X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fat91sam3nXX.cfg;h=3450c2626ee1f0c97f711d07572540a4a0bec810;hp=32f163e320b355d6c6d02b18c37aef38972dacfb;hb=a15c11d7d08566dc7005ed7304c5d3f2c425b981;hpb=b7d2cdc0d4fc319169c60362708a67e2ff626525

diff --git a/tcl/target/at91sam3nXX.cfg b/tcl/target/at91sam3nXX.cfg
index 32f163e320..3450c2626e 100644
--- a/tcl/target/at91sam3nXX.cfg
+++ b/tcl/target/at91sam3nXX.cfg
@@ -3,6 +3,8 @@
 # Configuration for Atmel's SAM3N series
 #
 
+source [find target/swj-dp.tcl]
+
 if { [info exists CHIPNAME] } {
 	set _CHIPNAME $CHIPNAME
 } else {
@@ -15,15 +17,17 @@ if { [info exists CPUTAPID] } {
 	set _CPUTAPID 0x4ba00477
 }
 
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian little -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian little -dap $_CHIPNAME.dap
 
 set _FLASHNAME $_CHIPNAME.flash
 flash bank flash0 at91sam3 0x00400000 0 0 0 $_TARGETNAME
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
-
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}