X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f1x.cfg;h=12d33d52c5297ecdb05b3cb58590f65746069c3c;hp=7d3f42f3b9762a5d29f82b6fbf6cfc47df72e0c3;hb=refs%2Fchanges%2F56%2F1856%2F2;hpb=b7d2cdc0d4fc319169c60362708a67e2ff626525

diff --git a/tcl/target/stm32f1x.cfg b/tcl/target/stm32f1x.cfg
index 7d3f42f3b9..12d33d52c5 100644
--- a/tcl/target/stm32f1x.cfg
+++ b/tcl/target/stm32f1x.cfg
@@ -13,11 +13,11 @@ if { [info exists ENDIAN] } {
 }
 
 # Work-area is a space in RAM used for flash programming
-# By default use 16kB
+# By default use 4kB (as found on some STM32F100s)
 if { [info exists WORKAREASIZE] } {
    set _WORKAREASIZE $WORKAREASIZE
 } else {
-   set _WORKAREASIZE 0x4000
+   set _WORKAREASIZE 0x1000
 }
 
 # JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz