X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f2x.cfg;h=43a944c103d10f646e757fdf8235eb82358fdd45;hp=cfd6274e68acc2128b39cf5bed5b699f41e57810;hb=b7d2cdc0d4fc319169c60362708a67e2ff626525;hpb=564a5eb5375aa8117ee4fe48899f07490da8ae8a

diff --git a/tcl/target/stm32f2x.cfg b/tcl/target/stm32f2x.cfg
index cfd6274e68..43a944c103 100644
--- a/tcl/target/stm32f2x.cfg
+++ b/tcl/target/stm32f2x.cfg
@@ -52,7 +52,7 @@ if { [info exists BSTAPID] } {
 jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
@@ -61,4 +61,4 @@ flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
 
 # if srst is not fitted use SYSRESETREQ to
 # perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq