void cfi_command(flash_bank_t *bank, u8 cmd, u8 *cmd_buf)
{
int i;
-
+
/* clear whole buffer, to ensure bits that exceed the bus_width
* are set to zero
*/
{
target_t *target = bank->target;
u8 data[CFI_MAX_BUS_WIDTH];
-
+
target->type->read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 1, data);
-
+
if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
return data[0];
else
target_t *target = bank->target;
u8 data[CFI_MAX_BUS_WIDTH];
int i;
-
+
target->type->read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 1, data);
-
+
if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
{
for (i = 0; i < bank->bus_width / bank->chip_width; i++)
data[0] |= data[i];
-
+
return data[0];
}
else
u8 value = 0;
for (i = 0; i < bank->bus_width / bank->chip_width; i++)
value |= data[bank->bus_width - 1 - i];
-
+
return value;
}
}
{
target_t *target = bank->target;
u8 data[CFI_MAX_BUS_WIDTH * 2];
-
+
target->type->read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 2, data);
if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
{
target_t *target = bank->target;
u8 data[CFI_MAX_BUS_WIDTH * 4];
-
+
target->type->read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 4, data);
-
+
if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
return data[0] | data[bank->bus_width] << 8 | data[bank->bus_width * 2] << 16 | data[bank->bus_width * 3] << 24;
else
- return data[bank->bus_width - 1] | data[(2* bank->bus_width) - 1] << 8 |
+ return data[bank->bus_width - 1] | data[(2* bank->bus_width) - 1] << 8 |
data[(3 * bank->bus_width) - 1] << 16 | data[(4 * bank->bus_width) - 1] << 24;
}
{
target_t *target = bank->target;
u8 command[8];
-
+
if (target->state != TARGET_HALTED)
{
ERROR("BUG: attempted to clear status register while target wasn't halted");
exit(-1);
}
-
+
cfi_command(bank, 0x50, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
}
u8 cfi_intel_wait_status_busy(flash_bank_t *bank, int timeout)
{
u8 status;
-
+
while ((!((status = cfi_get_u8(bank, 0, 0x0)) & 0x80)) && (timeout-- > 0))
{
DEBUG("status: 0x%x", status);
status = status & 0xfe;
DEBUG("status: 0x%x", status);
-
+
if ((status & 0x80) != 0x80)
{
ERROR("timeout while waiting for WSM to become ready");
ERROR("Error in Block Erasure or Clear Lock-Bits");
if (status & 0x40)
ERROR("Block Erase Suspended");
-
+
cfi_intel_clear_status_register(bank);
}
-
+
return status;
}
int cfi_spansion_wait_status_busy(flash_bank_t *bank, int timeout)
{
u8 status, oldstatus;
-
+
oldstatus = cfi_get_u8(bank, 0, 0x0);
do {
DEBUG("status: 0x%x", status);
return(ERROR_OK);
}
-
+
oldstatus = status;
usleep(1000);
} while (timeout-- > 0);
-
+
ERROR("timeout, status: 0x%x", status);
return(ERROR_FLASH_BUSY);
cfi_intel_pri_ext_t *pri_ext = malloc(sizeof(cfi_intel_pri_ext_t));
target_t *target = bank->target;
u8 command[8];
-
+
cfi_info->pri_ext = pri_ext;
-
+
pri_ext->pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
pri_ext->pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
pri_ext->pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
-
+
if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
{
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
return ERROR_FLASH_BANK_INVALID;
}
-
+
pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
-
+
DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
-
+
pri_ext->feature_support = cfi_query_u32(bank, 0, cfi_info->pri_addr + 5);
pri_ext->suspend_cmd_support = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
pri_ext->blk_status_reg_mask = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xa);
-
+
DEBUG("feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
-
+
pri_ext->vcc_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xc);
pri_ext->vpp_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xd);
-
+
DEBUG("Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x",
(pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
(pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
-
+
pri_ext->num_protection_fields = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xe);
if (pri_ext->num_protection_fields != 1)
{
