ftdi/tumpa.cfg: enable proper output buffer control, add another USB ID 89/1789/2
authorPaul Fertser <fercerpav@gmail.com>
Thu, 31 Oct 2013 11:16:15 +0000 (15:16 +0400)
committerSpencer Oliver <spen@spen-soft.co.uk>
Thu, 31 Oct 2013 20:40:28 +0000 (20:40 +0000)
commitc044c601213ee800cffb21e1f53a89285b3346c9
tree39da9ef557453c03c78c1299b43a3be6099a0e17
parentf132fcf636361009b4125827351ef01556d49b31
ftdi/tumpa.cfg: enable proper output buffer control, add another USB ID

The schematics used for writing the config file were incorrect, real
hardware needs ACBUS3 _low_ as it's connected directly to the output
buffer's !OE pin.

Also apparently sometimes TUMPA comes with default FTDI IDs.

Real-life tested (including TRST and SRST) with a custom stm32f103
board, thanks to Mike Wang for the adapter sample.

Change-Id: Iab566e6d14f8392030f6ff2c8d976e1b57cf5ce6
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1789
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
tcl/interface/ftdi/tumpa.cfg