X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fjtag%2Fdrivers%2Fstlink_usb.c;h=da1d1b56492c8d9eb0c7d518b7e5f976d3586247;hp=ffe4d684699d4152f899d0cce34db4af132a3ed3;hb=ee56c502607760deb1b44b4ab06b1cb3a59029fe;hpb=5babb634623d60dd8b39289de3ecf27910b0b86d diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c index ffe4d68469..da1d1b5649 100644 --- a/src/jtag/drivers/stlink_usb.c +++ b/src/jtag/drivers/stlink_usb.c @@ -31,16 +31,22 @@ /* project specific includes */ #include +#include #include #include #include #include #include +#include #include #include "libusb_common.h" +#ifdef HAVE_LIBUSB1 +#define USE_LIBUSB_ASYNCIO +#endif + #define ENDPOINT_IN 0x80 #define ENDPOINT_OUT 0x00 @@ -64,10 +70,18 @@ #define STLINK_V2_PID (0x3748) #define STLINK_V2_1_PID (0x374B) #define STLINK_V2_1_NO_MSD_PID (0x3752) +#define STLINK_V3_USBLOADER_PID (0x374D) +#define STLINK_V3E_PID (0x374E) +#define STLINK_V3S_PID (0x374F) +#define STLINK_V3_2VCP_PID (0x3753) -/* the current implementation of the stlink limits - * 8bit read/writes to max 64 bytes. */ +/* + * ST-Link/V1, ST-Link/V2 and ST-Link/V2.1 are full-speed USB devices and + * this limits the bulk packet size and the 8bit read/writes to max 64 bytes. + * STLINK-V3 is a high speed USB 2.0 and the limit is 512 bytes from FW V3J6. + */ #define STLINK_MAX_RW8 (64) +#define STLINKV3_MAX_RW8 (512) /* "WAIT" responses will be retried (with exponential backoff) at * most this many times before failing to caller. @@ -77,6 +91,7 @@ enum stlink_jtag_api_version { STLINK_JTAG_API_V1 = 1, STLINK_JTAG_API_V2, + STLINK_JTAG_API_V3, }; /** */ @@ -143,6 +158,7 @@ struct stlink_usb_handle_s { #define STLINK_SWD_AP_FAULT 0x11 #define STLINK_SWD_AP_ERROR 0x12 #define STLINK_SWD_AP_PARITY_ERROR 0x13 +#define STLINK_JTAG_GET_IDCODE_ERROR 0x09 #define STLINK_JTAG_WRITE_ERROR 0x0c #define STLINK_JTAG_WRITE_VERIF_ERROR 0x0d #define STLINK_SWD_DP_WAIT 0x14 @@ -154,6 +170,8 @@ struct stlink_usb_handle_s { #define STLINK_SWD_AP_STICKY_ERROR 0x19 #define STLINK_SWD_AP_STICKYORUN_ERROR 0x1a +#define STLINK_BAD_AP_ERROR 0x1d + #define STLINK_CORE_RUNNING 0x80 #define STLINK_CORE_HALTED 0x81 #define STLINK_CORE_STAT_UNKNOWN -1 @@ -249,17 +267,30 @@ struct stlink_usb_handle_s { #define STLINK_DEBUG_APIV2_GET_TRACE_NB 0x42 #define STLINK_DEBUG_APIV2_SWD_SET_FREQ 0x43 #define STLINK_DEBUG_APIV2_JTAG_SET_FREQ 0x44 - +#define STLINK_DEBUG_APIV2_READ_DAP_REG 0x45 +#define STLINK_DEBUG_APIV2_WRITE_DAP_REG 0x46 #define STLINK_DEBUG_APIV2_READMEM_16BIT 0x47 #define STLINK_DEBUG_APIV2_WRITEMEM_16BIT 0x48 +#define STLINK_DEBUG_APIV2_INIT_AP 0x4B +#define STLINK_DEBUG_APIV2_CLOSE_AP_DBG 0x4C + +#define STLINK_APIV3_SET_COM_FREQ 0x61 +#define STLINK_APIV3_GET_COM_FREQ 0x62 + +#define STLINK_APIV3_GET_VERSION_EX 0xFB + #define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00 #define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01 #define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02 +#define STLINK_DEBUG_PORT_ACCESS 0xffff + #define STLINK_TRACE_SIZE 4096 #define STLINK_TRACE_MAX_HZ 2000000 +#define STLINK_V3_MAX_FREQ_NB 10 + /** */ enum stlink_mode { STLINK_MODE_UNKNOWN = 0, @@ -277,11 +308,16 @@ enum stlink_mode { * Map the relevant features, quirks and workaround for specific firmware * version of stlink */ -#define STLINK_F_HAS_TRACE (1UL << 0) -#define STLINK_F_HAS_SWD_SET_FREQ (1UL << 1) -#define STLINK_F_HAS_JTAG_SET_FREQ (1UL << 2) -#define STLINK_F_HAS_MEM_16BIT (1UL << 3) -#define STLINK_F_HAS_GETLASTRWSTATUS2 (1UL << 4) +#define STLINK_F_HAS_TRACE BIT(0) +#define STLINK_F_HAS_SWD_SET_FREQ BIT(1) +#define STLINK_F_HAS_JTAG_SET_FREQ BIT(2) +#define STLINK_F_HAS_MEM_16BIT BIT(3) +#define STLINK_F_HAS_GETLASTRWSTATUS2 BIT(4) +#define STLINK_F_HAS_DAP_REG BIT(5) +#define STLINK_F_QUIRK_JTAG_DP_READ BIT(6) +#define STLINK_F_HAS_AP_INIT BIT(7) +#define STLINK_F_HAS_DPBANKSEL BIT(8) +#define STLINK_F_HAS_RW8_512BYTES BIT(9) /* aliases */ #define STLINK_F_HAS_TARGET_VOLT STLINK_F_HAS_TRACE @@ -321,19 +357,191 @@ static const struct speed_map stlink_khz_to_speed_map_jtag[] = { static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size); static int stlink_swim_status(void *handle); +void stlink_dump_speed_map(const struct speed_map *map, unsigned int map_size); +static int stlink_get_com_freq(void *handle, bool is_jtag, struct speed_map *map); +static int stlink_speed(void *handle, int khz, bool query); + +/** */ +static unsigned int stlink_usb_block(void *handle) +{ + struct stlink_usb_handle_s *h = handle; + + assert(handle != NULL); + + if (h->version.flags & STLINK_F_HAS_RW8_512BYTES) + return STLINKV3_MAX_RW8; + else + return STLINK_MAX_RW8; +} + + + +#ifdef USE_LIBUSB_ASYNCIO + +static LIBUSB_CALL void sync_transfer_cb(struct libusb_transfer *transfer) +{ + int *completed = transfer->user_data; + *completed = 1; + /* caller interprets result and frees transfer */ +} + + +static void sync_transfer_wait_for_completion(struct libusb_transfer *transfer) +{ + int r, *completed = transfer->user_data; + + /* Assuming a single libusb context exists. There no existing interface into this + * module to pass a libusb context. + */ + struct libusb_context *ctx = NULL; + + while (!