WARNING("expected one protection register field, but found %i", pri_ext->num_protection_fields);
}
-
+
pri_ext->prot_reg_addr = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xf);
pri_ext->fact_prot_reg_size = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0x11);
pri_ext->user_prot_reg_size = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0x12);
DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i", pri_ext->num_protection_fields, pri_ext->prot_reg_addr, 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
-
+
return ERROR_OK;
}
u8 command[8];
cfi_info->pri_ext = pri_ext;
-
+
pri_ext->pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
pri_ext->pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
pri_ext->pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
-
+
if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
{
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
return ERROR_FLASH_BANK_INVALID;
}
-
+
pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
-
+
DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
pri_ext->SiliconRevision = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode);
-
+
DEBUG("Vpp min: %2.2d.%1.1d, Vpp max: %2.2d.%1.1x",
(pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
(pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
-
+
DEBUG("WP# protection 0x%x", pri_ext->TopBottom);
-
+
/* default values for implementation specific workarounds */
pri_ext->_unlock1 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock1;
pri_ext->_unlock2 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock2;
pri_ext->_reversed_geometry = 0;
-
+
return ERROR_OK;
}
cfi_spansion_pri_ext_t *pri_ext = malloc(sizeof(cfi_spansion_pri_ext_t));
target_t *target = bank->target;
u8 command[8];
-
+
/* ATMEL devices use the same CFI primary command set (0x2) as AMD/Spansion,
* but a different primary extended query table.
* We read the atmel table, and prepare a valid AMD/Spansion query table.
*/
-
+
memset(pri_ext, 0, sizeof(cfi_spansion_pri_ext_t));
-
+
cfi_info->pri_ext = pri_ext;
-
+
atmel_pri_ext.pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
atmel_pri_ext.pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
atmel_pri_ext.pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
-
+
if ((atmel_pri_ext.pri[0] != 'P') || (atmel_pri_ext.pri[1] != 'R') || (atmel_pri_ext.pri[2] != 'I'))
{
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
return ERROR_FLASH_BANK_INVALID;
}
-
+
pri_ext->pri[0] = atmel_pri_ext.pri[0];
pri_ext->pri[1] = atmel_pri_ext.pri[1];
pri_ext->pri[2] = atmel_pri_ext.pri[2];
-
+
atmel_pri_ext.major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
atmel_pri_ext.minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
-
+
DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext.pri[0], atmel_pri_ext.pri[1], atmel_pri_ext.pri[2], atmel_pri_ext.major_version, atmel_pri_ext.minor_version);
-
+
pri_ext->major_version = atmel_pri_ext.major_version;
pri_ext->minor_version = atmel_pri_ext.minor_version;
-
+
atmel_pri_ext.features = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
atmel_pri_ext.bottom_boot = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6);
atmel_pri_ext.burst_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7);
DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
atmel_pri_ext.features, atmel_pri_ext.bottom_boot, atmel_pri_ext.burst_mode, atmel_pri_ext.page_mode);
-
+
if (atmel_pri_ext.features & 0x02)
pri_ext->EraseSuspend = 2;
pri_ext->TopBottom = 2;
else
pri_ext->TopBottom = 3;
-
+
return ERROR_OK;
}
int cfi_read_0002_pri_ext(flash_bank_t *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
-
+
if (cfi_info->manufacturer == CFI_MFR_ATMEL)
{
return cfi_read_atmel_pri_ext(bank);
int printed;
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
-
+
printed = snprintf(buf, buf_size, "\nSpansion primary algorithm extend information:\n");
buf += printed;
buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0],
- pri_ext->pri[1], pri_ext->pri[2],
+
+ printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0],
+ pri_ext->pri[1], pri_ext->pri[2],
