X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Ftarget%2Fcortex_m.c;h=62d37609816e42af50b744f6ef94b5fff24dbe26;hp=dcb3ddd8264f14f60ec4ef4880ec1d89f20fd66b;hb=9f021c2bc129f8f7c659c64ad19531bd8073264a;hpb=9f93cca42738cf0c5060296ef5899fee53fc642f diff --git a/src/target/cortex_m.c b/src/target/cortex_m.c index dcb3ddd826..62d3760981 100644 --- a/src/target/cortex_m.c +++ b/src/target/cortex_m.c @@ -42,7 +42,7 @@ /* NOTE: most of this should work fine for the Cortex-M1 and * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M. - * Some differences: M0/M1 doesn't have FBP remapping or the + * Some differences: M0/M1 doesn't have FPB remapping or the * DWT tracing/profiling support. (So the cycle counter will * not be usable; the other stuff isn't currently used here.) * @@ -165,7 +165,7 @@ static int cortex_m_single_step_core(struct target *target) struct armv7m_common *armv7m = &cortex_m->armv7m; int retval; - /* Mask interrupts before clearing halt, if done already. This avoids + /* Mask interrupts before clearing halt, if not done already. This avoids * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing * HALT can put the core into an unknown state. */ @@ -237,8 +237,11 @@ static int cortex_m_endreset_event(struct target *target) return retval; } - /* clear any interrupt masking */ - cortex_m_write_debug_halt_mask(target, 0, C_MASKINTS); + /* Restore proper interrupt masking setting. */ + if (cortex_m->isrmasking_mode == CORTEX_M_ISRMASK_ON) + cortex_m_write_debug_halt_mask(target, C_MASKINTS, 0); + else + cortex_m_write_debug_halt_mask(target, 0, C_MASKINTS); /* Enable features controlled by ITM and DWT blocks, and catch only * the vectors we were told to pay attention to. @@ -252,7 +255,7 @@ static int cortex_m_endreset_event(struct target *target) return retval; /* Paranoia: evidently some (early?) chips don't preserve all the - * debug state (including FBP, DWT, etc) across reset... + * debug state (including FPB, DWT, etc) across reset... */ /* Enable FPB */ @@ -507,7 +510,10 @@ static int cortex_m_poll(struct target *target) } if (cortex_m->dcb_dhcsr & S_RESET_ST) { - target->state = TARGET_RESET; + if (target->state != TARGET_RESET) { + target->state = TARGET_RESET; + LOG_INFO("%s: external reset detected", target_name(target)); + } return ERROR_OK; } @@ -561,6 +567,17 @@ static int cortex_m_poll(struct target *target) } } + /* Check that target is truly halted, since the target could be resumed externally */ + if ((prev_target_state == TARGET_HALTED) && !(cortex_m->dcb_dhcsr & S_HALT)) { + /* registers are now invalid */ + register_cache_invalidate(armv7m->arm.core_cache); + + target->state = TARGET_RUNNING; + LOG_WARNING("%s: external resume detected", target_name(target)); + target_call_event_callbacks(target, TARGET_EVENT_RESUMED); + retval = ERROR_OK; + } + /* Did we detect a failure condition that we cleared? */ if (detected_failure != ERROR_OK) retval = detected_failure; @@ -860,10 +877,17 @@ static int cortex_m_step(struct target *target, int current, else { /* Set a temporary break point */ - if (breakpoint) + if (breakpoint) { retval = cortex_m_set_breakpoint(target, breakpoint); - else - retval = breakpoint_add(target, pc_value, 2, BKPT_HARD); + } else { + enum breakpoint_type type = BKPT_HARD; + if (cortex_m->fp_rev == 0 && pc_value > 0x1FFFFFFF) { + /* FPB rev.1 cannot handle such addr, try BKPT instr */ + type = BKPT_SOFT; + } + retval = breakpoint_add(target, pc_value, 2, type); + } + bool tmp_bp_set = (retval == ERROR_OK); /* No more breakpoints left, just do a step */ @@ -1038,10 +1062,18 @@ static int cortex_m_assert_reset(struct target *target) retval = ERROR_OK; } else { /* Use a standard Cortex-M3 software reset mechanism. - * We default to using VECRESET as it is supported on all current cores. + * We default to using VECRESET as it is supported on all current cores + * (except Cortex-M0, M0+ and M1 which support SYSRESETREQ only!) * This has the disadvantage of not resetting the peripherals, so a * reset-init event handler is needed to perform any peripheral resets. */ + if (!cortex_m->vectreset_supported + && reset_config == CORTEX_M_RESET_VECTRESET) { + reset_config = CORTEX_M_RESET_SYSRESETREQ; + LOG_WARNING("VECTRESET is not supported on this Cortex-M core, using SYSRESETREQ instead."); + LOG_WARNING("Set 'cortex_m reset_config sysresetreq'."); + } + LOG_DEBUG("Using Cortex-M %s", (reset_config == CORTEX_M_RESET_SYSRESETREQ) ? "SYSRESETREQ" : "VECTRESET"); @@ -1274,7 +1306,7 @@ int cortex_m_remove_breakpoint(struct target *target, struct breakpoint *breakpo { struct cortex_m_common *cortex_m = target_to_cm(target); - /* REVISIT why check? FBP can be updated with core running ... */ + /* REVISIT why check? FPB can be updated with core running ... */ if (target->state != TARGET_HALTED) { LOG_WARNING("target not halted"); return ERROR_TARGET_NOT_HALTED; @@ -1983,7 +2015,7 @@ int cortex_m_examine(struct target *target) /* stlink shares the examine handler but does not support * all its calls */ if (!armv7m->stlink) { - if (cortex_m->apsel < 0) { + if (cortex_m->apsel == DP_APSEL_INVALID) { /* Search for the MEM-AP */ retval = dap_find_ap(swjdp, AP_TYPE_AHB_AP, &armv7m->debug_ap); if (retval != ERROR_OK) { @@ -2024,6 +2056,9 @@ int cortex_m_examine(struct target *target) } LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid); + /* VECTRESET is not supported on Cortex-M0, M0+ and M1 */ + cortex_m->vectreset_supported = i > 1; + if (i == 4) { target_read_u32(target, MVFR0, &mvfr0); target_read_u32(target, MVFR1, &mvfr1); @@ -2241,14 +2276,19 @@ static int cortex_m_init_arch_info(struct target *target, static int cortex_m_target_create(struct target *target, Jim_Interp *interp) { - struct cortex_m_common *cortex_m = calloc(1, sizeof(struct cortex_m_common)); - cortex_m->common_magic = CORTEX_M_COMMON_MAGIC; struct adiv5_private_config *pc; pc = (struct adiv5_private_config *)target->private_config; if (adiv5_verify_config(pc) != ERROR_OK) return ERROR_FAIL; + struct cortex_m_common *cortex_m = calloc(1, sizeof(struct cortex_m_common)); + if (cortex_m == NULL) { + LOG_ERROR("No memory creating target"); + return ERROR_FAIL; + } + + cortex_m->common_magic = CORTEX_M_COMMON_MAGIC; cortex_m->apsel = pc->ap_num; cortex_m_init_arch_info(target, cortex_m, pc->dap); @@ -2274,20 +2314,6 @@ static int cortex_m_verify_pointer(struct command_context *cmd_ctx, * cortexm3_target structure, which is only used with CM3 targets. */ -static const struct { - char name[10]; - unsigned mask; -} vec_ids[] = { - { "hard_err", VC_HARDERR, }, - { "int_err", VC_INTERR, }, - { "bus_err", VC_BUSERR, }, - { "state_err", VC_STATERR, }, - { "chk_err", VC_CHKERR, }, - { "nocp_err", VC_NOCPERR, }, - { "mm_err", VC_MMERR, }, - { "reset", VC_CORERESET, }, -}; - COMMAND_HANDLER(handle_cortex_m_vector_catch_command) { struct target *target = get_current_target(CMD_CTX); @@ -2296,6 +2322,20 @@ COMMAND_HANDLER(handle_cortex_m_vector_catch_command) uint32_t demcr = 0; int retval; + static const struct { + char name[10]; + unsigned mask; + } vec_ids[] = { + { "hard_err", VC_HARDERR, }, + { "int_err", VC_INTERR, }, + { "bus_err", VC_BUSERR, }, + { "state_err", VC_STATERR, }, + { "chk_err", VC_CHKERR, }, + { "nocp_err", VC_NOCPERR, }, + { "mm_err", VC_MMERR, }, + { "reset", VC_CORERESET, }, + }; + retval = cortex_m_verify_pointer(CMD_CTX, cortex_m); if (retval != ERROR_OK) return retval; @@ -2415,8 +2455,16 @@ COMMAND_HANDLER(handle_cortex_m_reset_config_command) if (CMD_ARGC > 0) { if (strcmp(*CMD_ARGV, "sysresetreq") == 0) cortex_m->soft_reset_config = CORTEX_M_RESET_SYSRESETREQ; - else if (strcmp(*CMD_ARGV, "vectreset") == 0) - cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET; + + else if (strcmp(*CMD_ARGV, "vectreset") == 0) { + if (target_was_examined(target) + && !cortex_m->vectreset_supported) + LOG_WARNING("VECTRESET is not supported on your Cortex-M core!"); + else + cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET; + + } else + return ERROR_COMMAND_SYNTAX_ERROR; } switch (cortex_m->soft_reset_config) { @@ -2458,7 +2506,7 @@ static const struct command_registration cortex_m_exec_command_handlers[] = { .handler = handle_cortex_m_reset_config_command, .mode = COMMAND_ANY, .help = "configure software reset handling", - .usage = "['srst'|'sysresetreq'|'vectreset']", + .usage = "['sysresetreq'|'vectreset']", }, COMMAND_REGISTRATION_DONE }; @@ -2496,6 +2544,7 @@ struct target_type cortexm_target = { .deassert_reset = cortex_m_deassert_reset, .soft_reset_halt = cortex_m_soft_reset_halt, + .get_gdb_arch = arm_get_gdb_arch, .get_gdb_reg_list = armv7m_get_gdb_reg_list, .read_memory = cortex_m_read_memory,