*completed) { + r = libusb_handle_events_completed(ctx, completed); + if (r < 0) { + if (r == LIBUSB_ERROR_INTERRUPTED) + continue; + libusb_cancel_transfer(transfer); + continue; + } + } +} + + +static int transfer_error_status(const struct libusb_transfer *transfer) +{ + int r = 0; + + switch (transfer->status) { + case LIBUSB_TRANSFER_COMPLETED: + r = 0; + break; + case LIBUSB_TRANSFER_TIMED_OUT: + r = LIBUSB_ERROR_TIMEOUT; + break; + case LIBUSB_TRANSFER_STALL: + r = LIBUSB_ERROR_PIPE; + break; + case LIBUSB_TRANSFER_OVERFLOW: + r = LIBUSB_ERROR_OVERFLOW; + break; + case LIBUSB_TRANSFER_NO_DEVICE: + r = LIBUSB_ERROR_NO_DEVICE; + break; + case LIBUSB_TRANSFER_ERROR: + case LIBUSB_TRANSFER_CANCELLED: + r = LIBUSB_ERROR_IO; + break; + default: + r = LIBUSB_ERROR_OTHER; + break; + } + + return r; +} + +struct jtag_xfer { + int ep; + uint8_t *buf; + size_t size; + /* Internal */ + int retval; + int completed; + size_t transfer_size; + struct libusb_transfer *transfer; +}; + +static int jtag_libusb_bulk_transfer_n( + jtag_libusb_device_handle * dev_handle, + struct jtag_xfer *transfers, + size_t n_transfers, + int timeout) +{ + int retval = 0; + int returnval = ERROR_OK; + + + for (size_t i = 0; i < n_transfers; ++i) { + transfers[i].retval = 0; + transfers[i].completed = 0; + transfers[i].transfer_size = 0; + transfers[i].transfer = libusb_alloc_transfer(0); + + if (transfers[i].transfer == NULL) { + for (size_t j = 0; j < i; ++j) + libusb_free_transfer(transfers[j].transfer); + + LOG_DEBUG("ERROR, failed to alloc usb transfers"); + for (size_t k = 0; k < n_transfers; ++k) + transfers[k].retval = LIBUSB_ERROR_NO_MEM; + return ERROR_FAIL; + } + } + + for (size_t i = 0; i < n_transfers; ++i) { + libusb_fill_bulk_transfer( + transfers[i].transfer, + dev_handle, + transfers[i].ep, transfers[i].buf, transfers[i].size, + sync_transfer_cb, &transfers[i].completed, timeout); + transfers[i].transfer->type = LIBUSB_TRANSFER_TYPE_BULK; + + retval = libusb_submit_transfer(transfers[i].transfer); + if (retval < 0) { + LOG_DEBUG("ERROR, failed to submit transfer %zu, error %d", i, retval); + + /* Probably no point continuing to submit transfers once a submission fails. + * As a result, tag all remaining transfers as errors. + */ + for (size_t j = i; j < n_transfers; ++j) + transfers[j].retval = retval; + + returnval = ERROR_FAIL; + break; + } + } + + /* Wait for every submitted USB transfer to complete. + */ + for (size_t i = 0; i < n_transfers; ++i) { + if (transfers[i].retval == 0) { + sync_transfer_wait_for_completion(transfers[i].transfer); + + retval = transfer_error_status(transfers[i].transfer); + if (retval) { + returnval = ERROR_FAIL; + transfers[i].retval = retval; + LOG_DEBUG("ERROR, transfer %zu failed, error %d", i, retval); + } else { + /* Assuming actual_length is only valid if there is no transfer error. + */ + transfers[i].transfer_size = transfers[i].transfer->actual_length; + } + } + + libusb_free_transfer(transfers[i].transfer); + transfers[i].transfer = NULL; + } + + return returnval; +} + +#endif + /** */ static int stlink_usb_xfer_v1_get_status(void *handle) { struct stlink_usb_handle_s *h = handle; + int tr, ret; assert(handle != NULL); /* read status */ memset(h->cmdbuf, 0, STLINK_SG_SIZE); - if (jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)h->cmdbuf, - 13, STLINK_READ_TIMEOUT) != 13) + ret = jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)h->cmdbuf, 13, + STLINK_READ_TIMEOUT, &tr); + if (ret || tr != 13) return ERROR_FAIL; uint32_t t1; @@ -355,27 +563,68 @@ static int stlink_usb_xfer_v1_get_status(void *handle) return ERROR_OK; } -/** */ +#ifdef USE_LIBUSB_ASYNCIO static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); - if (jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)h->cmdbuf, cmdsize, - STLINK_WRITE_TIMEOUT) != cmdsize) { - return ERROR_FAIL; + size_t n_transfers = 0; + struct jtag_xfer transfers[2]; + + memset(transfers, 0, sizeof(transfers)); + + transfers[0].ep = h->tx_ep; + transfers[0].buf = h->cmdbuf; + transfers[0].size = cmdsize; + + ++n_transfers; + + if (h->direction == h->tx_ep && size) { + transfers[1].ep = h->tx_ep; + transfers[1].buf = (uint8_t *)buf; + transfers[1].size = size; + + ++n_transfers; + } else if (h->direction == h->rx_ep && size) { + transfers[1].ep = h->rx_ep; + transfers[1].buf = (uint8_t *)buf; + transfers[1].size = size; + + ++n_transfers; } + return jtag_libusb_bulk_transfer_n( + h->fd, + transfers, + n_transfers, + STLINK_WRITE_TIMEOUT); +} +#else +static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size) +{ + struct stlink_usb_handle_s *h = handle; + int tr, ret; + + assert(handle != NULL); + + ret = jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)h->cmdbuf, + cmdsize, STLINK_WRITE_TIMEOUT, &tr); + if (ret || tr != cmdsize) + return ERROR_FAIL; + if (h->direction == h->tx_ep && size) { - if (jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)buf, - size, STLINK_WRITE_TIMEOUT) != size) { + ret = jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)buf, + size, STLINK_WRITE_TIMEOUT, &tr); + if (ret || tr != size) { LOG_DEBUG("bulk write failed"); return ERROR_FAIL; } } else if (h->direction == h->rx_ep && size) { - if (jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)buf, - size, STLINK_READ_TIMEOUT) != size) { + ret = jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)buf, + size, STLINK_READ_TIMEOUT, &tr); + if (ret || tr != size) { LOG_DEBUG("bulk read failed"); return ERROR_FAIL; } @@ -383,6 +632,7 @@ static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int return ERROR_OK; } +#endif /** */ static int stlink_usb_xfer_v1_get_sense(void *handle) @@ -415,8 +665,9 @@ static int stlink_usb_xfer_v1_get_sense(void *handle) transfers block in cmdbuf indicates number of bytes in the following data phase. + Ignore the (eventual) error code in the received packet. */ -static int stlink_usb_xfer(void *handle, const uint8_t *buf, int size) +static int stlink_usb_xfer_noerrcheck(void *handle, const uint8_t *buf, int size) { int err, cmdsize = STLINK_CMD_SIZE_V2; struct stlink_usb_handle_s *h = handle; @@ -487,6 +738,9 @@ static int stlink_usb_error_check(void *handle) case STLINK_SWD_DP_WAIT: LOG_DEBUG("wait status SWD_DP_WAIT (0x%x)", STLINK_SWD_DP_WAIT); return ERROR_WAIT; + case STLINK_JTAG_GET_IDCODE_ERROR: + LOG_DEBUG("STLINK_JTAG_GET_IDCODE_ERROR"); + return ERROR_FAIL; case STLINK_JTAG_WRITE_ERROR: LOG_DEBUG("Write error"); return ERROR_FAIL; @@ -525,12 +779,31 @@ static int stlink_usb_error_check(void *handle) case STLINK_SWD_AP_STICKYORUN_ERROR: LOG_DEBUG("STLINK_SWD_AP_STICKYORUN_ERROR"); return ERROR_FAIL; + case STLINK_BAD_AP_ERROR: + LOG_DEBUG("STLINK_BAD_AP_ERROR"); + return ERROR_FAIL; default: LOG_DEBUG("unknown/unexpected STLINK status code 0x%x", h->databuf[0]); return ERROR_FAIL; } } +/* + * Wrapper around stlink_usb_xfer_noerrcheck() + * to check the error code in the received packet + */ +static int stlink_usb_xfer_errcheck(void *handle, const uint8_t *buf, int size) +{ + int retval; + + assert(size > 0); + + retval = stlink_usb_xfer_noerrcheck(handle, buf, size); + if (retval != ERROR_OK) + return retval; + + return stlink_usb_error_check(handle); +} /** Issue an STLINK command via USB transfer, with retries on any wait status responses. @@ -547,7 +820,7 @@ static int stlink_cmd_allow_retry(void *handle, const uint8_t *buf, int size) while (1) { if ((h->transport != HL_TRANSPORT_SWIM) || !retries) { - res = stlink_usb_xfer(handle, buf, size); + res = stlink_usb_xfer_noerrcheck(handle, buf, size); if (res != ERROR_OK) return res; } @@ -560,7 +833,9 @@ static int stlink_cmd_allow_retry(void *handle, const uint8_t *buf, int size) res = stlink_usb_error_check(handle); if (res == ERROR_WAIT && retries < MAX_WAIT_RETRIES) { - usleep((1<version.flags & STLINK_F_HAS_TRACE); - if (jtag_libusb_bulk_read(h->fd, h->trace_ep, (char *)buf, - size, STLINK_READ_TIMEOUT) != size) { + ret = jtag_libusb_bulk_read(h->fd, h->trace_ep, (char *)buf, size, + STLINK_READ_TIMEOUT, &tr); + if (ret || tr != size) { LOG_ERROR("bulk trace read failed"); return ERROR_FAIL; } @@ -638,8 +915,8 @@ static int stlink_usb_version(void *handle) int res; uint32_t flags; uint16_t version; - uint8_t v, x, y, jtag, swim, msd; - char v_str[4 * (1 + 3) + 1]; /* VvJjMmSs */ + uint8_t v, x, y, jtag, swim, msd, bridge = 0; + char v_str[5 * (1 + 3) + 1]; /* VvJjMmBbSs */ char *p; struct stlink_usb_handle_s *h = handle; @@ -649,7 +926,7 @@ static int stlink_usb_version(void *handle) h->cmdbuf[h->cmdidx++] = STLINK_GET_VERSION; - res = stlink_usb_xfer(handle, h->databuf, 6); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 6); if (res != ERROR_OK) return res; @@ -684,6 +961,25 @@ static int stlink_usb_version(void *handle) break; } + /* STLINK-V3 requires a specific command */ + if (v == 3 && x == 0 && y == 0) { + stlink_usb_init_buffer(handle, h->rx_ep, 16); + + h->cmdbuf[h->cmdidx++] = STLINK_APIV3_GET_VERSION_EX; + + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 12); + if (res != ERROR_OK) + return res; + + v = h->databuf[0]; + swim = h->databuf[1]; + jtag = h->databuf[2]; + msd = h->databuf[3]; + bridge = h->databuf[4]; + h->vid = le_to_h_u16(h->databuf + 8); + h->pid = le_to_h_u16(h->databuf + 10); + } + h->version.stlink = v; h->version.jtag = jtag; h->version.swim = swim; @@ -716,13 +1012,59 @@ static int stlink_usb_version(void *handle) flags |= STLINK_F_HAS_SWD_SET_FREQ; /* API to set JTAG frequency from J24 */ - if (h->version.jtag >= 24) + /* API to access DAP registers from J24 */ + if (h->version.jtag >= 24) { flags |= STLINK_F_HAS_JTAG_SET_FREQ; + flags |= STLINK_F_HAS_DAP_REG; + } + + /* Quirk for read DP in JTAG mode (V2 only) from J24, fixed in J32 */ + if (h->version.jtag >= 24 && h->version.jtag < 32) + flags |= STLINK_F_QUIRK_JTAG_DP_READ; /* API to read/write memory at 16 bit from J26 */ if (h->version.jtag >= 26) flags |= STLINK_F_HAS_MEM_16BIT; + /* API required to init AP before any AP access from J28 */ + if (h->version.jtag >= 28) + flags |= STLINK_F_HAS_AP_INIT; + + /* Banked regs (DPv1 & DPv2) support from V2J32 */ + if (h->version.jtag >= 32) + flags |= STLINK_F_HAS_DPBANKSEL; + + break; + case 3: + /* all STLINK-V3 use api-v3 */ + h->version.jtag_api = STLINK_JTAG_API_V3; + + /* STLINK-V3 is a superset of ST-LINK/V2 */ + + /* API for trace */ + /* API for target voltage */ + flags |= STLINK_F_HAS_TRACE; + + /* preferred API to get last R/W status */ + flags |= STLINK_F_HAS_GETLASTRWSTATUS2; + + /* API to access DAP registers */ + flags |= STLINK_F_HAS_DAP_REG; + + /* API to read/write memory at 16 bit */ + flags |= STLINK_F_HAS_MEM_16BIT; + + /* API required to init AP before any AP access */ + flags |= STLINK_F_HAS_AP_INIT; + + /* Banked regs (DPv1 & DPv2) support from V3J2 */ + if (h->version.jtag >= 2) + flags |= STLINK_F_HAS_DPBANKSEL; + + /* 8bit read/write max packet size 512 bytes from V3J6 */ + if (h->version.jtag >= 6) + flags |= STLINK_F_HAS_RW8_512BYTES; + break; default: break; @@ -735,8 +1077,10 @@ static int stlink_usb_version(void *handle) p += sprintf(p, "J%d", jtag); if (msd) p += sprintf(p, "M%d", msd); + if (bridge) + p += sprintf(p, "B%d", bridge); if (swim || !msd) - p += sprintf(p, "S%d", swim); + sprintf(p, "S%d", swim); LOG_INFO("STLINK %s (API v%d) VID:PID %04X:%04X", v_str, @@ -760,7 +1104,7 @@ static int stlink_usb_check_voltage(void *handle, float *target_voltage) h->cmdbuf[h->cmdidx++] = STLINK_GET_TARGET_VOLTAGE; - int result = stlink_usb_xfer(handle, h->databuf, 8); + int result = stlink_usb_xfer_noerrcheck(handle, h->databuf, 8); if (result != ERROR_OK) return result; @@ -839,7 +1183,7 @@ static int stlink_usb_current_mode(void *handle, uint8_t *mode) h->cmdbuf[h->cmdidx++] = STLINK_GET_CURRENT_MODE; - res = stlink_usb_xfer(handle, h->databuf, 2); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2); if (res != ERROR_OK) return res; @@ -861,7 +1205,7 @@ static int stlink_usb_mode_enter(void *handle, enum stlink_mode type) * status * TODO: we need the test on api V1 too */ - if (h->version.jtag_api == STLINK_JTAG_API_V2) + if (h->version.jtag_api != STLINK_JTAG_API_V1) rx_size = 2; stlink_usb_init_buffer(handle, h->rx_ep, rx_size); @@ -927,7 +1271,7 @@ static int stlink_usb_mode_leave(void *handle, enum stlink_mode type) return ERROR_FAIL; } - res = stlink_usb_xfer(handle, 0, 0); + res = stlink_usb_xfer_noerrcheck(handle, 0, 0); if (res != ERROR_OK) return res; @@ -952,7 +1296,7 @@ static enum stlink_mode stlink_get_mode(enum hl_transports t) } /** */ -static int stlink_usb_init_mode(void *handle, bool connect_under_reset) +static int stlink_usb_init_mode(void *handle, bool connect_under_reset, int initial_interface_speed) { int res; uint8_t mode; @@ -1031,6 +1375,27 @@ static int stlink_usb_init_mode(void *handle, bool connect_under_reset) return ERROR_FAIL; } + /* set the speed before entering the mode, as the chip discovery phase should be done at this speed too */ + if (h->transport == HL_TRANSPORT_JTAG) { + if (h->version.flags & STLINK_F_HAS_JTAG_SET_FREQ) { + stlink_dump_speed_map(stlink_khz_to_speed_map_jtag, ARRAY_SIZE(stlink_khz_to_speed_map_jtag)); + stlink_speed(h, initial_interface_speed, false); + } + } else if (h->transport == HL_TRANSPORT_SWD) { + if (h->version.flags & STLINK_F_HAS_SWD_SET_FREQ) { + stlink_dump_speed_map(stlink_khz_to_speed_map_swd, ARRAY_SIZE(stlink_khz_to_speed_map_swd)); + stlink_speed(h, initial_interface_speed, false); + } + } + + if (h->version.jtag_api == STLINK_JTAG_API_V3) { + struct speed_map map[STLINK_V3_MAX_FREQ_NB]; + + stlink_get_com_freq(h, (h->transport == HL_TRANSPORT_JTAG), map); + stlink_dump_speed_map(map, ARRAY_SIZE(map)); + stlink_speed(h, initial_interface_speed, false); + } + /* preliminary SRST assert: * We want SRST is asserted before activating debug signals (mode_enter). * As the required mode has not been set, the adapter may not know what pin to use. @@ -1073,7 +1438,8 @@ static int stlink_swim_status(void *handle) stlink_usb_init_buffer(handle, h->rx_ep, 4); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READSTATUS; - res = stlink_usb_xfer(handle, h->databuf, 4); + /* error is checked by the caller */ + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4); if (res != ERROR_OK) return res; return ERROR_OK; @@ -1093,7 +1459,7 @@ static int stlink_swim_cap(void *handle, uint8_t *cap) h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READ_CAP; h->cmdbuf[h->cmdidx++] = 0x01; - res = stlink_usb_xfer(handle, h->databuf, 8); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 8); if (res != ERROR_OK) return res; memcpy(cap, h->databuf, 8); @@ -1250,7 +1616,7 @@ static int stlink_swim_readbytes(void *handle, uint32_t addr, uint32_t len, uint stlink_usb_init_buffer(handle, h->rx_ep, len); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READBUF; - res = stlink_usb_xfer(handle, data, len); + res = stlink_usb_xfer_noerrcheck(handle, data, len); if (res != ERROR_OK) return res; @@ -1260,7 +1626,7 @@ static int stlink_swim_readbytes(void *handle, uint32_t addr, uint32_t len, uint /** */ static int stlink_usb_idcode(void *handle, uint32_t *idcode) { - int res; + int res, offset; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); @@ -1271,17 +1637,25 @@ static int stlink_usb_idcode(void *handle, uint32_t *idcode) return ERROR_OK; } - stlink_usb_init_buffer(handle, h->rx_ep, 4); + stlink_usb_init_buffer(handle, h->rx_ep, 12); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; - h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READCOREID; + if (h->version.jtag_api == STLINK_JTAG_API_V1) { + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READCOREID; + + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4); + offset = 0; + } else { + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READ_IDCODES; - res = stlink_usb_xfer(handle, h->databuf, 4); + res = stlink_usb_xfer_errcheck(handle, h->databuf, 12); + offset = 4; + } if (res != ERROR_OK) return res; - *idcode = le_to_h_u32(h->databuf); + *idcode = le_to_h_u32(h->databuf + offset); LOG_DEBUG("IDCODE: 0x%08" PRIX32, *idcode); @@ -1346,7 +1720,7 @@ static int stlink_usb_trace_read(void *handle, uint8_t *buf, size_t *size) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GET_TRACE_NB; - res = stlink_usb_xfer(handle, h->databuf, 2); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2); if (res != ERROR_OK) return res; @@ -1411,7 +1785,7 @@ static enum target_state stlink_usb_state(void *handle) h->reconnect_pending = false; } - if (h->version.jtag_api == STLINK_JTAG_API_V2) { + if (h->version.jtag_api != STLINK_JTAG_API_V1) { res = stlink_usb_v2_get_status(handle); if (res == TARGET_UNKNOWN) h->reconnect_pending = true; @@ -1423,7 +1797,7 @@ static enum target_state stlink_usb_state(void *handle) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_GETSTATUS; - res = stlink_usb_xfer(handle, h->databuf, 2); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2); if (res != ERROR_OK) return TARGET_UNKNOWN; @@ -1474,7 +1848,7 @@ static void stlink_usb_trace_disable(void *handle) stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_STOP_TRACE_RX; - res = stlink_usb_xfer(handle, h->databuf, 2); + res = stlink_usb_xfer_errcheck(handle, h->databuf, 2); if (res == ERROR_OK) h->trace.enabled = false; @@ -1499,7 +1873,7 @@ static int stlink_usb_trace_enable(void *handle) h_u32_to_le(h->cmdbuf+h->cmdidx, h->trace.source_hz); h->cmdidx += 4; - res = stlink_usb_xfer(handle, h->databuf, 2); + res = stlink_usb_xfer_errcheck(handle, h->databuf, 2); if (res == ERROR_OK) { h->trace.enabled = true; @@ -1553,7 +1927,7 @@ static int stlink_usb_run(void *handle) assert(handle != NULL); - if (h->version.jtag_api == STLINK_JTAG_API_V2) { + if (h->version.jtag_api != STLINK_JTAG_API_V1) { res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN); return res; @@ -1575,7 +1949,7 @@ static int stlink_usb_halt(void *handle) assert(handle != NULL); - if (h->version.jtag_api == STLINK_JTAG_API_V2) { + if (h->version.jtag_api != STLINK_JTAG_API_V1) { res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN); return res; @@ -1596,7 +1970,7 @@ static int stlink_usb_step(void *handle) assert(handle != NULL); - if (h->version.jtag_api == STLINK_JTAG_API_V2) { + if (h->version.jtag_api != STLINK_JTAG_API_V1) { /* TODO: this emulates the v1 api, it should really use a similar auto mask isr * that the Cortex-M3 currently does. */ stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN); @@ -1620,20 +1994,21 @@ static int stlink_usb_read_regs(void *handle) assert(handle != NULL); - stlink_usb_init_buffer(handle, h->rx_ep, 84); + stlink_usb_init_buffer(handle, h->rx_ep, 88); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; - if (h->version.jtag_api == STLINK_JTAG_API_V1) + if (h->version.jtag_api == STLINK_JTAG_API_V1) { + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READALLREGS; - else + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 84); + /* regs data from offset 0 */ + } else { h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READALLREGS; + res = stlink_usb_xfer_errcheck(handle, h->databuf, 88); + /* status at offset 0, regs data from offset 4 */ + } - res = stlink_usb_xfer(handle, h->databuf, 84); - - if (res != ERROR_OK) - return res; - - return ERROR_OK; + return res; } /** */ @@ -1654,7 +2029,7 @@ static int stlink_usb_read_reg(void *handle, int num, uint32_t *val) h->cmdbuf[h->cmdidx++] = num; if (h->version.jtag_api == STLINK_JTAG_API_V1) { - res = stlink_usb_xfer(handle, h->databuf, 4); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4); if (res != ERROR_OK) return res; *val = le_to_h_u32(h->databuf); @@ -1691,7 +2066,6 @@ static int stlink_usb_write_reg(void *handle, int num, uint32_t val) static int stlink_usb_get_rw_status(void *handle) { - int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); @@ -1704,18 +2078,11 @@ static int stlink_usb_get_rw_status(void *handle) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; if (h->version.flags & STLINK_F_HAS_GETLASTRWSTATUS2) { h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS2; - - res = stlink_usb_xfer(handle, h->databuf, 12); + return stlink_usb_xfer_errcheck(handle, h->databuf, 12); } else { h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS; - - res = stlink_usb_xfer(handle, h->databuf, 2); + return stlink_usb_xfer_errcheck(handle, h->databuf, 2); } - - if (res != ERROR_OK) - return res; - - return stlink_usb_error_check(h); } /** */ @@ -1728,9 +2095,9 @@ static int stlink_usb_read_mem8(void *handle, uint32_t addr, uint16_t len, assert(handle != NULL); - /* max 8bit read/write is 64bytes */ - if (len > STLINK_MAX_RW8) { - LOG_DEBUG("max buffer length exceeded"); + /* max 8 bit read/write is 64 bytes or 512 bytes for v3 */ + if (len > stlink_usb_block(h)) { + LOG_DEBUG("max buffer (%d) length exceeded", stlink_usb_block(h)); return ERROR_FAIL; } @@ -1747,7 +2114,7 @@ static int stlink_usb_read_mem8(void *handle, uint32_t addr, uint16_t len, if (read_len == 1) read_len++; - res = stlink_usb_xfer(handle, h->databuf, read_len); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, read_len); if (res != ERROR_OK) return res; @@ -1766,9 +2133,9 @@ static int stlink_usb_write_mem8(void *handle, uint32_t addr, uint16_t len, assert(handle != NULL); - /* max 8bit read/write is 64bytes */ - if (len > STLINK_MAX_RW8) { - LOG_DEBUG("max buffer length exceeded"); + /* max 8 bit read/write is 64 bytes or 512 bytes for v3 */ + if (len > stlink_usb_block(h)) { + LOG_DEBUG("max buffer length (%d) exceeded", stlink_usb_block(h)); return ERROR_FAIL; } @@ -1781,7 +2148,7 @@ static int stlink_usb_write_mem8(void *handle, uint32_t addr, uint16_t len, h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; - res = stlink_usb_xfer(handle, buffer, len); + res = stlink_usb_xfer_noerrcheck(handle, buffer, len); if (res != ERROR_OK) return res; @@ -1816,7 +2183,7 @@ static int stlink_usb_read_mem16(void *handle, uint32_t addr, uint16_t len, h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; - res = stlink_usb_xfer(handle, h->databuf, len); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, len); if (res != ERROR_OK) return res; @@ -1853,7 +2220,7 @@ static int stlink_usb_write_mem16(void *handle, uint32_t addr, uint16_t len, h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; - res = stlink_usb_xfer(handle, buffer, len); + res = stlink_usb_xfer_noerrcheck(handle, buffer, len); if (res != ERROR_OK) return res; @@ -1885,7 +2252,7 @@ static int stlink_usb_read_mem32(void *handle, uint32_t addr, uint16_t len, h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; - res = stlink_usb_xfer(handle, h->databuf, len); + res = stlink_usb_xfer_noerrcheck(handle, h->databuf, len); if (res != ERROR_OK) return res; @@ -1919,7 +2286,7 @@ static int stlink_usb_write_mem32(void *handle, uint32_t addr, uint16_t len, h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; - res = stlink_usb_xfer(handle, buffer, len); + res = stlink_usb_xfer_noerrcheck(handle, buffer, len); if (res != ERROR_OK) return res; @@ -1953,7 +2320,7 @@ static int stlink_usb_read_mem(void *handle, uint32_t addr, uint32_t size, while (count) { bytes_remaining = (size != 1) ? \ - stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8; + stlink_max_block_size(h->max_mem_packet, addr) : stlink_usb_block(h); if (count < bytes_remaining) bytes_remaining = count; @@ -2038,7 +2405,7 @@ static int stlink_usb_write_mem(void *handle, uint32_t addr, uint32_t size, while (count) { bytes_remaining = (size != 1) ? \ - stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8; + stlink_max_block_size(h->max_mem_packet, addr) : stlink_usb_block(h); if (count < bytes_remaining) bytes_remaining = count; @@ -2131,9 +2498,13 @@ static int stlink_match_speed_map(const struct speed_map *map, unsigned int map_ unsigned int i; int speed_index = -1; int speed_diff = INT_MAX; + int last_valid_speed = -1; bool match = true; for (i = 0; i < map_size; i++) { + if (!map[i].speed) + continue; + last_valid_speed = i; if (khz == map[i].speed) { speed_index = i; break; @@ -2151,7 +2522,7 @@ static int stlink_match_speed_map(const struct speed_map *map, unsigned int map_ if (speed_index == -1) { /* this will only be here if we cannot match the slow speed. * use the slowest speed we support.*/ - speed_index = map_size - 1; + speed_index = last_valid_speed; match = false; } else if (i == map_size) match = false; @@ -2216,7 +2587,84 @@ void stlink_dump_speed_map(const struct speed_map *map, unsigned int map_size) LOG_DEBUG("Supported clock speeds are:"); for (i = 0; i < map_size; i++) - LOG_DEBUG("%d kHz", map[i].speed); + if (map[i].speed) + LOG_DEBUG("%d kHz", map[i].speed); +} + +static int stlink_get_com_freq(void *handle, bool is_jtag, struct speed_map *map) +{ + struct stlink_usb_handle_s *h = handle; + int i; + + if (h->version.jtag_api != STLINK_JTAG_API_V3) { + LOG_ERROR("Unknown command"); + return 0; + } + + stlink_usb_init_buffer(handle, h->rx_ep, 16); + + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_APIV3_GET_COM_FREQ; + h->cmdbuf[h->cmdidx++] = is_jtag ? 