-------------------------------------------*/
+
+/* The "Cable Helper API" is what the cable drivers can use to help implement
+ * their "Cable API". So a Cable Helper API is a set of helper functions used by
+ * cable drivers, and this is different from a Cable API. A "Cable API" is what
+ * higher level code used to talk to a cable.
+ */
+
-extern enum tap_state end_state; /* finish DR scans in dr_end_state */
-extern enum tap_state cur_state; /* current TAP state */
+/** implementation of wrapper function tap_set_state() */
+void tap_set_state_impl(tap_state_t new_state);
-extern enum tap_state cmd_queue_end_state; /* finish DR scans in dr_end_state */
-extern enum tap_state cmd_queue_cur_state; /* current TAP state */
+/**
+ * Function tap_set_state
+ * sets the state of a "state follower" which tracks the state of the TAPs connected to the
+ * cable. The state follower is hopefully always in the same state as the actual
+ * TAPs in the jtag chain, and will be so if there are no bugs in the tracking logic within that
+ * cable driver. All the cable drivers call this function to indicate the state they think
+ * the TAPs attached to their cables are in. Because this function can also log transitions,
+ * it will be helpful to call this function with every transition that the TAPs being manipulated
+ * are expected to traverse, not just end points of a multi-step state path.
+ * @param new_state is the state we think the TAPs are currently in or are about to enter.
+ */
+#if defined(_DEBUG_JTAG_IO_)
+#define tap_set_state(new_state) \
+ do { \
+ LOG_DEBUG( "tap_set_state(%s)", tap_state_name(new_state) ); \
+ tap_set_state_impl(new_state); \
+ } while (0)
+#else
+static inline void tap_set_state(tap_state_t new_state)
+{
+ tap_set_state_impl(new_state);
+}
-#define TAP_MOVE(from, to) tap_move[tap_move_map[from]][tap_move_map[to]]
+#endif
-typedef void * error_handler_t; /* Later on we can delete error_handler_t, but keep it for now to make patches more readable */
+/**
+ * Function tap_get_state
+ * gets the state of the "state follower" which tracks the state of the TAPs connected to
+ * the cable.
+ * @see tap_set_state
+ * @return tap_state_t - The state the TAPs are in now.
+ */
+tap_state_t tap_get_state(void);
+
+/**
+ * Function tap_set_end_state
+ * sets the state of an "end state follower" which tracks the state that any cable driver
+ * thinks will be the end (resultant) state of the current TAP SIR or SDR operation. At completion
+ * of that TAP operation this value is copied into the state follower via tap_set_state().
+ * @param new_end_state is that state the TAPs should enter at completion of a pending TAP operation.
+ */
+void tap_set_end_state(tap_state_t new_end_state);
+
+/**
+ * Function tap_get_end_state
+ * @see tap_set_end_state
+ * @return tap_state_t - The state the TAPs should be in at completion of the current TAP operation.
+ */
+tap_state_t tap_get_end_state(void);
+
+/**
+ * Function tap_get_tms_path
+ * returns a 7 bit long "bit sequence" indicating what has to be done with TMS
+ * during a sequence of seven TAP clock cycles in order to get from
+ * state \a "from" to state \a "to".
+ * @param from is the starting state
+ * @param to is the resultant or final state
+ * @return int - a 7 bit sequence, with the first bit in the sequence at bit 0.
+ */
+int tap_get_tms_path(tap_state_t from, tap_state_t to);
+
+
+/**
+ * Function int tap_get_tms_path_len
+ * returns the total number of bits that represents a TMS path
+ * transition as given by the function tap_get_tms_path().
+ *
+ * For at least one interface (JLink) it's not OK to simply "pad" TMS sequences
+ * to fit a whole byte. (I suspect this is a general TAP problem within OOCD.)
+ * Padding TMS causes all manner of instability that's not easily
+ * discovered. Using this routine we can apply EXACTLY the state transitions
+ * required to make something work - no more - no less.
+ *
+ * @param from is the starting state
+ * @param to is the resultant or final state
+ * @return int - the total number of bits in a transition.
+ */
+int tap_get_tms_path_len(tap_state_t from, tap_state_t to);
+
+
+/**
+ * Function tap_move_ndx
+ * when given a stable state, returns an index from 0-5. The index corresponds to a
+ * sequence of stable states which are given in this order:
+ * { TAP_RESET, TAP_IDLE, TAP_DRSHIFT, TAP_DRPAUSE, TAP_IRSHIFT, TAP_IRPAUSE }
+ *
+ * This sequence corresponds to look up tables which are used in some of the
+ * cable drivers.
