Kinetis: Flash command function matches datasheet 92/1192/6
authorAlex Austin <alex.austin@spectrumdsi.com>
Sun, 3 Mar 2013 10:08:18 +0000 (04:08 -0600)
committerSpencer Oliver <spen@spen-soft.co.uk>
Wed, 13 Mar 2013 12:29:17 +0000 (12:29 +0000)
The kinetis datasheets specify the flash registers as bytes rather
than as words, as the previous implementation did.  This also makes
a few code sections slightly less endian-magical.

Change-Id: If8f4adfc7f4341085ae5b6eacbf7d74bbd74cf08
Signed-off-by: Alex Austin <alex.austin@spectrumdsi.com>
Reviewed-on: http://openocd.zylin.com/1192
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
src/flash/nor/kinetis.c

index 43075fe..494c266 100644 (file)
@@ -213,47 +213,48 @@ static int kinetis_protect_check(struct flash_bank *bank)
        return ERROR_OK;
 }
 
-static int kinetis_ftfx_command(struct flash_bank *bank, uint32_t w0,
-                               uint32_t w1, uint32_t w2, uint8_t *ftfx_fstat)
+static int kinetis_ftfx_command(struct flash_bank *bank, uint8_t fcmd, uint32_t faddr,
+                               uint8_t fccob4, uint8_t fccob5, uint8_t fccob6, uint8_t fccob7,
+                               uint8_t fccob8, uint8_t fccob9, uint8_t fccoba, uint8_t fccobb,
+                               uint8_t *ftfx_fstat)
 {
-       uint8_t buffer[12];
+       uint8_t command[12] = {faddr & 0xff, (faddr >> 8) & 0xff, (faddr >> 16) & 0xff, fcmd,
+                              fccob7, fccob6, fccob5, fccob4,
+                              fccobb, fccoba, fccob9, fccob8};
        int result, i;
+       uint8_t buffer;
 
        /* wait for done */
        for (i = 0; i < 50; i++) {
                result =
-                       target_read_memory(bank->target, FTFx_FSTAT, 1, 1, buffer);
+                       target_read_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
 
                if (result != ERROR_OK)
                        return result;
 
-               if (buffer[0] & 0x80)
+               if (buffer & 0x80)
                        break;
 
-               buffer[0] = 0x00;
+               buffer = 0x00;
        }
 
-       if (buffer[0] != 0x80) {
+       if (buffer != 0x80) {
                /* reset error flags */
-               buffer[0] = 0x30;
+               buffer = 0x30;
                result =
-                       target_write_memory(bank->target, FTFx_FSTAT, 1, 1, buffer);
+                       target_write_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
                if (result != ERROR_OK)
                        return result;
        }
 
-       target_buffer_set_u32(bank->target, buffer, w0);
-       target_buffer_set_u32(bank->target, buffer + 4, w1);
-       target_buffer_set_u32(bank->target, buffer + 8, w2);
-
-       result = target_write_memory(bank->target, FTFx_FCCOB3, 4, 3, buffer);
+       result = target_write_memory(bank->target, FTFx_FCCOB3, 4, 3, command);
 
        if (result != ERROR_OK)
                return result;
 
        /* start command */
-       buffer[0] = 0x80;
-       result = target_write_memory(bank->target, FTFx_FSTAT, 1, 1, buffer);
+       buffer = 0x80;
+       result = target_write_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
        if (result != ERROR_OK)
                return result;
 
@@ -271,9 +272,10 @@ static int kinetis_ftfx_command(struct flash_bank *bank, uint32_t w0,
 
        if ((*ftfx_fstat & 0xf0) != 0x80) {
                LOG_ERROR
-                       ("ftfx command failed FSTAT: %02X W0: %08X W1: %08X W2: %08X",
-                        *ftfx_fstat, w0, w1, w2);
-
+                       ("ftfx command failed FSTAT: %02X FCCOB: %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X",
+                        *ftfx_fstat, command[3], command[2], command[1], command[0],
+                                     command[7], command[6], command[5], command[4],
+                                     command[11], command[10], command[9], command[8]);
                return ERROR_FLASH_OPERATION_FAILED;
        }
 