1 : 0; + + int res = stlink_usb_xfer_errcheck(handle, h->databuf, 52); + + int size = h->databuf[8]; + + if (size > STLINK_V3_MAX_FREQ_NB) + size = STLINK_V3_MAX_FREQ_NB; + + for (i = 0; i < size; i++) { + map[i].speed = le_to_h_u32(&h->databuf[12 + 4 * i]); + map[i].speed_divisor = i; + } + + /* set to zero all the next entries */ + for (i = size; i < STLINK_V3_MAX_FREQ_NB; i++) + map[i].speed = 0; + + return res; +} + +static int stlink_set_com_freq(void *handle, bool is_jtag, unsigned int frequency) +{ + struct stlink_usb_handle_s *h = handle; + + if (h->version.jtag_api != STLINK_JTAG_API_V3) { + LOG_ERROR("Unknown command"); + return 0; + } + + stlink_usb_init_buffer(handle, h->rx_ep, 16); + + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_APIV3_SET_COM_FREQ; + h->cmdbuf[h->cmdidx++] = is_jtag ? 1 : 0; + h->cmdbuf[h->cmdidx++] = 0; + + h_u32_to_le(&h->cmdbuf[4], frequency); + + return stlink_usb_xfer_errcheck(handle, h->databuf, 8); +} + +static int stlink_speed_v3(void *handle, bool is_jtag, int khz, bool query) +{ + struct stlink_usb_handle_s *h = handle; + int speed_index; + struct speed_map map[STLINK_V3_MAX_FREQ_NB]; + + stlink_get_com_freq(h, is_jtag, map); + + speed_index = stlink_match_speed_map(map, ARRAY_SIZE(map), khz, query); + + if (!query) { + int result = stlink_set_com_freq(h, is_jtag, map[speed_index].speed); + if (result != ERROR_OK) { + LOG_ERROR("Unable to set adapter speed"); + return khz; + } + } + return map[speed_index].speed; } static int stlink_speed(void *handle, int khz, bool query) @@ -2226,12 +2674,25 @@ static int stlink_speed(void *handle, int khz, bool query) if (!handle) return khz; - if (h->transport == HL_TRANSPORT_SWIM) + switch (h->transport) { + case HL_TRANSPORT_SWIM: return stlink_speed_swim(handle, khz, query); - else if (h->transport == HL_TRANSPORT_SWD) - return stlink_speed_swd(handle, khz, query); - else if (h->transport == HL_TRANSPORT_JTAG) - return stlink_speed_jtag(handle, khz, query); + break; + case HL_TRANSPORT_SWD: + if (h->version.jtag_api == STLINK_JTAG_API_V3) + return stlink_speed_v3(handle, false, khz, query); + else + return stlink_speed_swd(handle, khz, query); + break; + case HL_TRANSPORT_JTAG: + if (h->version.jtag_api == STLINK_JTAG_API_V3) + return stlink_speed_v3(handle, true, khz, query); + else + return stlink_speed_jtag(handle, khz, query); + break; + default: + break; + } return khz; } @@ -2344,6 +2805,14 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd) h->version.stlink = 1; h->tx_ep = STLINK_TX_EP; break; + case STLINK_V3_USBLOADER_PID: + case STLINK_V3E_PID: + case STLINK_V3S_PID: + case STLINK_V3_2VCP_PID: + h->version.stlink = 3; + h->tx_ep = STLINK_V2_1_TX_EP; + h->trace_ep = STLINK_V2_1_TRACE_EP; + break; case STLINK_V2_1_PID: case STLINK_V2_1_NO_MSD_PID: h->version.stlink = 2; @@ -2418,7 +2887,7 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd) } /* initialize the debug hardware */ - err = stlink_usb_init_mode(h, param->connect_under_reset); + err = stlink_usb_init_mode(h, param->connect_under_reset, param->initial_interface_speed); if (err != ERROR_OK) { LOG_ERROR("init mode failed (unable to connect to the target)"); @@ -2436,18 +2905,6 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd) return ERROR_OK; } - if (h->transport == HL_TRANSPORT_JTAG) { - if (h->version.flags & STLINK_F_HAS_JTAG_SET_FREQ) { - stlink_dump_speed_map(stlink_khz_to_speed_map_jtag, ARRAY_SIZE(stlink_khz_to_speed_map_jtag)); - stlink_speed(h, param->initial_interface_speed, false); - } - } else if (h->transport == HL_TRANSPORT_SWD) { - if (h->version.flags & STLINK_F_HAS_SWD_SET_FREQ) { - stlink_dump_speed_map(stlink_khz_to_speed_map_swd, ARRAY_SIZE(stlink_khz_to_speed_map_swd)); - stlink_speed(h, param->initial_interface_speed, false); - } - } - /* get cpuid, so we can determine the max page size * start with a safe default */ h->max_mem_packet = (1 << 10); @@ -2475,10 +2932,13 @@ error_open: return ERROR_FAIL; } -int stlink_config_trace(void *handle, bool enabled, enum tpiu_pin_protocol pin_protocol, - uint32_t port_size, unsigned int *trace_freq) +int stlink_config_trace(void *handle, bool enabled, + enum tpiu_pin_protocol pin_protocol, uint32_t port_size, + unsigned int *trace_freq, unsigned int traceclkin_freq, + uint16_t *prescaler) { struct stlink_usb_handle_s *h = handle; + uint16_t presc; if (enabled && (!(h->version.flags & STLINK_F_HAS_TRACE) || pin_protocol != TPIU_PIN_PROTOCOL_ASYNC_UART)) { @@ -2501,18 +2961,114 @@ int stlink_config_trace(void *handle, bool enabled, enum tpiu_pin_protocol pin_p if (!