X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fpxa255_sst.cfg;h=8bc691bab190dee5b385012471c75d44d5d5c986;hp=76ae4c93bbe8436d22e240b605b7f56939e299c2;hb=3e6f9e8d1e65c4da505ff78481d54a115520d3d1;hpb=95da247b40d13600c37588d6be0ef8b3cc9abf2f

diff --git a/tcl/board/pxa255_sst.cfg b/tcl/board/pxa255_sst.cfg
index 76ae4c93bb..8bc691bab1 100644
--- a/tcl/board/pxa255_sst.cfg
+++ b/tcl/board/pxa255_sst.cfg
@@ -1,7 +1,7 @@
 # A PXA255 test board with SST 39LF400A flash
 #
 # At reset the memory map is as follows. Note that
-# the memory map changes later on as the application 
+# the memory map changes later on as the application
 # starts...
 #
 # RAM at 0x4000000
@@ -10,7 +10,7 @@
 source [find target/pxa255.cfg]
 
 # Target name is set by above
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x4000000 -work-area-size 0x4000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x4000000 -work-area-size 0x4000 -work-area-backup 0
 
 # flash bank <driver> <base> <size> <chip_width> <bus_width> <target> [options]
 flash bank cfi 0x00000000 0x80000 2 2 $_TARGETNAME jedec_probe