X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Ftarget%2Ftarget%2Fstr710.cfg;h=3273efdd31df7faea6bebe5f36024ba2b4d2dc44;hp=ebf6b9b2341d3763a2f1e7191c74ed80ebf40153;hb=be968a54002b3387e0316c2fcce4ee93da840caa;hpb=72abcddbeb5ff2eb0cb259b0f4680fc0a77b9b3a

diff --git a/src/target/target/str710.cfg b/src/target/target/str710.cfg
index ebf6b9b234..3273efdd31 100644
--- a/src/target/target/str710.cfg
+++ b/src/target/target/str710.cfg
@@ -1,3 +1,7 @@
+#start slow, speed up after reset
+jtag_khz 10
+
+
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 
@@ -5,17 +9,15 @@ reset_config trst_and_srst srst_pulls_trst
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 4 0x1 0xf 0xe
 
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi
-run_and_halt_time 0 30
-
-target_script 0 gdb_program_config event/str710_program.script
-
-working_area 0 0x2000C000 0x4000 nobackup
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+[new_target_name] configure -event reset-start { jtag_khz 10 }
+[new_target_name] configure -event reset-init { jtag_khz 6000 }
+[new_target_name] configure -event old-gdb_program_config { script event/str710_program.script }
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0
 
 #flash bank str7x <base> <size> 0 0 <target#> <variant>
 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
+flash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x
 
 # For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+# openocd.texi