X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fjtag%2Fswd.h;h=487cb85bf01fcd2e23a05fe0a5f968fce36e6530;hp=5d00ab357cdace76dbf882047a442f707e348606;hb=HEAD;hpb=d2bb14e36a03cc187ca090a0da418acccb4098b4 diff --git a/src/jtag/swd.h b/src/jtag/swd.h index 5d00ab357c..5f626c1bf8 100644 --- a/src/jtag/swd.h +++ b/src/jtag/swd.h @@ -1,47 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + /*************************************************************************** * Copyright (C) 2009-2010 by David Brownell * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * ***************************************************************************/ -#ifndef SWD_H -#define SWD_H +#ifndef OPENOCD_JTAG_SWD_H +#define OPENOCD_JTAG_SWD_H +#include #include /* Bits in SWD command packets, written from host to target * first bit on the wire is START */ #define SWD_CMD_START (1 << 0) /* always set */ -#define SWD_CMD_APnDP (1 << 1) /* set only for AP access */ -#define SWD_CMD_RnW (1 << 2) /* set only for read access */ +#define SWD_CMD_APNDP (1 << 1) /* set only for AP access */ +#define SWD_CMD_RNW (1 << 2) /* set only for read access */ #define SWD_CMD_A32 (3 << 3) /* bits A[3:2] of register addr */ #define SWD_CMD_PARITY (1 << 5) /* parity of APnDP|RnW|A32 */ #define SWD_CMD_STOP (0 << 6) /* always clear for synch SWD */ -#define SWD_CMD_PARK (0 << 7) /* not driven by host (pull high) */ +#define SWD_CMD_PARK (1 << 7) /* driven high by host */ /* followed by TRN, 3-bits of ACK, TRN */ +/* + * The SWD subsystem error codes + */ +#define ERROR_SWD_FAIL (-400) /** protocol or parity error */ +#define ERROR_SWD_FAULT (-401) /** device returned FAULT in ACK field */ + /** * Construct a "cmd" byte, in lSB bit order, which swd_driver.read_reg() * and swd_driver.write_reg() methods will use directly. */ static inline uint8_t swd_cmd(bool is_read, bool is_ap, uint8_t regnum) { - uint8_t cmd = (is_ap ? SWD_CMD_APnDP : 0) - | (is_read ? SWD_CMD_RnW : 0) + uint8_t cmd = (is_ap ? SWD_CMD_APNDP : 0) + | (is_read ? SWD_CMD_RNW : 0) | ((regnum & 0xc) << 1); /* 8 cmd bits 4:1 may be set */ @@ -55,47 +49,247 @@ static inline uint8_t swd_cmd(bool is_read, bool is_ap, uint8_t regnum) /* SWD_ACK_* bits are defined in */ +/** + * Test if we can rely on ACK returned by SWD command + * + * @param cmd Byte constructed by swd_cmd(), START, STOP and TRN are filtered off + * @returns true if ACK should be checked, false if should be ignored + */ +static inline bool swd_cmd_returns_ack(uint8_t cmd) +{ + uint8_t base_cmd = cmd & (SWD_CMD_APNDP | SWD_CMD_RNW | SWD_CMD_A32); + + /* DPv2 does not reply to DP_TARGETSEL write cmd */ + return base_cmd != swd_cmd(false, false, DP_TARGETSEL); +} + +/** + * Convert SWD ACK value returned from DP to OpenOCD error code + * + * @param ack + * @returns error code + */ +static inline int swd_ack_to_error_code(uint8_t ack) +{ + switch (ack) { + case SWD_ACK_OK: + return ERROR_OK; + case SWD_ACK_WAIT: + return ERROR_WAIT; + case SWD_ACK_FAULT: + return ERROR_SWD_FAULT; + default: + return ERROR_SWD_FAIL; + } +} + +/* + * The following sequences are updated to + * ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031E + */ + +/** + * SWD Line reset. + * + * SWD Line reset is at least 50 SWCLK cycles with SWDIO driven high, + * followed by at least two idle (low) cycle. + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_line_reset[] = { + /* At least 50 SWCLK cycles with SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* At least 2 idle (low) cycles */ + 0x00, +}; +static const unsigned swd_seq_line_reset_len = 64; + +/** + * JTAG-to-SWD sequence. + * + * The JTAG-to-SWD