+ * @param astate is the stable state to find in the sequence. If a non stable
+ * state is passed, this may cause the program to output an error message
+ * and terminate.
+ * @return int - the array (or sequence) index as described above
+ */
+int tap_move_ndx(tap_state_t astate);
+
+/**
+ * Function tap_is_state_stable
+ * returns true if the \a astate is stable.
+ */
+bool tap_is_state_stable(tap_state_t astate);
+
+/**
+ * Function tap_state_transition
+ * takes a current TAP state and returns the next state according to the tms value.
+ * @param current_state is the state of a TAP currently.
+ * @param tms is either zero or non-zero, just like a real TMS line in a jtag interface.
+ * @return tap_state_t - the next state a TAP would enter.
+ */
+tap_state_t tap_state_transition(tap_state_t current_state, bool tms);
+
+/**
+ * Function tap_state_name
+ * Returns a string suitable for display representing the JTAG tap_state
+ */
+const char* tap_state_name(tap_state_t state);
+
+#ifdef _DEBUG_JTAG_IO_
+/**
+ * @brief Prints verbose TAP state transitions for the given TMS/TDI buffers.
+ * @param tms_buf must points to a buffer containing the TMS bitstream.
+ * @param tdi_buf must points to a buffer containing the TDI bitstream.
+ * @param tap_len must specify the length of the TMS/TDI bitstreams.
+ * @param start_tap_state must specify the current TAP state.
+ * @returns the final TAP state; pass as @a start_tap_state in following call.
+ */
+tap_state_t jtag_debug_state_machine(const void *tms_buf, const void *tdi_buf,
+ unsigned tap_len, tap_state_t start_tap_state);
+#else
+static inline tap_state_t jtag_debug_state_machine(const void *tms_buf,
+ const void *tdi_buf, unsigned tap_len, tap_state_t start_tap_state)
+{
+ return start_tap_state;
+}
+#endif // _DEBUG_JTAG_IO_
+
+/*-----
------------------------------------------*/
+
+
+extern tap_state_t cmd_queue_end_state; /* finish DR scans in dr_end_state */
+extern tap_state_t cmd_queue_cur_state; /* current TAP state */
+
+typedef void* error_handler_t; /* Later on we can delete error_handler_t, but keep it for now to make patches more readable */
struct scan_field_s;
-typedef int (*in_handler_t)(u8 *in_value, void *priv, struct scan_field_s *field);
+typedef int (*in_handler_t)(u8* in_value, void* priv, struct scan_field_s* field);
typedef struct scan_field_s
{
- jtag_tap_t *tap; /* tap pointer this instruction refers to */
- int num_bits; /* number of bits this field specifies (up to 32) */
- u8 *out_value; /* value to be scanned into the device */
- u8 *out_mask; /* only masked bits care */
- u8 *in_value; /* pointer to a 32-bit memory location to take data scanned out */
- /* in_check_value/mask, in_handler_error_handler, in_handler_priv can be used by the in handler, otherwise they contain garbage */
- u8 *in_check_value; /* used to validate scan results */
- u8 *in_check_mask; /* check specified bits against check_value */
- in_handler_t in_handler; /* process received buffer using this handler */
- void *in_handler_priv; /* additional information for the in_handler */
+ jtag_tap_t* tap; /* tap pointer this instruction refers to */
+ int num_bits; /* number of bits this field specifies (up to 32) */
+ u8* out_value; /* value to be scanned into the device */
+ u8* in_value; /* pointer to a 32-bit memory location to take data scanned out */
+
+ u8* check_value; /* Used together with jtag_add_dr_scan_check() to check data clocked
+ in */
+ u8* check_mask; /* mask to go with check_value */
+
+ /* internal work space */
+ int allocated; /* in_value has been allocated for the queue */
+ int modified; /* did we modify the in_value? */
+ u8 intmp[4]; /* temporary storage for checking synchronously */
} scan_field_t;
-
-enum scan_type
-{
+enum scan_type {
/* IN: from device to host, OUT: from host to device */
SCAN_IN = 1, SCAN_OUT = 2, SCAN_IO = 3
};
typedef struct scan_command_s
