X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f7x.cfg;fp=tcl%2Ftarget%2Fstm32f7x.cfg;h=3c7679de253b5d22c17445edfcf579870d6a4dc9;hp=6ad4b65f8f568dd5b07063b9842000a67456d54a;hb=e44539d66c8929679321704768125df9ba7d5f67;hpb=475f42051e13d64bc4d1960306ad1d2ea3c7962a

diff --git a/tcl/target/stm32f7x.cfg b/tcl/target/stm32f7x.cfg
index 6ad4b65f8f..3c7679de25 100644
--- a/tcl/target/stm32f7x.cfg
+++ b/tcl/target/stm32f7x.cfg
@@ -12,7 +12,7 @@ if { [info exists CHIPNAME] } {
    set _CHIPNAME stm32f7x
 }
 
-   set _ENDIAN little
+set _ENDIAN little
 
 # Work-area is a space in RAM used for flash programming
 # By default use 128kB
@@ -64,6 +64,12 @@ flash bank $_CHIPNAME.otp stm32f2x 0x1ff0f000 0 0 0 $_TARGETNAME
 #     the Flash via ITCM alias as virtual
 flash bank $_CHIPNAME.itcm-flash.alias virtual 0x00200000 0 0 0 $_TARGETNAME $_FLASHNAME
 
+if { [info exists QUADSPI] && $QUADSPI } {
+   set a [llength [flash list]]
+   set _QSPINAME $_CHIPNAME.qspi
+   flash bank $_QSPINAME stmqspi 0x90000000 0 0 0 $_TARGETNAME 0xA0001000
+}
+
 # adapter speed should be <= F_CPU/6. F_CPU after reset is 16MHz, so use F_JTAG = 2MHz
 adapter speed 2000