sequence is at least 50 TCK/SWCLK cycles with TMS/SWDIO + * high, putting either interface logic into reset state, followed by a + * specific 16-bit sequence and finally a line reset in case the SWJ-DP was + * already in SWD mode. + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_jtag_to_swd[] = { + /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* Switching sequence from JTAG to SWD */ + 0x9e, 0xe7, + /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* At least 2 idle (low) cycles */ + 0x00, +}; +static const unsigned swd_seq_jtag_to_swd_len = 136; + +/** + * SWD-to-JTAG sequence. + * + * The SWD-to-JTAG sequence is at least 50 TCK/SWCLK cycles with TMS/SWDIO + * high, putting either interface logic into reset state, followed by a + * specific 16-bit sequence and finally at least 5 TCK/SWCLK cycles with + * TMS/SWDIO high to put the JTAG TAP in Test-Logic-Reset state. + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_swd_to_jtag[] = { + /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* Switching sequence from SWD to JTAG */ + 0x3c, 0xe7, + /* At least 5 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, +}; +static const unsigned swd_seq_swd_to_jtag_len = 80; + +/** + * SWD-to-dormant sequence. + * + * This is at least 50 SWCLK cycles with SWDIO high to put the interface + * in reset state, followed by a specific 16-bit sequence. + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_swd_to_dormant[] = { + /* At least 50 SWCLK cycles with SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* Switching sequence from SWD to dormant */ + 0xbc, 0xe3, +}; +static const unsigned swd_seq_swd_to_dormant_len = 72; + +/** + * Dormant-to-SWD sequence. + * + * This is at least 8 TCK/SWCLK cycles with TMS/SWDIO high to abort any ongoing + * selection alert sequence, followed by a specific 128-bit selection alert + * sequence, followed by 4 TCK/SWCLK cycles with TMS/SWDIO low, followed by + * a specific protocol-dependent activation code. For SWD the activation code + * is an 8-bit sequence. The sequence ends with a line reset. + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_dormant_to_swd[] = { + /* At least 8 SWCLK cycles with SWDIO high */ + 0xff, + /* Selection alert sequence */ + 0x92, 0xf3, 0x09, 0x62, 0x95, 0x2d, 0x85, 0x86, + 0xe9, 0xaf, 0xdd, 0xe3, 0xa2, 0x0e, 0xbc, 0x19, + /* + * 4 SWCLK cycles with SWDIO low ... + * + SWD activation code 0x1a ... + * + at least 8 SWCLK cycles with SWDIO high + */ + 0xa0, /* ((0x00) & GENMASK(3, 0)) | ((0x1a << 4) & GENMASK(7, 4)) */ + 0xf1, /* ((0x1a >> 4) & GENMASK(3, 0)) | ((0xff << 4) & GENMASK(7, 4)) */ + 0xff, + /* At least 50 SWCLK cycles with SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* At least 2 idle (low) cycles */ + 0x00, +}; +static const unsigned swd_seq_dormant_to_swd_len = 224; + +/** + * JTAG-to-dormant sequence. + * + * This is at least 5 TCK cycles with TMS high to put the interface + * in test-logic-reset state, followed by a specific 31-bit sequence. + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_jtag_to_dormant[] = { + /* At least 5 TCK cycles with TMS high */ + 0xff, + /* + * Still one TCK cycle with TMS high followed by 31 bits JTAG-to-DS + * select sequence 0xba, 0xbb, 0xbb, 0x33, + */ + 0x75, /* ((0xff >> 7) & GENMASK(0, 0)) | ((0xba << 1) & GENMASK(7, 1)) */ + 0x77, /* ((0xba >> 7) & GENMASK(0, 0)) | ((0xbb << 1) & GENMASK(7, 1)) */ + 0x77, /* ((0xbb >> 7) & GENMASK(0, 0)) | ((0xbb << 1) & GENMASK(7, 1)) */ + 0x67, /* ((0xbb >> 7) & GENMASK(0, 0)) | ((0x33 << 1) & GENMASK(7, 1)) */ +}; +static const unsigned swd_seq_jtag_to_dormant_len = 40; + +/** + * Dormant-to-JTAG