{
- int ir_scan; /* instruction/not data scan */
- int num_fields; /* number of fields in *fields array */
- scan_field_t *fields; /* pointer to an array of data scan fields */
- enum tap_state end_state; /* TAP state in which JTAG commands should finish */
+ int ir_scan; /* instruction/not data scan */
+ int num_fields; /* number of fields in *fields array */
+ scan_field_t* fields; /* pointer to an array of data scan fields */
+ tap_state_t end_state; /* TAP state in which JTAG commands should finish */
} scan_command_t;
typedef struct statemove_command_s
{
- enum tap_state end_state; /* TAP state in which JTAG commands should finish */
+ tap_state_t end_state; /* TAP state in which JTAG commands should finish */
} statemove_command_t;
typedef struct pathmove_command_s
{
- int num_states; /* number of states in *path */
- enum tap_state *path; /* states that have to be passed */
+ int num_states; /* number of states in *path */
+ tap_state_t* path; /* states that have to be passed */
} pathmove_command_t;
typedef struct runtest_command_s
{
- int num_cycles; /* number of cycles that should be spent in Run-Test/Idle */
- enum tap_state end_state; /* TAP state in which JTAG commands should finish */
+ int num_cycles; /* number of cycles that should be spent in Run-Test/Idle */
+ tap_state_t end_state; /* TAP state in which JTAG commands should finish */
} runtest_command_t;
+
+typedef struct stableclocks_command_s
+{
+ int num_cycles; /* number of clock cycles that should be sent */
+} stableclocks_command_t;
+
+
typedef struct reset_command_s
{
- int trst; /* trst/srst 0: deassert, 1: assert, -1: don't change */
+ int trst; /* trst/srst 0: deassert, 1: assert, -1: don't change */
int srst;
} reset_command_t;
typedef struct end_state_command_s
{
- enum tap_state end_state; /* TAP state in which JTAG commands should finish */
+ tap_state_t end_state; /* TAP state in which JTAG commands should finish */
} end_state_command_t;
typedef struct sleep_command_s
{
- u32 us; /* number of microseconds to sleep */
+ u32 us; /* number of microseconds to sleep */
} sleep_command_t;
typedef union jtag_command_container_u
{
- scan_command_t *scan;
- statemove_command_t *statemove;
- pathmove_command_t *pathmove;
- runtest_command_t *runtest;
- reset_command_t *reset;
- end_state_command_t *end_state;
- sleep_command_t *sleep;
+ scan_command_t* scan;
+ statemove_command_t* statemove;
+ pathmove_command_t* pathmove;
+ runtest_command_t* runtest;
+ stableclocks_command_t* stableclocks;
+ reset_command_t* reset;
+ end_state_command_t* end_state;
+ sleep_command_t* sleep;
} jtag_command_container_t;
-enum jtag_command_type
-{
- JTAG_SCAN = 1,
- JTAG_STATEMOVE = 2, JTAG_RUNTEST = 3,
- JTAG_RESET = 4, JTAG_END_STATE = 5,
- JTAG_PATHMOVE = 6, JTAG_SLEEP = 7
+enum jtag_command_type {
+ JTAG_SCAN = 1,
+ JTAG_STATEMOVE = 2,
+ JTAG_RUNTEST = 3,
+ JTAG_RESET = 4,
+ JTAG_END_STATE = 5,
+ JTAG_PATHMOVE = 6,
+ JTAG_SLEEP = 7,
+ JTAG_STABLECLOCKS = 8
};
typedef struct jtag_command_s
{
jtag_command_container_t cmd;
- enum jtag_command_type type;
- struct jtag_command_s *next;
+ enum jtag_command_type type;
+ struct jtag_command_s* next;
} jtag_command_t;
-extern jtag_command_t *jtag_command_queue;
+extern jtag_command_t* jtag_command_queue;
-// this is really: typedef jtag_tap_t
-// But - the typedef is done in "types.h"
-// due to "forward decloration reasons"
+/* forward declaration */
+typedef struct jtag_tap_event_action_s jtag_tap_event_action_t;
+
+/* this is really: typedef jtag_tap_t */
+/* But - the typedef is done in "types.h" */
+/* due to "forward decloration reasons" */
struct jtag_tap_s
{
- const char *chip;
- const char *tapname;
- const char *dotted_name;
+ const char* chip;
+ const char* tapname;
+ const char* dotted_name;
int abs_chain_position;
- int enabled;
- int ir_length; /* size of instruction register */
- u32 ir_capture_value;