@@ -283,7 +285,6 @@ static int kinetis_ftfx_command(struct flash_bank *bank, uint32_t w0,
 static int kinetis_erase(struct flash_bank *bank, int first, int last)
 {
        int result, i;
-       uint32_t w0 = 0, w1 = 0, w2 = 0;
 
        if (bank->target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
@@ -301,9 +302,8 @@ static int kinetis_erase(struct flash_bank *bank, int first, int last)
        for (i = first; i <= last; i++) {
                uint8_t ftfx_fstat;
                /* set command and sector address */
-               w0 = (FTFx_CMD_SECTERASE << 24) | (bank->base + bank->sectors[i].offset);
-
-               result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
+               result = kinetis_ftfx_command(bank, FTFx_CMD_SECTERASE, bank->base + bank->sectors[i].offset,
+                                             0, 0, 0, 0,  0, 0, 0, 0,  &ftfx_fstat);
 
                if (result != ERROR_OK) {
                        LOG_WARNING("erase sector %d failed", i);
@@ -326,7 +326,7 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
 {
        unsigned int i, result, fallback = 0;
        uint8_t buf[8];
-       uint32_t wc, w0 = 0, w1 = 0, w2 = 0;
+       uint32_t wc;
        struct kinetis_flash_bank *kinfo = bank->driver_priv;
 
        if (bank->target->state != TARGET_HALTED) {
@@ -340,9 +340,7 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
                LOG_DEBUG("flash write into FlexNVM @%08X", offset);
 
                /* make flex ram available */
-               w0 = (FTFx_CMD_SETFLEXRAM << 24) | 0x00ff0000;
-
-               result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
+               result = kinetis_ftfx_command(bank, FTFx_CMD_SETFLEXRAM, 0x00ff0000, 0, 0, 0, 0,  0, 0, 0, 0,  &ftfx_fstat);
 
                if (result != ERROR_OK)
                        return ERROR_FLASH_OPERATION_FAILED;
@@ -411,7 +409,7 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
                        }
 
                        LOG_DEBUG("write section @ %08X with length %d bytes",
-                                 offset + i, (count - i));
+                                 offset + i, wc*4);
 
                        /* write data to flexram as whole-words */
                        result = target_write_memory(bank->target, FLEXRAM, 4, wc,
@@ -436,10 +434,9 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
                        }
 
                        /* execute section-write command */
-                       w0 = (FTFx_CMD_SECTWRITE << 24) | (bank->base + offset + i);
-                       w1 = section_count << 16;
-
-                       result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
+                       result = kinetis_ftfx_command(bank, FTFx_CMD_SECTWRITE, bank->base + offset + i,
+                                                     section_count>>8, section_count, 0, 0,
+                                                     0, 0, 0, 0,  &ftfx_fstat);
 
                        if (result != ERROR_OK)
                                return ERROR_FLASH_OPERATION_FAILED;
@@ -452,16 +449,11 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
 
                        LOG_DEBUG("write longword @ %08X", offset + i);
 
-                       w0 = (FTFx_CMD_LWORDPROG << 24) | (bank->base + offset + i);
-                       if (count - i < 4) {
-                               uint32_t padding = 0xffffffff;
-                               memcpy(&padding, buffer + i, count - i);
-                               w1 = buf_get_u32(&padding, 0, 32);
-                       } else {
-                               w1 = buf_get_u32(buffer + i, 0, 32);
-                       }
-
-                       result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
+                       uint8_t padding[4] = {0xff, 0xff, 0xff, 0xff};
+                       memcpy(padding, buffer + i, MIN(4, count-i));
+                       result = kinetis_ftfx_command(bank, FTFx_CMD_LWORDPROG, bank->base + offset + i,
+                                                     padding[3], padding[2], padding[1], padding[0],
+                                                     0, 0, 0, 0,  &ftfx_fstat);
 
                        if (result != ERROR_OK)
                                return ERROR_FLASH_OPERATION_FAILED;
@@ -764,14 +756,10 @@ static int kinetis_blank_check(struct flash_bank *bank)
 
        if (kinfo->flash_class == FC_PFLASH) {
                int result;
-               uint32_t w0 = 0, w1 = 0, w2 = 0;
                uint8_t ftfx_fstat;
 
                /* check if whole bank is blank */
-               w0 = (FTFx_CMD_BLOCKSTAT << 24) | bank->base;
-               w1 = 0; /* "normal margin" */
-
-               result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
+               result = kinetis_ftfx_command(bank, FTFx_CMD_BLOCKSTAT, bank->base, 0, 0, 0, 0,  0, 0, 0, 0, &ftfx_fstat);
 
                if (result != ERROR_OK)
                        return result;
@@ -780,10 +768,9 @@ static int kinetis_blank_check(struct flash_bank *bank)
                        /* the whole bank is not erased, check sector-by-sector */
                        int i;
                        for (i = 0; i < bank->num_sectors; i++) {
-                               w0 = (FTFx_CMD_SECTSTAT << 24) | (bank->base + bank->sectors[i].offset);
-                               w1 = (0x100 << 16) | 0; /* normal margin */
-
-                               result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat);
+                               /* normal margin */
+                               result = kinetis_ftfx_command(bank, FTFx_CMD_SECTSTAT, bank->base + bank->sectors[i].offset,
+                                               0, 0, 0, 1,  0, 0, 0, 0, &ftfx_fstat);
 
                                if (result == ERROR_OK) {
                                        bank->sectors[i].is_erased = !(ftfx_fstat & 0x01);