X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Flpc3131.cfg;h=27c1f67578ff5dc56138f85214915935c34c8afb;hp=5c6aa3ce869bccea7a5686f1405d1622b46bc521;hb=8002ed268d5936fbf024b09b60eecae00d058bc4;hpb=fc4cbc0f988c347be298518b32643fc2fc4e692d

diff --git a/tcl/target/lpc3131.cfg b/tcl/target/lpc3131.cfg
index 5c6aa3ce86..27c1f67578 100644
--- a/tcl/target/lpc3131.cfg
+++ b/tcl/target/lpc3131.cfg
@@ -3,19 +3,19 @@
 ######################################
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME lpc3131
+   set _CHIPNAME lpc3131
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
 # ARM926EJS core
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x07926f0f
@@ -24,7 +24,7 @@ if { [info exists CPUTAPID ] } {
 # Scan Tap
 # Wired to seperate STDO pin on the lpc3131, externally muxed to TDO on ea3131 module 
 # JTAGSEL pin must be 0 to activate, which reassigns arm tdo to a pass through.
-if { [info exists SJCTAPID ] } {
+if { [info exists SJCTAPID] } {
    set _SJCTAPID $SJCTAPID
 } else {
    set _SJCTAPID 0x1541E02B
@@ -52,7 +52,7 @@ dict set lpc313x wdt			0x13002400
 # Target configuration
 ##################################################################
 
-jtag_nsrst_delay 1000
+adapter_nsrst_delay 1000
 jtag_ntrst_delay 0
 
 set _TARGETNAME $_CHIPNAME.cpu
@@ -66,7 +66,7 @@ $_TARGETNAME configure -event reset-init {
 	echo "\nRunning reset init script for LPC3131\n"
 	halt
 	wait_halt
-	reg cpsr 0xa00000d3	#Supervisor mode
+	reg cpsr 0xa00000d3	;#Supervisor mode
 	reg pc 0x11029000
 	poll
 	sleep 500