- u8 *expected; /* Capture-IR expected value */
- u32 ir_capture_mask;
- u8 *expected_mask; /* Capture-IR expected mask */
- u32 idcode; /* device identification code */
- u32 *expected_ids; /* Array of expected identification codes */
- u8 expected_ids_cnt;/* Number of expected identification codes */
- u8 *cur_instr; /* current instruction */
- int bypass; /* bypass register selected */
- jtag_tap_t *next_tap;
+ int enabled;
+ int ir_length; /* size of instruction register */
+ u32 ir_capture_value;
+ u8* expected; /* Capture-IR expected value */
+ u32 ir_capture_mask;
+ u8* expected_mask; /* Capture-IR expected mask */
+ u32 idcode; /* device identification code */
+ u32* expected_ids; /* Array of expected identification codes */
+ u8 expected_ids_cnt; /* Number of expected identification codes */
+ u8* cur_instr; /* current instruction */
+ int bypass; /* bypass register selected */
+
+ jtag_tap_event_action_t* event_action;
+
+ jtag_tap_t* next_tap;
};
-extern jtag_tap_t *jtag_AllTaps(void);
-extern jtag_tap_t *jtag_TapByPosition(int n);
-extern jtag_tap_t *jtag_TapByPosition( int n );
-extern jtag_tap_t *jtag_TapByString( const char *dotted_name );
-extern jtag_tap_t *jtag_TapByJimObj( Jim_Interp *interp, Jim_Obj *obj );
-extern jtag_tap_t *jtag_TapByAbsPosition( int abs_position );
+extern jtag_tap_t* jtag_AllTaps(void);
+extern jtag_tap_t* jtag_TapByPosition(int n);
+extern jtag_tap_t* jtag_TapByString(const char* dotted_name);
+extern jtag_tap_t* jtag_TapByJimObj(Jim_Interp* interp, Jim_Obj* obj);
+extern jtag_tap_t* jtag_TapByAbsPosition(int abs_position);
extern int jtag_NumEnabledTaps(void);
extern int jtag_NumTotalTaps(void);
-
-static __inline__ jtag_tap_t *
-jtag_NextEnabledTap( jtag_tap_t *p )
+static __inline__ jtag_tap_t* jtag_NextEnabledTap(jtag_tap_t* p)
{
- if( p == NULL ){
- // start at the head of list
+ if (p == NULL)
+ {
+ /* start at the head of list */
p = jtag_AllTaps();
- } else {
- // start *after* this one
+ }
+ else
+ {
+ /* start *after* this one */
p = p->next_tap;
}
- while( p ){
- if( p->enabled ){
+ while (p)
+ {
+ if (p->enabled)
+ {
break;
- } else {
+ }
+ else
+ {
p = p->next_tap;
}
}
+
return p;
}
-
-
-enum reset_line_mode
-{
+enum reset_line_mode {
LINE_OPEN_DRAIN = 0x0,
- LINE_PUSH_PULL = 0x1,
+ LINE_PUSH_PULL = 0x1,
};
typedef struct jtag_interface_s
@@ -230,78 +445,90 @@ typedef struct jtag_interface_s
/* interface initalization
*/
int (*speed)(int speed);
- int (*register_commands)(struct command_context_s *cmd_ctx);
+ int (*register_commands)(struct command_context_s* cmd_ctx);
int (*init)(void);
int (*quit)(void);
+
/* returns JTAG maxium speed for KHz. 0=RTCK. The function returns
- a failure if it can't support the KHz/RTCK.
-
- WARNING!!!! if RTCK is *slow* then think carefully about
- whether you actually want to support this in the driver.
- Many target scripts are written to handle the absence of RTCK
- and use a fallback kHz TCK.
- */
- int (*khz)(int khz, int *jtag_speed);
+ * a failure if it can't support the KHz/RTCK.
+ *
+ * WARNING!!!! if RTCK is *slow* then think carefully about
+ * whether you actually want to support this in the driver.
+ * Many target scripts are written to handle the absence of RTCK
+ * and use a fallback kHz TCK.
+ */
+ int (*khz)(int khz, int* jtag_speed);
+
/* returns the KHz for the provided JTAG speed. 0=RTCK. The function returns
- a failure if it can't support the KHz/RTCK. */
- int (*speed_div)(int speed, int *khz);
+ * a failure if it can't support the KHz/RTCK. */
+ int (*speed_div)(int speed, int* khz);
/* Read and clear the power dropout flag. Note that a power dropout
- can be transitionary, easily much less than a ms.
-
- So to find out if the power is *currently* on, you must invoke
- this method twice. Once to clear the power dropout flag and a
- second time to read the current state.
+ * can be transitionary, easily much less than a ms.
