X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32_stlink.cfg;h=295292e3e50e401cfc8ec8ffdedb13bd32bb028e;hp=7dccd47302fb22e5caed13da2e052e2f48843d92;hb=f3b1405fddf0b32af27ad3894841f7d1702d8e5a;hpb=6c467da586a42c8b1332670f2d5f27ae360a153f

diff --git a/tcl/target/stm32_stlink.cfg b/tcl/target/stm32_stlink.cfg
index 7dccd47302..295292e3e5 100644
--- a/tcl/target/stm32_stlink.cfg
+++ b/tcl/target/stm32_stlink.cfg
@@ -1,60 +1 @@
-#
-# stm32 stlink pseudo target
-#
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME stm32f1x
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 16kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x4000
-}
-
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   # this is the SW-DP tap id not the jtag tap id
-   set _CPUTAPID 0x1ba01477
-}
-
-if { [info exists TRANSPORT] } {
-   set _TRANSPORT $TRANSPORT
-   if { $TRANSPORT == "hla_jtag" } {
-      if { [info exists CPUTAPID] == 0 } {
-         # jtag requires us to use the jtag tap id
-         set _CPUTAPID 0x3ba00477
-      }
-   }
-} else {
-   set _TRANSPORT hla_swd
-}
-
-# add deprecated transport name check
-if { $_TRANSPORT == "stlink_swd" } {
-	set _TRANSPORT "hla_swd"
-	echo "DEPRECATED! use 'hla_swd' transport not 'stlink_swd'"
-}
-
-if { $_TRANSPORT == "stlink_jtag" } {
-	set _TRANSPORT "hla_jtag"
-	echo "DEPRECATED! use 'hla_jtag' transport not 'stlink_jtag'"
-}
-# end deprecated checks
-
-#
-# possibles value are hla_swd or hla_jtag
-#
-transport select $_TRANSPORT
-
-hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+echo "WARNING: stm32_stlink.cfg is deprecated (and does nothing, you can safely remove it.)"