pri_ext->major_version, pri_ext->minor_version);
buf += printed;
buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
+
+ printed = snprintf(buf, buf_size, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
(pri_ext->SiliconRevision) >> 2,
(pri_ext->SiliconRevision) & 0x03);
buf += printed;
buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
+
+ printed = snprintf(buf, buf_size, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
pri_ext->EraseSuspend,
pri_ext->BlkProt);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "VppMin: %2.2d.%1.1x, VppMax: %2.2d.%1.1x\n",
(pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
(pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
int printed;
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
-
+
printed = snprintf(buf, buf_size, "\nintel primary algorithm extend information:\n");
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x\n",
(pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
(pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i\n", pri_ext->num_protection_fields, pri_ext->prot_reg_addr, 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
-
+
return ERROR_OK;
}
int cfi_register_commands(struct command_context_s *cmd_ctx)
{
/*command_t *cfi_cmd = */register_command(cmd_ctx, NULL, "cfi", NULL, COMMAND_ANY, NULL);
- /*
+ /*
register_command(cmd_ctx, cfi_cmd, "part_id", cfi_handle_part_id_command, COMMAND_EXEC,
"print part id of cfi flash bank <num>");
*/
{
cfi_flash_bank_t *cfi_info;
int i;
-
+
if (argc < 6)
{
WARNING("incomplete flash_bank cfi configuration");
return ERROR_FLASH_BANK_INVALID;
}
-
+
if ((strtoul(args[4], NULL, 0) > CFI_MAX_CHIP_WIDTH)
|| (strtoul(args[3], NULL, 0) > CFI_MAX_BUS_WIDTH))
{
ERROR("chip and bus width have to specified in byte");
return ERROR_FLASH_BANK_INVALID;
}
-
+
cfi_info = malloc(sizeof(cfi_flash_bank_t));
bank->driver_priv = cfi_info;
-
+
cfi_info->x16_as_x8 = 0;
cfi_info->jedec_probe = 0;
cfi_info->not_cfi = 0;
-
+
for (i = 6; i < argc; i++)
{
if (strcmp(args[i], "x16_as_x8") == 0)
cfi_info->jedec_probe = 1;
}
}
-
+
cfi_info->write_algorithm = NULL;
/* bank wasn't probed yet */
cfi_info->qry[0] = -1;
-
+
return ERROR_OK;
}
target_t *target = bank->target;
u8 command[8];
int i;
-
+
cfi_intel_clear_status_register(bank);
for (i = first; i <= last; i++)
{
cfi_command(bank, 0x20, command);
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0xd0, command);
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
-
+
if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->block_erase_timeout_typ)) == 0x80)
bank->sectors[i].is_erased = 1;
else
{
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
-
+
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
return ERROR_OK;
}
-
+
int cfi_spansion_erase(struct flash_bank_s *bank, int first, int last)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
target_t *target = bank->target;
u8 command[8];
int i;
-
+
for (i = first; i <= last; i++)
{
cfi_command(bank, 0xaa, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0x55, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0x80, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
cfi_command(bank, 0xaa, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0x55, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0x30, command);
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
{
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
-
+
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
return ERROR_OK;
}
-
+
int cfi_erase(struct flash_bank_s *bank, int first, int last)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
-
+
if (bank->target->state != TARGET_HALTED)
{
return ERROR_TARGET_NOT_HALTED;
}
-
+
if ((first < 0) || (last < first) || (last >= bank->num_sectors))
{
return ERROR_FLASH_SECTOR_INVALID;
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
-
+
switch(cfi_info->pri_id)
{
case 1:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_OK;
}
u8 command[8];
int retry = 0;
int i;
-
+
/* if the device supports neither legacy lock/unlock (bit 3) nor
* instant individual block locking (bit 5).
