X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Ftarget%2Ftarget%2Fstr730.cfg;h=c0dfcdd16e141d203da918e6c78c23fb6cc55796;hp=a65f75a05b5ae8563dfd50408f06953dc8b25e3f;hb=a28eaa85f73759bb189a46308642502c9fa5aa4b;hpb=ef1cfb23947bd32798077c6abb5c25a049460ae9

diff --git a/src/target/target/str730.cfg b/src/target/target/str730.cfg
index a65f75a05b..c0dfcdd16e 100644
--- a/src/target/target/str730.cfg
+++ b/src/target/target/str730.cfg
@@ -1,27 +1,46 @@
 #STR730 CPU
 
-
 jtag_khz 3000
 
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME str730
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {	
+   set  _CPUTAPID $CPUTAPID    
+} else {	 
+   set  _CPUTAPID 0xffffffff
+}
+
 
-#use combined on interfaces or targets that can’t set TRST/SRST separately
+#use combined on interfaces or targets that can't set TRST/SRST separately
 #reset_config trst_and_srst srst_pulls_trst
 reset_config trst_and_srst srst_pulls_trst
 
 #jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
+tag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 #jtag nTRST and nSRST delay
 jtag_nsrst_delay 500
 jtag_ntrst_delay 500
 
-target arm7tdmi little 0 arm7tdmi
-[new_target_name] configure -event old-pre_reset { jtag_khz 10 }
-[new_target_name] configure -event old-post_reset { jtag_khz 3000 }
-[new_target_name] configure -event old-gdb_program_config { script event/str730_program.script }
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+$_TARGETNAME configure -event reset-start { jtag_khz 10 }
+$_TARGETNAME configure -event reset-init { jtag_khz 3000 }
+$_TARGETNAME configure -event gdb-flash-erase-start {
+	flash protect 0 0 7 off
+}
 
-working_area 0 0x40000000 0x4000 nobackup
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x