X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fkx.cfg;h=73ee62a79792b25e7c5f021b89f43902f5da7613;hp=7b0351706a9420d3cbf63f5eed40719aeed6e5ed;hb=bdef93520a4721e1ed4ac4675476772fab064896;hpb=5a2608bbbc55a63b940fe9da10aaf0c73fcd23dc

diff --git a/tcl/target/kx.cfg b/tcl/target/kx.cfg
index 7b0351706a..73ee62a797 100644
--- a/tcl/target/kx.cfg
+++ b/tcl/target/kx.cfg
@@ -30,9 +30,10 @@ if { [info exists CPUTAPID] } {
 }
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
@@ -44,7 +45,20 @@ adapter_khz 1000
 
 reset_config srst_nogate
 
-if {![using_hla]} {
+if {[using_hla]} {
+   echo ""
+   echo "!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!"
+   echo " Kinetis MCUs have a MDM-AP dedicated mainly to MCU security related functions."
+   echo " A high level adapter (like a ST-Link) you are currently using cannot access"
+   echo " the MDM-AP, so commands like 'mdm mass_erase' are not available in your"
+   echo " configuration. Also security locked state of the device will not be reported."
+   echo " Expect problems connecting to a blank device without boot ROM."
+   echo ""
+   echo " Be very careful as you can lock the device though there is no way to unlock"
+   echo " it without mass erase. Don't set write protection on the first block."
+   echo "!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!"
+   echo ""
+} {
    # Detect secured MCU or boot lock-up in RESET/WDOG loop
    $_CHIPNAME.cpu configure -event examine-start {
       kinetis mdm check_security