m->fp_rev == 0) {
                breakpoint->set = fp_num + 1;
                fpcr_value = breakpoint->address | 1;
                if (cortex_m->fp_rev == 0) {

+                       if (breakpoint->address > 0x1FFFFFFF) {
+                               LOG_ERROR("Cortex-M Flash Patch Breakpoint rev.1 cannot handle HW breakpoint above address 0x1FFFFFFE");
+                               return ERROR_FAIL;
+                       }

                        uint32_t hilo;
                        hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
                        fpcr_value = (fpcr_value & 0x1FFFFFFC) | hilo | 1;
                        uint32_t hilo;
                        hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
                        fpcr_value = (fpcr_value & 0x1FFFFFFC) | hilo | 1;