*/
if (!(pri_ext->feature_support & 0x28))
return ERROR_FLASH_OPERATION_FAILED;
-
+
cfi_intel_clear_status_register(bank);
for (i = first; i <= last; i++)
cfi_command(bank, 0x90, command);
target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
block_status = cfi_get_u8(bank, i, 0x2);
-
+
if ((block_status & 0x1) != set)
{
ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set, block_status);
cfi_command(bank, 0x70, command);
target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
cfi_intel_wait_status_busy(bank, 10);
-
+
if (retry > 10)
return ERROR_FLASH_OPERATION_FAILED;
else
{
i--;
- retry++;
+ retry++;
}
- }
+ }
}
}
-
+
/* if the device doesn't support individual block lock bits set/clear,
* all blocks have been unlocked in parallel, so we set those that should be protected
*/
cfi_command(bank, 0x01, command);
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
}
-
+
cfi_intel_wait_status_busy(bank, 100);
}
}
-
+
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
return ERROR_OK;
}
int cfi_protect(struct flash_bank_s *bank, int set, int first, int last)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
-
+
if (bank->target->state != TARGET_HALTED)
{
return ERROR_TARGET_NOT_HALTED;
}
-
+
if ((first < 0) || (last < first) || (last >= bank->num_sectors))
{
return ERROR_FLASH_SECTOR_INVALID;
}
-
+
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
-
+
switch(cfi_info->pri_id)
{
case 1:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_OK;
}
target_t *target = bank->target;
int i;
-
+
if (target->endianness == TARGET_LITTLE_ENDIAN)
{
/* shift bytes */
* r5: busy test pattern
* r6: error test pattern
*/
-
+
static const u32 word_32_code[] = {
0xe4904004, /* loop: ldr r4, [r0], #4 */
0xe5813000, /* str r3, [r1] */
0xeafffff2, /* b loop */
0xeafffffe, /* done: b -2 */
};
-
+
static const u32 word_16_code[] = {
0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
0xe1c130b0, /* strh r3, [r1] */
0xeafffff2, /* b loop */
0xeafffffe, /* done: b -2 */
};
-
+
static const u32 word_8_code[] = {
0xe4d04001, /* loop: ldrb r4, [r0], #1 */
0xe5c13000, /* strb r3, [r1] */
0xeafffff2, /* b loop */
0xeafffffe, /* done: b -2 */
};
-
+
cfi_intel_clear_status_register(bank);
-
+
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
+
/* flash write code */
if (!cfi_info->write_algorithm)
{
u8 write_code_buf[14 * 4];
int i;
-
+
if (target_alloc_working_area(target, 4 * 14, &cfi_info->write_algorithm) != ERROR_OK)
{
WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
-
+
/* write algorithm code to working area */
if (bank->bus_width == 1)
{
{
for (i = 0; i < 14; i++)
target_buffer_set_u32(target, write_code_buf + (i*4), word_16_code[i]);
- }
+ }
else if (bank->bus_width == 4)
{
for (i = 0; i < 14; i++)
target_write_buffer(target, cfi_info->write_algorithm->address, 14 * 4, write_code_buf);
}
-
+
while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
{
buffer_size /= 2;
/* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
if (cfi_info->write_algorithm)
target_free_working_area(target, cfi_info->write_algorithm);
-
+
WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
cfi_command(bank, 0x40, write_command_buf);
cfi_command(bank, 0x80, busy_pattern_buf);
cfi_command(bank, 0x7e, error_pattern_buf);
-
+
if (bank->bus_width == 1)
{
write_command_val = write_command_buf[0];
busy_pattern_val = target_buffer_get_u32(target, busy_pattern_buf);
error_pattern_val = target_buffer_get_u32(target, error_pattern_buf);
}
-
+
while (count > 0)
{
u32 thisrun_count = (count > buffer_size) ? buffer_size : count;
-
+
target_write_buffer(target, source->address, thisrun_count, buffer);
-
+
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
buf_set_u32(reg_params[3].value, 0, 32, write_command_val);
buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
-
+
