X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstr750.cfg;h=335d5ada9c671aaea3a6ce6f165f19f92e0288dc;hp=e9167279decb8aaf0d2fb8bdfc5c502e79f29bf7;hb=HEAD;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3

diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg
index e9167279de..5af7b74a70 100644
--- a/tcl/target/str750.cfg
+++ b/tcl/target/str750.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #STR750 CPU
 
 if { [info exists CHIPNAME] } {
@@ -19,7 +21,7 @@ if { [info exists CPUTAPID] } {
 }
 
 # jtag speed
-adapter_khz 10
+adapter speed 10
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
@@ -29,15 +31,15 @@ reset_config trst_and_srst srst_pulls_trst
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 #jtag nTRST and nSRST delay
-adapter_nsrst_delay 500
+adapter srst delay 500
 jtag_ntrst_delay 500
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
 
-$_TARGETNAME configure -event reset-start { adapter_khz 10 }
+$_TARGETNAME configure -event reset-start { adapter speed 10 }
 $_TARGETNAME configure -event reset-init {
-	adapter_khz 3000
+	adapter speed 3000
 
 	init_smi
 # Because the hardware cannot be interrogated for the protection state