X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fat91rm9200.cfg;h=2e8c1e091f7788dfa2abdda61ec61cae7888f2aa;hp=e20db5206df6fb1bf3cf2c6c2b39ce5905af5c92;hb=refs%2Fchanges%2F56%2F1856%2F2;hpb=71af49ca7fb11b0bd0c1ba9578826f49288b68ef

diff --git a/tcl/target/at91rm9200.cfg b/tcl/target/at91rm9200.cfg
index e20db5206d..2e8c1e091f 100644
--- a/tcl/target/at91rm9200.cfg
+++ b/tcl/target/at91rm9200.cfg
@@ -1,21 +1,19 @@
 # Atmel AT91rm9200
 # http://atmel.com/products/at91/
 
-reset_config trst_and_srst
-
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME at91rm9200
+   set _CHIPNAME at91rm9200
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x05b0203f
@@ -42,7 +40,7 @@ set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # AT91RM9200 has a 16K block of sram @ 0x0020.0000
-$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 \
+$_TARGETNAME configure -work-area-phys 0x00200000 \
 		-work-area-size 0x4000 -work-area-backup 1
 
 # This chip has a DCC ... use it