if ((retval = target->type->run_algorithm(target, 0, NULL, 7, reg_params, cfi_info->write_algorithm->address, cfi_info->write_algorithm->address + (13 * 4), 10000, &armv4_5_info)) != ERROR_OK)
{
cfi_intel_clear_status_register(bank);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
if (buf_get_u32(reg_params[4].value, 0, 32) & error_pattern_val)
{
/* read status register (outputs debug inforation) */
cfi_intel_clear_status_register(bank);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
buffer += thisrun_count;
address += thisrun_count;
count -= thisrun_count;
}
-
+
target_free_working_area(target, source);
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[4]);
destroy_reg_param(®_params[5]);
destroy_reg_param(®_params[6]);
-
+
return ERROR_OK;
}
/* 00008154 <sp_32_done>: */
0xeafffffe /* b 8154 <sp_32_done> */
};
-
+
u32 word_16_code[] = {
/* 00008158 <sp_16_code>: */
0xe0d050b2, /* ldrh r5, [r0], #2 */
0xeaffffe8, /* b 8158 <sp_16_code> */
/* */
/* 000081ac <sp_16_done>: */
- 0xeafffffe /* b 81ac <sp_16_done> */
+ 0xeafffffe /* b 81ac <sp_16_done> */
};
-
+
u32 word_8_code[] = {
/* 000081b0 <sp_16_code_end>: */
0xe4d05001, /* ldrb r5, [r0], #1 */
/* 00008204 <sp_8_done>: */
0xeafffffe /* b 8204 <sp_8_done> */
};
-
+
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
+
/* flash write code */
if (!cfi_info->write_algorithm)
{
if (bank->bus_width == 1)
{
code_p = malloc(24 * 4);
-
+
for (i = 0; i < 24; i++)
target_buffer_set_u32(target, code_p + (i*4), word_8_code[i]);
}
else if (bank->bus_width == 2)
{
code_p = malloc(24 * 4);
-
+
for (i = 0; i < 24; i++)
target_buffer_set_u32(target, code_p + (i*4), word_16_code[i]);
- }
+ }
else if (bank->bus_width == 4)
{
code_p = malloc(24 * 4);
-
+
for (i = 0; i < 24; i++)
target_buffer_set_u32(target, code_p + (i*4), word_32_code[i]);
}
{
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
/* allocate working area */
if (target_alloc_working_area(target, 24 * 4,
&cfi_info->write_algorithm) != ERROR_OK)
WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
-
+
/* write algorithm code to working area */
target_write_buffer(target, cfi_info->write_algorithm->address, 24 * 4, code_p);
-
+
free(code_p);
}
-
+
while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
{
buffer_size /= 2;
/* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
if (cfi_info->write_algorithm)
target_free_working_area(target, cfi_info->write_algorithm);
-
+
WARNING("not enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
while (count > 0)
{
u32 thisrun_count = (count > buffer_size) ? buffer_size : count;
-
+
target_write_buffer(target, source->address, thisrun_count, buffer);
-
+
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
buf_set_u32(reg_params[7].value, 0, 32, 0xaa);
buf_set_u32(reg_params[8].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock2));
buf_set_u32(reg_params[9].value, 0, 32, 0x55);
-
- retval = target->type->run_algorithm(target, 0, NULL, 10, reg_params,
- cfi_info->write_algorithm->address,
- cfi_info->write_algorithm->address + ((24 * 4) - 4),
+
+ retval = target->type->run_algorithm(target, 0, NULL, 10, reg_params,
+ cfi_info->write_algorithm->address,
+ cfi_info->write_algorithm->address + ((24 * 4) - 4),
10000, &armv4_5_info);
status = buf_get_u32(reg_params[5].value, 0, 32);
-
+
if ((retval != ERROR_OK) || status != 0x80)
{
DEBUG("status: 0x%x", status);
exit_code = ERROR_FLASH_OPERATION_FAILED;
break;
}
-
+
buffer += thisrun_count;
address += thisrun_count;
count -= thisrun_count;
}
-
+
target_free_working_area(target, source);
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
cfi_flash_bank_t *cfi_info = bank->driver_priv;
target_t *target = bank->target;
u8 command[8];
-
+
cfi_intel_clear_status_register(bank);
cfi_command(bank, 0x40, command);
target->type->write_memory(target, address, bank->bus_width, 1, command);
-
+
target->type->write_memory(target, address, bank->bus_width, 1, word);
-
+
