X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Ftarget%2Ftarget%2Flm3s3748.cfg;fp=src%2Ftarget%2Ftarget%2Flm3s3748.cfg;h=0000000000000000000000000000000000000000;hp=7321cb8ac7679dfe557656a9f8bf3174ebce7a02;hb=140d6c8e7948710a764965075bfaa700efd09802;hpb=7c0e823d0a57df99adc5b1b7975406bfd9e0d9fb;ds=sidebyside

diff --git a/src/target/target/lm3s3748.cfg b/src/target/target/lm3s3748.cfg
deleted file mode 100644
index 7321cb8ac7..0000000000
--- a/src/target/target/lm3s3748.cfg
+++ /dev/null
@@ -1,49 +0,0 @@
-# Script for luminary lm3s3748
-#
-# NB! work in progress! Duplicated from lm3s811.cfg, but does
-# it need modification??
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME lm3s3748
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-  # this defaults to a little endian
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # force an error till we get a good number
-   set _CPUTAPID 0x3ba00477
-}
-
-# RCLK 
-jtag_khz 500
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#lm3s3748 Evaluation Board has only srst
-reset_config srst_only
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID
-
-
-# the luminary variant causes a software reset rather than asserting SRST
-# this stops the debug registers from being cleared
-# this will be fixed in later revisions of silicon
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -variant lm3s
-
-# 8k working area at base of ram
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x2000 -work-area-backup 0
-
-#flash configuration
-flash bank stellaris 0 0 0 0 0