Clean up some type casts and misuses of format specifiers in preparation
for target address type changes.
Change-Id: Idf08286f41bca636e35a09e8ddc1d71af3d6e151
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3717
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
*/
int target_write_buffer(struct target *target, uint32_t address, uint32_t size, const uint8_t *buffer)
{
*/
int target_write_buffer(struct target *target, uint32_t address, uint32_t size, const uint8_t *buffer)
{
- LOG_DEBUG("writing buffer of %i byte at 0x%8.8x",
- (int)size, (unsigned)address);
+ LOG_DEBUG("writing buffer of %" PRIi32 " byte at 0x%8.8" PRIx32,
+ size, address);
if (!target_was_examined(target)) {
LOG_ERROR("Target not examined yet");
if (!target_was_examined(target)) {
LOG_ERROR("Target not examined yet");
if ((address + size - 1) < address) {
/* GDB can request this when e.g. PC is 0xfffffffc */
if ((address + size - 1) < address) {
/* GDB can request this when e.g. PC is 0xfffffffc */
- LOG_ERROR("address + size wrapped (0x%08x, 0x%08x)",
- (unsigned)address,
- (unsigned)size);
+ LOG_ERROR("address + size wrapped (0x%08" PRIx32 ", 0x%08" PRIx32 ")",
+ address,
+ size);
*/
int target_read_buffer(struct target *target, uint32_t address, uint32_t size, uint8_t *buffer)
{
*/
int target_read_buffer(struct target *target, uint32_t address, uint32_t size, uint8_t *buffer)
{
- LOG_DEBUG("reading buffer of %i byte at 0x%8.8x",
- (int)size, (unsigned)address);
+ LOG_DEBUG("reading buffer of %" PRIi32 " byte at 0x%8.8" PRIx32,
+ size, address);
if (!target_was_examined(target)) {
LOG_ERROR("Target not examined yet");
if (!target_was_examined(target)) {
LOG_ERROR("Target not examined yet");
if (retval != ERROR_OK) {
buffer = malloc(size);
if (buffer == NULL) {
if (retval != ERROR_OK) {
buffer = malloc(size);
if (buffer == NULL) {
- LOG_ERROR("error allocating buffer for section (%d bytes)", (int)size);
+ LOG_ERROR("error allocating buffer for section (%" PRId32 " bytes)", size);
return ERROR_COMMAND_SYNTAX_ERROR;
}
retval = target_read_buffer(target, address, size, buffer);
return ERROR_COMMAND_SYNTAX_ERROR;
}
retval = target_read_buffer(target, address, size, buffer);
if (retval == ERROR_OK) {
*value = target_buffer_get_u16(target, value_buf);
if (retval == ERROR_OK) {
*value = target_buffer_get_u16(target, value_buf);
- LOG_DEBUG("address: 0x%8.8" PRIx32 ", value: 0x%4.4x",
+ LOG_DEBUG("address: 0x%8.8" PRIx32 ", value: 0x%4.4" PRIx16,
address,
*value);
} else {
address,
*value);
} else {
int retval = target_read_memory(target, address, 1, 1, value);
if (retval == ERROR_OK) {
int retval = target_read_memory(target, address, 1, 1, value);
if (retval == ERROR_OK) {
- LOG_DEBUG("address: 0x%8.8" PRIx32 ", value: 0x%2.2x",
+ LOG_DEBUG("address: 0x%8.8" PRIx32 ", value: 0x%2.2" PRIx8,
address,
*value);
} else {
address,
*value);
} else {
- LOG_DEBUG("address: 0x%8.8" PRIx32 ", value: 0x%8.8x",
+ LOG_DEBUG("address: 0x%8.8" PRIx32 ", value: 0x%8.8" PRIx16,
- LOG_DEBUG("address: 0x%8.8" PRIx32 ", value: 0x%2.2x",
+ LOG_DEBUG("address: 0x%8.8" PRIx32 ", value: 0x%2.2" PRIx8,
address, value);
retval = target_write_memory(target, address, 1, 1, &value);
address, value);
retval = target_write_memory(target, address, 1, 1, &value);
retval = target_read_memory(target, addr, width, count, buffer);
if (retval != ERROR_OK) {
/* BOO !*/
retval = target_read_memory(target, addr, width, count, buffer);
if (retval != ERROR_OK) {
/* BOO !*/
- LOG_ERROR("mem2array: Read @ 0x%08x, w=%d, cnt=%d, failed",
- (unsigned int)addr,
- (int)width,
- (int)count);
+ LOG_ERROR("mem2array: Read @ 0x%08" PRIx32 ", w=%" PRId32 ", cnt=%" PRId32 ", failed",
+ addr,
+ width,
+ count);
Jim_SetResult(interp, Jim_NewEmptyStringObj(interp));
Jim_AppendStrings(interp, Jim_GetResult(interp), "mem2array: cannot read memory", NULL);
e = JIM_ERR;
Jim_SetResult(interp, Jim_NewEmptyStringObj(interp));
Jim_AppendStrings(interp, Jim_GetResult(interp), "mem2array: cannot read memory", NULL);
e = JIM_ERR;
} else {
char buf[100];
Jim_SetResult(interp, Jim_NewEmptyStringObj(interp));
} else {
char buf[100];
Jim_SetResult(interp, Jim_NewEmptyStringObj(interp));
- sprintf(buf, "array2mem address: 0x%08x is not aligned for %d byte reads",
- (unsigned int)addr,
- (int)width);
+ sprintf(buf, "array2mem address: 0x%08" PRIx32 " is not aligned for %" PRId32 " byte reads",
+ addr,
+ width);
Jim_AppendStrings(interp, Jim_GetResult(interp), buf, NULL);
return JIM_ERR;
}
Jim_AppendStrings(interp, Jim_GetResult(interp), buf, NULL);
return JIM_ERR;
}
retval = target_write_memory(target, addr, width, count, buffer);
if (retval != ERROR_OK) {
/* BOO !*/
retval = target_write_memory(target, addr, width, count, buffer);
if (retval != ERROR_OK) {
/* BOO !*/
- LOG_ERROR("array2mem: Write @ 0x%08x, w=%d, cnt=%d, failed",
- (unsigned int)addr,
- (int)width,
- (int)count);
+ LOG_ERROR("array2mem: Write @ 0x%08" PRIx32 ", w=%" PRId32 ", cnt=%" PRId32 ", failed",
+ addr,
+ width,
+ count);
Jim_SetResult(interp, Jim_NewEmptyStringObj(interp));
Jim_AppendStrings(interp, Jim_GetResult(interp), "array2mem: cannot read memory", NULL);
e = JIM_ERR;
Jim_SetResult(interp, Jim_NewEmptyStringObj(interp));
Jim_AppendStrings(interp, Jim_GetResult(interp), "array2mem: cannot read memory", NULL);
e = JIM_ERR;
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)