if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != 0x80)
{
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
return ERROR_OK;
}
cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
target_t *target = bank->target;
u8 command[8];
-
+
cfi_command(bank, 0xaa, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0x55, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0xa0, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
target->type->write_memory(target, address, bank->bus_width, 1, word);
-
+
if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != ERROR_OK)
{
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
return ERROR_OK;
}
int cfi_write_word(struct flash_bank_s *bank, u8 *word, u32 address)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
-
+
switch(cfi_info->pri_id)
{
case 1:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_FLASH_OPERATION_FAILED;
}
u8 current_word[CFI_MAX_BUS_WIDTH * 4]; /* word (bus_width size) currently being programmed */
int i;
int retval;
-
+
if (bank->target->state != TARGET_HALTED)
{
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (offset + count > bank->size)
return ERROR_FLASH_DST_OUT_OF_BANK;
-
+
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
target->type->read_memory(target, copy_p, 1, 1, &byte);
cfi_add_byte(bank, current_word, byte);
}
-
+
retval = cfi_write_word(bank, current_word, write_p);
if (retval != ERROR_OK)
return retval;
write_p = copy_p;
}
-
+
/* handle blocks of bus_size aligned bytes */
switch(cfi_info->pri_id)
{
{
for (i = 0; i < bank->bus_width; i++)
current_word[i] = 0;
-
+
for (i = 0; i < bank->bus_width; i++)
{
cfi_add_byte(bank, current_word, *buffer++);
}
-
+
retval = cfi_write_word(bank, current_word, write_p);
if (retval != ERROR_OK)
return retval;
else
return retval;
}
-
+
/* handle unaligned tail bytes */
if (count > 0)
{
copy_p = write_p;
for (i = 0; i < bank->bus_width; i++)
current_word[i] = 0;
-
+
for (i = 0; (i < bank->bus_width) && (count > 0); ++i, ++copy_p)
{
cfi_add_byte(bank, current_word, *buffer++);
if (retval != ERROR_OK)
return retval;
}
-
+
/* return to read array mode */
cfi_command(bank, 0xf0, current_word);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word);
cfi_command(bank, 0xff, current_word);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word);
-
+
return ERROR_OK;
}
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
-
+
pri_ext->_reversed_geometry = 1;
}
int i;
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
-
+
if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3))
{
DEBUG("swapping reversed erase region information on cmdset 0002 device");
-
+
for (i = 0; i < cfi_info->num_erase_regions / 2; i++)
{
int j = (cfi_info->num_erase_regions - 1) - i;
u32 swap;
-
+
swap = cfi_info->erase_region_info[i];
cfi_info->erase_region_info[i] = cfi_info->erase_region_info[j];
cfi_info->erase_region_info[j] = swap;
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
cfi_unlock_addresses_t *unlock_addresses = param;
-
+
pri_ext->_unlock1 = unlock_addresses->unlock1;
pri_ext->_unlock2 = unlock_addresses->unlock2;
}
u32 offset = 0;
u32 unlock1 = 0x555;
u32 unlock2 = 0x2aa;
-
+
/* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
* while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
*/
unlock1 = 0x5555;
unlock2 = 0x2aaa;
}
-
+
/* switch to read identifier codes mode ("AUTOSELECT") */
cfi_command(bank, 0xaa, command);
target->type->write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command);
target_read_u16(target, bank->base + 0x0, &cfi_info->manufacturer);
target_read_u16(target, bank->base + 0x2, &cfi_info->device_id);
}
-
+
/* switch back to read array mode */
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command);
* according to JEDEC Standard No. 68.01,
* a single bus sequence with address = 0x55, data = 0x98 should put
* the device into CFI query mode.