+ *
+ * So to find out if the power is *currently* on, you must invoke
+ * this method twice. Once to clear the power dropout flag and a
+ * second time to read the current state.
+ *
+ * Currently the default implementation is never to detect power dropout.
+ */
+ int (*power_dropout)(int* power_dropout);
- Currently the default implementation is never to detect power dropout.
- */
- int (*power_dropout)(int *power_dropout);
/* Read and clear the srst asserted detection flag.
*
* NB!!!! like power_dropout this does *not* read the current
* state. srst assertion is transitionary and *can* be much
* less than 1ms.
*/
- int (*srst_asserted)(int *srst_asserted);
-
+ int (*srst_asserted)(int* srst_asserted);
} jtag_interface_t;
-enum jtag_event
-{
+enum jtag_event {
JTAG_TRST_ASSERTED
};
extern char* jtag_event_strings[];
+enum jtag_tap_event {
+ JTAG_TAP_EVENT_ENABLE,
+ JTAG_TAP_EVENT_DISABLE
+};
+
+extern const Jim_Nvp nvp_jtag_tap_event[];
+
+struct jtag_tap_event_action_s
+{
+ enum jtag_tap_event event;
+ Jim_Obj* body;
+ jtag_tap_event_action_t* next;
+};
+
extern int jtag_trst;
extern int jtag_srst;
typedef struct jtag_event_callback_s
{
- int (*callback)(enum jtag_event event, void *priv);
- void *priv;
- struct jtag_event_callback_s *next;
+ int (*callback)(enum jtag_event event, void* priv);
+ void* priv;
+ struct jtag_event_callback_s* next;
} jtag_event_callback_t;
-extern jtag_event_callback_t *jtag_event_callbacks;
+extern jtag_event_callback_t* jtag_event_callbacks;
-extern jtag_interface_t *jtag; /* global pointer to configured JTAG interface */
-extern enum tap_state end_state;
-extern enum tap_state cur_state;
+extern jtag_interface_t* jtag; /* global pointer to configured JTAG interface */
extern int jtag_speed;
extern int jtag_speed_post_reset;
-enum reset_types
-{
- RESET_NONE = 0x0,
- RESET_HAS_TRST = 0x1,
- RESET_HAS_SRST = 0x2,
- RESET_TRST_AND_SRST = 0x3,
+enum reset_types {
+ RESET_NONE = 0x0,
+ RESET_HAS_TRST = 0x1,
+ RESET_HAS_SRST = 0x2,
+ RESET_TRST_AND_SRST = 0x3,
RESET_SRST_PULLS_TRST = 0x4,
RESET_TRST_PULLS_SRST = 0x8,
RESET_TRST_OPEN_DRAIN = 0x10,
- RESET_SRST_PUSH_PULL = 0x20,
+ RESET_SRST_PUSH_PULL = 0x20,
};
extern enum reset_types jtag_reset_config;
@@ -309,18 +536,20 @@ extern enum reset_types jtag_reset_config;
/* initialize interface upon startup. A successful no-op
* upon subsequent invocations
*/
-extern int jtag_interface_init(struct command_context_s *cmd_ctx);
-/* initialize JTAG chain using only a TLR reset. If init fails,
+extern int jtag_interface_init(struct command_context_s* cmd_ctx);
+
+/* initialize JTAG chain using only a RESET reset. If init fails,
* try reset + init.
*/
-extern int jtag_init(struct command_context_s *cmd_ctx);
+extern int jtag_init(struct command_context_s* cmd_ctx);
+
/* reset, then initialize JTAG chain */
-extern int jtag_init_reset(struct command_context_s *cmd_ctx);
-extern int jtag_register_commands(struct command_context_s *cmd_ctx);
+extern int jtag_init_reset(struct command_context_s* cmd_ctx);
+extern int jtag_register_commands(struct command_context_s* cmd_ctx);
/* JTAG interface, can be implemented with a software or hardware fifo
*
- * TAP_DRSHIFT and TAP_IRSHIFT are illegal end states. TAP_DRSHIFT/SI as end states
+ * TAP_DRSHIFT and TAP_IRSHIFT are illegal end states. TAP_DRSHIFT/IRSHIFT as end states
* can be emulated by using a larger scan.
*
* Code that is relatively insensitive to the path(as long
@@ -330,20 +559,122 @@ extern int jtag_register_commands(struct command_context_s *cmd_ctx);
* be issued.
