X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f7x.cfg;h=e06a34594f45040ea4e72ffb85dbffc4852e90d1;hp=562de30f6a1eb23e4f968351f733e93c591ea7a9;hb=bdef93520a4721e1ed4ac4675476772fab064896;hpb=723fc07ddc925d101e8d2de1fa1d83e7843e246f;ds=sidebyside

diff --git a/tcl/target/stm32f7x.cfg b/tcl/target/stm32f7x.cfg
index 562de30f6a..e06a34594f 100755
--- a/tcl/target/stm32f7x.cfg
+++ b/tcl/target/stm32f7x.cfg
@@ -145,3 +145,11 @@ $_TARGETNAME configure -event reset-start {
 	# Reduce speed since CPU speed will slow down to 16MHz with the reset
 	adapter_khz 2000
 }
+
+# Set CSW[27], which according to ARM ADI v5 appendix E1.4 maps to AHB signal
+# HPROT[3], which according to AMBA AHB/ASB/APB specification chapter 3.7.3
+# makes the data access cacheable. This allows reading and writing data in the
+# CPU cache from the debugger, which is far more useful than going straight to
+# RAM when operating on typical variables, and is generally no worse when
+# operating on special memory locations.
+$_CHIPNAME.dap apcsw 0x08000000 0x08000000