- *
+ *
* SST flashes clearly violate this, and we will consider them incompatbile for now
*/
cfi_command(bank, 0x98, command);
target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
-
+
cfi_info->qry[0] = cfi_query_u8(bank, 0, 0x10);
cfi_info->qry[1] = cfi_query_u8(bank, 0, 0x11);
cfi_info->qry[2] = cfi_query_u8(bank, 0, 0x12);
-
+
DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
-
+
if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
{
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
return ERROR_FLASH_BANK_INVALID;
}
-
+
cfi_info->pri_id = cfi_query_u16(bank, 0, 0x13);
cfi_info->pri_addr = cfi_query_u16(bank, 0, 0x15);
cfi_info->alt_id = cfi_query_u16(bank, 0, 0x17);
cfi_info->alt_addr = cfi_query_u16(bank, 0, 0x19);
-
+
DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
-
+
cfi_info->vcc_min = cfi_query_u8(bank, 0, 0x1b);
cfi_info->vcc_max = cfi_query_u8(bank, 0, 0x1c);
cfi_info->vpp_min = cfi_query_u8(bank, 0, 0x1d);
cfi_info->buf_write_timeout_max = cfi_query_u8(bank, 0, 0x24);
cfi_info->block_erase_timeout_max = cfi_query_u8(bank, 0, 0x25);
cfi_info->chip_erase_timeout_max = cfi_query_u8(bank, 0, 0x26);
-
+
DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
(cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
(cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
(1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
(1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
(1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
-
+
cfi_info->dev_size = cfi_query_u8(bank, 0, 0x27);
cfi_info->interface_desc = cfi_query_u16(bank, 0, 0x28);
cfi_info->max_buf_write_size = cfi_query_u16(bank, 0, 0x2a);
cfi_info->num_erase_regions = cfi_query_u8(bank, 0, 0x2c);
-
+
DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", 1 << cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
-
+
if (((1 << cfi_info->dev_size) * bank->bus_width / bank->chip_width) != bank->size)
{
WARNING("configuration specifies 0x%x size, but a 0x%x size flash was found", bank->size, 1 << cfi_info->dev_size);
}
-
+
if (cfi_info->num_erase_regions)
{
cfi_info->erase_region_info = malloc(4 * cfi_info->num_erase_regions);
{
cfi_info->erase_region_info = NULL;
}
-
+
/* We need to read the primary algorithm extended query table before calculating
* the sector layout to be able to apply fixups
- */
+ */
switch(cfi_info->pri_id)
{
/* Intel command set (standard and extended) */
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
/* return to read array mode
* we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
*/
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
}
-
+
/* apply fixups depending on the primary command set */
switch(cfi_info->pri_id)
{
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
if (cfi_info->num_erase_regions == 0)
{
- /* a device might have only one erase block, spanning the whole device */
+ /* a device might have only one erase block, spanning the whole device */
bank->num_sectors = 1;
bank->sectors = malloc(sizeof(flash_sector_t));
-
+
bank->sectors[sector].offset = 0x0;
bank->sectors[sector].size = bank->size;
bank->sectors[sector].is_erased = -1;
{
num_sectors += (cfi_info->erase_region_info[i] & 0xffff) + 1;
}
-
+
bank->num_sectors = num_sectors;
bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
-
+
for (i = 0; i < cfi_info->num_erase_regions; i++)
{
int j;
}
}
}
-
+
return ERROR_OK;
}
target_t *target = bank->target;
int i;
int retval;
-
+
if (!cfi_info->erase_check_algorithm)
{
u32 erase_check_code[] =
0x1afffffb, /* b -4 */
0xeafffffe /* b 0 */
};
-
+
/* make sure we have a working area */
if (target_alloc_working_area(target, 20, &cfi_info->erase_check_algorithm) != ERROR_OK)
{
else
{
u8 erase_check_code_buf[5 * 4];
-
+
for (i = 0; i < 5; i++)
target_buffer_set_u32(target, erase_check_code_buf + (i*4), erase_check_code[i]);