*
*/
-extern void jtag_add_ir_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern int interface_jtag_add_ir_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern void jtag_add_dr_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern int interface_jtag_add_dr_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern void jtag_add_plain_ir_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern int interface_jtag_add_plain_ir_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern void jtag_add_plain_dr_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern int interface_jtag_add_plain_dr_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
+extern void jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+/* same as jtag_add_ir_scan except no verify is performed */
+extern void jtag_add_ir_scan_noverify(int num_fields, scan_field_t *fields, tap_state_t state);
+extern int interface_jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern void jtag_add_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+
+/* set in_value to point to 32 bits of memory to scan into. This function
+ * is a way to handle the case of synchronous and asynchronous
+ * JTAG queues.
+ *
+ * In the event of an asynchronous queue execution the queue buffer
+ * allocation method is used, for the synchronous case the temporary 32 bits come
+ * from the input field itself.
+ */
+
+#ifndef HAVE_JTAG_MINIDRIVER_H
+extern void jtag_alloc_in_value32(scan_field_t *field);
+#else
+static __inline__ void jtag_alloc_in_value32(scan_field_t *field)
+{
+ field->in_value=field->intmp;
+}
+#endif
+
+
+
+/* This version of jtag_add_dr_scan() uses the check_value/mask fields */
+extern void jtag_add_dr_scan_check(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern int interface_jtag_add_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern void jtag_add_plain_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern int interface_jtag_add_plain_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern void jtag_add_plain_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern int interface_jtag_add_plain_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+
+
+/* Simplest/typical callback - do some conversion on the data clocked in.
+ * This callback is for such conversion that can not fail.
+ * For conversion types or checks that can
+ * fail, use the jtag_callback_t variant */
+typedef void (*jtag_callback1_t)(u8 *in);
+
+#ifndef HAVE_JTAG_MINIDRIVER_H
+/* A simpler version of jtag_add_callback4 */
+extern void jtag_add_callback(jtag_callback1_t, u8 *in);
+#else
+/* implemented by minidriver */
+#endif
+
+/* This type can store an integer safely by a normal cast on 64 and
+ * 32 bit systems. */
+typedef intptr_t jtag_callback_data_t;
+
+/* The generic callback mechanism.
+ *
+ * The callback is invoked with three arguments. The first argument is
+ * the pointer to the data clocked in.
+ */
+typedef int (*jtag_callback_t)(u8 *in, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3);
+
+
+/* This callback can be executed immediately the queue has been flushed. Note that
+ * the JTAG queue can either be executed synchronously or asynchronously. Typically
+ * for USB the queue is executed asynchronously. For low latency interfaces, the
+ * queue may be executed synchronously.
+ *
+ * These callbacks are typically executed *after* the *entire* JTAG queue has been
+ * executed for e.g. USB interfaces.
+ *
+ * The callbacks are guaranteeed to be invoked in the order that they were queued.
+ *
+ * The strange name is due to C's lack of overloading using function arguments
+ *
+ * The callback mechansim is very general and does not really make any assumptions
+ * about what the callback does and what the arguments are.
+ *
+ * in - typically used to point to the data to operate on. More often than not
+ * this will be the data clocked in during a shift operation
+ *
+ * data1 - an integer that is big enough to be used either as an 'int' or
+ * cast to/from a pointer
+ *
+ * data2 - an integer that is big enough to be used either as an 'int' or
+ * cast to/from a pointer
+ *
+ * Why stop at 'data2' for arguments? Somewhat historical reasons. This is
+ * sufficient to implement the jtag_check_value_mask(), besides the
+ * line is best drawn somewhere...
+ *
+ * If the execution of the queue fails before the callbacks, then the
+ * callbacks may or may not be invoked depending on driver implementation.
+ */
+#ifndef HAVE_JTAG_MINIDRIVER_H
+extern void jtag_add_callback4(jtag_callback_t, u8 *in, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3);
+#else
+/* implemented by minidriver */
+#endif
+
+
/* run a TAP_RESET reset. End state is TAP_RESET, regardless
* of start state.
*/
extern void jtag_add_tlr(void);
-extern int interface_jtag_add_tlr(void);
-/* Do not use jtag_add_pathmove() unless you need to, but do use it
+extern int interface_jtag_add_tlr(void);
+
+/* Application code *must* assume that interfaces will
+ * implement transitions between states with different
+ * paths and path lengths through the state diagram. The
+ * path will vary across interface and also across versions
+ * of the same interface over time. Even if the OpenOCD code
+ * is unchanged, the actual path taken may vary over time
+ * and versions of interface firmware or PCB revisions.
