X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Flpc2124.cfg;h=082e31211f524100c11bd51966a2d3237ef81763;hp=259088d3ce122e4c467b19e3a40b9aa93271ef1a;hb=e2c9518eda9d8416894dabe9ecad3a8227f95d09;hpb=9c3b4cfc5d47052df955d72e88fcb4d6a1e79a60

diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg
index 259088d3ce..082e31211f 100644
--- a/tcl/target/lpc2124.cfg
+++ b/tcl/target/lpc2124.cfg
@@ -1,4 +1,4 @@
-#LPC-2124 CPU
+# NXP LPC2124
 
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
@@ -6,20 +6,12 @@ if { [info exists CHIPNAME] } {
    set  _CHIPNAME lpc2124
 }
 
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
     set _CPUTAPID 0x4f1f0f0f
 }
 
-
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 
@@ -33,11 +25,10 @@ adapter_khz 1000
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
 
 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
-
 # flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum