X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Flpc1850.cfg;h=925a0498d660750486c923c062ad62b730b03b56;hp=94aec38fef3b66f6699397cd79f59accc08da396;hb=bdef93520a4721e1ed4ac4675476772fab064896;hpb=b7d2cdc0d4fc319169c60362708a67e2ff626525

diff --git a/tcl/target/lpc1850.cfg b/tcl/target/lpc1850.cfg
index 94aec38fef..925a0498d6 100644
--- a/tcl/target/lpc1850.cfg
+++ b/tcl/target/lpc1850.cfg
@@ -1,3 +1,4 @@
+source [find target/swj-dp.tcl]
 
 adapter_khz 500
 
@@ -21,11 +22,14 @@ if { [info exists M3_JTAG_TAPID] } {
    set _M3_JTAG_TAPID 0x4ba00477
 }
 
-jtag newtap $_CHIPNAME m3 -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_JTAG_TAPID
+swj_newdap $_CHIPNAME m3 -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_JTAG_TAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.m3
 
 set _TARGETNAME $_CHIPNAME.m3
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}