+ *
+ * Use jtag_add_pathmove() when specific transition sequences
+ * are required.
+ *
+ * Do not use jtag_add_pathmove() unless you need to, but do use it
* if you have to.
*
* DANGER! If the target is dependent upon a particular sequence
@@ -373,8 +704,9 @@ extern int interface_jtag_add_tlr(void);
* a partial implementation of pathmove would have little practical
* application.
*/
-extern void jtag_add_pathmove(int num_states, enum tap_state *path);
-extern int interface_jtag_add_pathmove(int num_states, enum tap_state *path);
+extern void jtag_add_pathmove(int num_states, tap_state_t* path);
+extern int interface_jtag_add_pathmove(int num_states, tap_state_t* path);
+
/* go to TAP_IDLE, if we're not already there and cycle
* precisely num_cycles in the TAP_IDLE after which move
* to the end state, if it is != TAP_IDLE
@@ -382,8 +714,9 @@ extern int interface_jtag_add_pathmove(int num_states, enum tap_state *path);
* nb! num_cycles can be 0, in which case the fn will navigate
* to endstate via TAP_IDLE
*/
-extern void jtag_add_runtest(int num_cycles, enum tap_state endstate);
-extern int interface_jtag_add_runtest(int num_cycles, enum tap_state endstate);
+extern void jtag_add_runtest(int num_cycles, tap_state_t endstate);
+extern int interface_jtag_add_runtest(int num_cycles, tap_state_t endstate);
+
/* A reset of the TAP state machine can be requested.
*
* Whether tms or trst reset is used depends on the capabilities of
@@ -407,6 +740,7 @@ extern int interface_jtag_add_runtest(int num_cycles, enum tap_state endstate);
* then trst & srst *must* be asserted together.
*/
extern void jtag_add_reset(int req_tlr_or_trst, int srst);
+
/* this drives the actual srst and trst pins. srst will always be 0
* if jtag_reset_config & RESET_SRST_PULLS_TRST != 0 and ditto for
* trst.
@@ -414,13 +748,21 @@ extern void jtag_add_reset(int req_tlr_or_trst, int srst);
* the higher level jtag_add_reset will invoke jtag_add_tlr() if
* approperiate
*/
-extern int interface_jtag_add_reset(int trst, int srst);
-extern void jtag_add_end_state(enum tap_state endstate);
-extern int interface_jtag_add_end_state(enum tap_state endstate);
+extern int interface_jtag_add_reset(int trst, int srst);
+extern void jtag_add_end_state(tap_state_t endstate);
+extern int interface_jtag_add_end_state(tap_state_t endstate);
extern void jtag_add_sleep(u32 us);
-extern int interface_jtag_add_sleep(u32 us);
+extern int interface_jtag_add_sleep(u32 us);
+/**
+ * Function jtag_add_stable_clocks
+ * first checks that the state in which the clocks are to be issued is
+ * stable, then queues up clock_count clocks for transmission.
+ */
+void jtag_add_clocks(int num_cycles);
+int interface_jtag_add_clocks(int num_cycles);
+
/*
* For software FIFO implementations, the queued commands can be executed
@@ -442,36 +784,68 @@ extern int interface_jtag_add_sleep(u32 us);
* jtag_add_xxx() commands can either be executed immediately or
* at some time between the jtag_add_xxx() fn call and jtag_execute_queue().
*/
-extern int jtag_execute_queue(void);
-/* can be implemented by hw+sw */
-extern int interface_jtag_execute_queue(void);
-extern int jtag_power_dropout(int *dropout);
-extern int jtag_srst_asserted(int *srst_asserted);
+extern int jtag_execute_queue(void);
+/* same as jtag_execute_queue() but does not clear the error flag */
+extern void jtag_execute_queue_noclear(void);
+
+/* this flag is set when an error occurs while executing the queue. cleared
+ * by jtag_execute_queue()
+ *
+ * this flag can also be set from application code if some error happens
+ * during processing that should be reported during jtag_execute_queue().
