X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s3748.cfg;h=c95c21a6da70cf7666b997e0b217dac56b9a093a;hp=2c79a89fb07a85a0036cf10445dd2c3159c7873b;hb=146dfe32956de7d0fe1912a91c5268728ac0b7e0;hpb=e4cff09137466adc615e7e1a705791dfd2266103

diff --git a/tcl/board/ek-lm3s3748.cfg b/tcl/board/ek-lm3s3748.cfg
index 2c79a89fb0..c95c21a6da 100644
--- a/tcl/board/ek-lm3s3748.cfg
+++ b/tcl/board/ek-lm3s3748.cfg
@@ -1,17 +1,14 @@
-# Stellaris lm3s3748 Evaluation Kit
-#  http://www.luminarymicro.com/products/lm3s3748_usb_h_d_evaluation_kits.html
-
-# NOTE:  to use the on-board FT2232 JTAG interface:
-#  source [find interface/luminary.cfg]
-
-source [find target/lm3s3748.cfg]
-
-# LM3S parts don't support RTCK
-jtag_khz 500
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-# Board has only srst
-reset_config srst_only
-
+#
+# TI/Luminary Stellaris lm3s3748 Evaluation Kits
+#
+# http://www.ti.com/tool/ek-lm3s3748
+#
+
+# NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
+# so is using it in JTAG mode, as done here.
+source [find interface/luminary.cfg]
+
+# 20k working area
+set WORKAREASIZE 0x4000
+set CHIPNAME lm3s3748
+source [find target/stellaris.cfg]