X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Ftarget%2Ftarget%2Fomap5912.cfg;h=5277593f094345d2328bad394b693c1b78e50773;hp=c7fd65099f90741ad4b6b6d2360132e32b694a1c;hb=a28eaa85f73759bb189a46308642502c9fa5aa4b;hpb=8fa479b6e6103fcce47fbf79c1ecb023dadf9b7e;ds=sidebyside

diff --git a/src/target/target/omap5912.cfg b/src/target/target/omap5912.cfg
index c7fd65099f..5277593f09 100644
--- a/src/target/target/omap5912.cfg
+++ b/src/target/target/omap5912.cfg
@@ -1,21 +1,63 @@
 #TI OMAP5912 dual core processor - http://www.ti.com 
 #on a OMAP5912 OSK board http://www.spectrumdigital.com.
 
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME omap5912
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+  # this defaults to a bigendian
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
 
 #jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 38 0x0 0x0 0x0
-jtag_device 4  0x1 0x0 0xe
-jtag_device 8  0x0 0x0 0x0
+jtag newtap $_CHIPNAME unknown1 -irlen 38 -ircapture 0x0 -irmask 0x0 
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0 -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME unknown2 irlen 8 -ircapture  0x0 -irmask 0x0 
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+
+$_TARGETNAME configure -event reset-init {
+	#
+	# halt target
+	#
+	poll
+	sleep 1
+	halt
+	wait_halt
+	#
+	# disable wdt
+	#
+	mww 0xfffec808 0x000000f5
+	mww 0xfffec808 0x000000a0
 
-target arm926ejs little 1 arm926ejs
-target_script 0 reset event/omap5912_reset.script
-run_and_halt_time 0 30
+	mww 0xfffeb048 0x0000aaaa
+	sleep 500
+	mww 0xfffeb048 0x00005555
+	sleep 500
+	#
+	# detect flash
+	#
+	flash probe 0
+}
 
 # omap5912 lcd frame buffer as working area
-working_area 0 0x20000000 0x3e800 nobackup
+$_TARGENAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x3e800 -work-area-backup 0
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 flash bank cfi 0x00000000 0x1000000 2 2 0