-
+
/* write algorithm code to working area */
target->type->write_memory(target, cfi_info->erase_check_algorithm->address, 4, 5, erase_check_code_buf);
}
}
-
+
if (!cfi_info->erase_check_algorithm)
{
u32 *buffer = malloc(4096);
-
+
for (i = 0; i < bank->num_sectors; i++)
{
u32 address = bank->base + bank->sectors[i].offset;
u32 size = bank->sectors[i].size;
u32 check = 0xffffffffU;
int erased = 1;
-
+
while (size > 0)
{
u32 thisrun_size = (size > 4096) ? 4096 : size;
int j;
-
+
target->type->read_memory(target, address, 4, thisrun_size / 4, (u8*)buffer);
-
+
for (j = 0; j < thisrun_size / 4; j++)
check &= buffer[j];
-
+
if (check != 0xffffffff)
{
erased = 0;
break;
}
-
+
size -= thisrun_size;
address += thisrun_size;
}
-
+
bank->sectors[i].is_erased = erased;
}
-
+
free(buffer);
}
else
- {
+ {
for (i = 0; i < bank->num_sectors; i++)
{
u32 address = bank->base + bank->sectors[i].offset;
reg_param_t reg_params[3];
armv4_5_algorithm_t armv4_5_info;
-
+
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
+
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
-
+
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, size);
-
+
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0xff);
-
+
if ((retval = target->type->run_algorithm(target, 0, NULL, 3, reg_params, cfi_info->erase_check_algorithm->address, cfi_info->erase_check_algorithm->address + 0x10, 10000, &armv4_5_info)) != ERROR_OK)
return ERROR_FLASH_OPERATION_FAILED;
-
+
if (buf_get_u32(reg_params[2].value, 0, 32) == 0xff)
bank->sectors[i].is_erased = 1;
else
bank->sectors[i].is_erased = 0;
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
}
}
-
+
return ERROR_OK;
}
target_t *target = bank->target;
u8 command[CFI_MAX_BUS_WIDTH];
int i;
-
+
/* check if block lock bits are supported on this device */
if (!(pri_ext->blk_status_reg_mask & 0x1))
return ERROR_FLASH_OPERATION_FAILED;
for (i = 0; i < bank->num_sectors; i++)
{
u8 block_status = cfi_get_u8(bank, i, 0x2);
-
+
if (block_status & 1)
bank->sectors[i].is_protected = 1;
else
target_t *target = bank->target;
u8 command[8];
int i;
-
+
cfi_command(bank, 0xaa, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0x55, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0x90, command);
target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
for (i = 0; i < bank->num_sectors; i++)
{
u8 block_status = cfi_get_u8(bank, i, 0x2);
-
+
if (block_status & 1)
bank->sectors[i].is_protected = 1;
else
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
-
+
switch(cfi_info->pri_id)
{
case 1:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_OK;
}
{
int printed;
cfi_flash_bank_t *cfi_info = bank->driver_priv;
-
+
if (cfi_info->qry[0] == -1)
{
printed = snprintf(buf, buf_size, "\ncfi flash bank not probed yet\n");
return ERROR_OK;
}
-
+
printed = snprintf(buf, buf_size, "\ncfi information:\n");
buf += printed;
buf_size -= printed;
cfi_info->manufacturer, cfi_info->device_id);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x\n", (cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
(cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
(cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
(cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u\n", 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u\n", (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
(1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
(1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
(1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "size: 0x%x, interface desc: %i, max buffer write size: %x\n", 1 << cfi_info->dev_size, cfi_info->interface_desc, cfi_info->max_buf_write_size);
buf += printed;
buf_size -= printed;
-
+
switch(cfi_info->pri_id)
{
case 1:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_OK;
}
Code Review / openocd.git / commitdiff