sequence. + * + * This is at least 8 TCK/SWCLK cycles with TMS/SWDIO high to abort any ongoing + * selection alert sequence, followed by a specific 128-bit selection alert + * sequence, followed by 4 TCK/SWCLK cycles with TMS/SWDIO low, followed by + * a specific protocol-dependent activation code. For JTAG there are two + * possible activation codes: + * - "JTAG-Serial": 12 bits 0x00, 0x00 + * - "Arm CoreSight JTAG-DP": 8 bits 0x0a + * We use "JTAG-Serial" only, which seams more generic. + * Since the target TAP can be either in Run/Test Idle or in Test-Logic-Reset + * states, Arm recommends to put the TAP in Run/Test Idle using one TCK cycle + * with TMS low. To keep the sequence length multiple of 8, 8 TCK cycle with + * TMS low are sent (allowed by JTAG state machine). + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_dormant_to_jtag[] = { + /* At least 8 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, + /* Selection alert sequence */ + 0x92, 0xf3, 0x09, 0x62, 0x95, 0x2d, 0x85, 0x86, + 0xe9, 0xaf, 0xdd, 0xe3, 0xa2, 0x0e, 0xbc, 0x19, + /* + * 4 TCK/SWCLK cycles with TMS/SWDIO low ... + * + 12 bits JTAG-serial activation code 0x00, 0x00 + */ + 0x00, 0x00, + /* put the TAP in Run/Test Idle */ + 0x00, +}; +static const unsigned swd_seq_dormant_to_jtag_len = 160; + struct swd_driver { /** * Initialize the debug link so it can perform SWD operations. - * @param trn value from WCR: how many clocks - * to not drive the SWDIO line at certain points in - * the SWD protocol (at least 1 clock). * * As an example, this would switch a dual-mode debug adapter * into SWD mode and out of JTAG mode. * * @return ERROR_OK on success, else a negative fault code. */ - int (*init)(uint8_t trn); + int (*init)(void); + /** + * Queue a special SWDIO sequence. + * + * @param seq The special sequence to generate. + * @return ERROR_OK if the sequence was queued, negative error if the + * sequence is unsupported. + */ + int (*switch_seq)(enum swd_special_seq seq); /** * Queued read of an AP or DP register. * - * @param dap The DAP controlled by the SWD link. * @param Command byte with APnDP/RnW/addr/parity bits * @param Where to store value to read from register + * @param ap_delay_hint Number of idle cycles that may be + * needed after an AP access to avoid WAITs */ - void (*read_reg)(struct adiv5_dap *dap, uint8_t cmd, uint32_t *value); + void (*read_reg)(uint8_t cmd, uint32_t *value, uint32_t ap_delay_hint); /** * Queued write of an AP or DP register. * - * @param dap The DAP controlled by the SWD link. * @param Command byte with APnDP/RnW/addr/parity bits * @param Value to be written to the register + * @param ap_delay_hint Number of idle cycles that may be + * needed after an AP access to avoid WAITs */ - void (*write_reg)(struct adiv5_dap *dap, uint8_t cmd, uint32_t value); + void (*write_reg)(uint8_t cmd, uint32_t value, uint32_t ap_delay_hint); /** * Execute any queued transactions and collect the result. * - * @param dap The DAP controlled by the SWD link. * @return ERROR_OK on success, Ack response code on WAIT/FAULT * or negative error code on other kinds of failure. */ - int (*run)(struct adiv5_dap *dap); + int (*run)(void); /** * Configures data collection from the Single-wire @@ -109,13 +303,9 @@ struct swd_driver { * * @return ERROR_OK on success, else a negative fault code. */ - int *(*trace)(struct adiv5_dap *dap, bool swo); + int *(*trace)(bool swo); }; int swd_init_reset(struct command_context *cmd_ctx); -void swd_add_reset(int req_srst); - -bool transport_is_swd(void); -bool transport_is_cmsis_dap(void); -#endif /* SWD_H */ +#endif /* OPENOCD_JTAG_SWD_H */