+ */
+extern int jtag_error;
+
+static __inline__ void jtag_set_error(int error)
+{
+ if ((error==ERROR_OK)||(jtag_error!=ERROR_OK))
+ {
+ /* keep first error */
+ return;
+ }
+ jtag_error=error;
+}
+
+
+
+/* can be implemented by hw+sw */
+extern int interface_jtag_execute_queue(void);
+extern int jtag_power_dropout(int* dropout);
+extern int jtag_srst_asserted(int* srst_asserted);
/* JTAG support functions */
-extern void jtag_set_check_value(scan_field_t *field, u8 *value, u8 *mask, error_handler_t *in_error_handler);
-extern enum scan_type jtag_scan_type(scan_command_t *cmd);
-extern int jtag_scan_size(scan_command_t *cmd);
-extern int jtag_read_buffer(u8 *buffer, scan_command_t *cmd);
-extern int jtag_build_buffer(scan_command_t *cmd, u8 **buffer);
+struct invalidstruct
+{
+
+};
+
+/* execute jtag queue and check value and use mask if mask is != NULL. invokes
+ * jtag_set_error() with any error. */
+extern void jtag_check_value_mask(scan_field_t *field, u8 *value, u8 *mask);
+extern enum scan_type jtag_scan_type(scan_command_t* cmd);
+extern int jtag_scan_size(scan_command_t* cmd);
+extern int jtag_read_buffer(u8* buffer, scan_command_t* cmd);
+extern int jtag_build_buffer(scan_command_t* cmd, u8** buffer);
-extern void jtag_sleep(u32 us);
-extern int jtag_call_event_callbacks(enum jtag_event event);
-extern int jtag_register_event_callback(int (*callback)(enum jtag_event event, void *priv), void *priv);
+extern void jtag_sleep(u32 us);
+extern int jtag_call_event_callbacks(enum jtag_event event);
+extern int jtag_register_event_callback(int (* callback)(enum jtag_event event, void* priv), void* priv);
extern int jtag_verify_capture_ir;
+void jtag_tap_handle_event(jtag_tap_t* tap, enum jtag_tap_event e);
+
/* error codes
* JTAG subsystem uses codes between -100 and -199 */
-#define ERROR_JTAG_INIT_FAILED (-100)
-#define ERROR_JTAG_INVALID_INTERFACE (-101)
-#define ERROR_JTAG_NOT_IMPLEMENTED (-102)
-#define ERROR_JTAG_TRST_ASSERTED (-103)
-#define ERROR_JTAG_QUEUE_FAILED (-104)
-#define ERROR_JTAG_DEVICE_ERROR (-107)
-
+#define ERROR_JTAG_INIT_FAILED (-100)
+#define ERROR_JTAG_INVALID_INTERFACE (-101)
+#define ERROR_JTAG_NOT_IMPLEMENTED (-102)
+#define ERROR_JTAG_TRST_ASSERTED (-103)
+#define ERROR_JTAG_QUEUE_FAILED (-104)
+#define ERROR_JTAG_NOT_STABLE_STATE (-105)
+#define ERROR_JTAG_DEVICE_ERROR (-107)
/* this allows JTAG devices to implement the entire jtag_xxx() layer in hw/sw */
@@ -481,9 +855,10 @@ extern int jtag_verify_capture_ir;
#define MINIDRIVER(a) notused ## a
#else
#define MINIDRIVER(a) a
+
/* jtag_add_dr_out() is a faster version of jtag_add_dr_scan()
*
- * Current or end_state can not be TAP_RESET. end_state can be -1
+ * Current or end_state can not be TAP_RESET. end_state can be TAP_INVALID
*
* num_bits[i] is the number of bits to clock out from value[i] LSB first.
*
@@ -498,25 +873,17 @@ extern int jtag_verify_capture_ir;
*
* Note that this jtag_add_dr_out can be defined as an inline function.
*/
-extern void interface_jtag_add_dr_out(jtag_tap_t *tap,
- int num_fields,
- const int *num_bits,
- const u32 *value,
- enum tap_state end_state);
-#endif
-
-
+extern void interface_jtag_add_dr_out(jtag_tap_t* tap, int num_fields, const int* num_bits, const u32* value,
+ tap_state_t end_state);
+#endif
-static __inline__ void jtag_add_dr_out(jtag_tap_t *tap,
- int num_fields,
- const int *num_bits,
- const u32 *value,
- enum tap_state end_state)
+static __inline__ void jtag_add_dr_out(jtag_tap_t* tap, int num_fields, const int* num_bits, const u32* value,
+ tap_state_t end_state)
{
- if (end_state != -1)
- cmd_queue_end_state=end_state;
- cmd_queue_cur_state=cmd_queue_end_state;
+ if (end_state != TAP_INVALID)
+ cmd_queue_end_state = end_state;
+ cmd_queue_cur_state = cmd_queue_end_state;
interface_jtag_add_dr_out(tap, num_fields, num_bits, value, cmd_queue_end_state);
}