*trace_freq) *trace_freq = STLINK_TRACE_MAX_HZ; + + presc = traceclkin_freq / *trace_freq; + + if (traceclkin_freq % *trace_freq > 0) + presc++; + + if (presc > TPIU_ACPR_MAX_SWOSCALER) { + LOG_ERROR("SWO frequency is not suitable. Please choose a different " + "frequency."); + return ERROR_FAIL; + } + + *prescaler = presc; h->trace.source_hz = *trace_freq; return stlink_usb_trace_enable(h); } /** */ -struct hl_layout_api_s stlink_usb_layout_api = { - /** */ - .open = stlink_usb_open, - /** */ - .close = stlink_usb_close, - /** */ +static int stlink_usb_init_access_port(void *handle, unsigned char ap_num) +{ + struct stlink_usb_handle_s *h = handle; + + assert(handle != NULL); + + if (!(h->version.flags & STLINK_F_HAS_AP_INIT)) + return ERROR_COMMAND_NOTFOUND; + + LOG_DEBUG_IO("init ap_num = %d", ap_num); + stlink_usb_init_buffer(handle, h->rx_ep, 16); + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_INIT_AP; + h->cmdbuf[h->cmdidx++] = ap_num; + + return stlink_usb_xfer_errcheck(handle, h->databuf, 2); +} + +/** */ +static int stlink_usb_close_access_port(void *handle, unsigned char ap_num) +{ + struct stlink_usb_handle_s *h = handle; + + assert(handle != NULL); + + if (!(h->version.flags & STLINK_F_HAS_AP_INIT)) + return ERROR_COMMAND_NOTFOUND; + + LOG_DEBUG_IO("close ap_num = %d", ap_num); + stlink_usb_init_buffer(handle, h->rx_ep, 16); + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_CLOSE_AP_DBG; + h->cmdbuf[h->cmdidx++] = ap_num; + + return stlink_usb_xfer_errcheck(handle, h->databuf, 2); +} + +/** */ +static int stlink_read_dap_register(void *handle, unsigned short dap_port, + unsigned short addr, uint32_t *val) +{ + struct stlink_usb_handle_s *h = handle; + int retval; + + assert(handle != NULL); + + if (!(h->version.flags & STLINK_F_HAS_DAP_REG)) + return ERROR_COMMAND_NOTFOUND; + + stlink_usb_init_buffer(handle, h->rx_ep, 16); + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READ_DAP_REG; + h_u16_to_le(&h->cmdbuf[2], dap_port); + h_u16_to_le(&h->cmdbuf[4], addr); + + retval = stlink_usb_xfer_errcheck(handle, h->databuf, 8); + *val = le_to_h_u32(h->databuf + 4); + LOG_DEBUG_IO("dap_port_read = %d, addr = 0x%x, value = 0x%x", dap_port, addr, *val); + return retval; +} + +/** */ +static int stlink_write_dap_register(void *handle, unsigned short dap_port, + unsigned short addr, uint32_t val) +{ + struct stlink_usb_handle_s *h = handle; + + assert(handle != NULL); + + if (!(h->version.flags & STLINK_F_HAS_DAP_REG)) + return ERROR_COMMAND_NOTFOUND; + + LOG_DEBUG_IO("dap_write port = %d, addr = 0x%x, value = 0x%x", dap_port, addr, val); + stlink_usb_init_buffer(handle, h->rx_ep, 16); + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITE_DAP_REG; + h_u16_to_le(&h->cmdbuf[2], dap_port); + h_u16_to_le(&h->cmdbuf[4], addr); + h_u32_to_le(&h->cmdbuf[6], val); + return stlink_usb_xfer_errcheck(handle, h->databuf, 2); +} + +/** */ +struct hl_layout_api_s stlink_usb_layout_api = { + /** */ + .open = stlink_usb_open, + /** */ + .close = stlink_usb_close, + /** */ .idcode = stlink_usb_idcode, /** */ .state = stlink_usb_state, @@ -2547,3 +3103,566 @@ struct hl_layout_api_s stlink_usb_layout_api = { /** */ .poll_trace = stlink_usb_trace_read, }; + +/***************************************************************************** + * DAP direct interface + */ + +static struct stlink_usb_handle_s *stlink_dap_handle; +static struct hl_interface_param_s stlink_dap_param; +static DECLARE_BITMAP(opened_ap, DP_APSEL_MAX + 1); +static int stlink_dap_error = ERROR_OK; + +static int stlink_dap_op_queue_dp_read(struct adiv5_dap *dap, unsigned reg, + uint32_t *data); + +/** */ +static int stlink_dap_record_error(int error) +{ + if (stlink_dap_error == ERROR_OK) + stlink_dap_error = error; + return ERROR_OK; +} + +/** */ +static int stlink_dap_get_and_clear_error(void) +{ + int retval = stlink_dap_error; + stlink_dap_error = ERROR_OK; + return retval; +} + +/** */ +static int stlink_dap_open_ap(unsigned short apsel) +{ + int retval; + + /* nothing to do on old versions */ + if (!(stlink_dap_handle->version.flags & STLINK_F_HAS_AP_INIT)) + return ERROR_OK; + + if (apsel > DP_APSEL_MAX) + return ERROR_FAIL; + + if (test_bit(apsel, opened_ap)) + return ERROR_OK; + + retval = stlink_usb_init_access_port(stlink_dap_handle, apsel); + if (retval != ERROR_OK) + return retval; + + LOG_DEBUG("AP %d enabled", apsel); + set_bit(apsel, opened_ap); + return ERROR_OK; +} + +/** */ +static int stlink_dap_closeall_ap(void) +{ + int retval, apsel; + + /* nothing to do on old versions */ + if (!(stlink_dap_handle->version.flags & STLINK_F_HAS_AP_INIT)) + return ERROR_OK; + + for (apsel = 0; apsel <= DP_APSEL_MAX; apsel++) { + if (!test_bit(apsel, opened_ap)) + continue; + retval = stlink_usb_close_access_port(stlink_dap_handle, apsel); + if (retval != ERROR_OK) + return retval; + clear_bit(apsel, opened_ap); + } + return ERROR_OK; +} + +/** */ +static int stlink_dap_reinit_interface(void) +{ + int retval; + enum stlink_mode mode; + + /* + * On JTAG only, it should be enough to call stlink_usb_reset(). But on + * some firmware version it does not work as expected, and there is no + * equivalent for SWD. + * At least for now, to reset the interface quit from JTAG/SWD mode then + * select the mode again. + */ + + mode = stlink_get_mode(stlink_dap_param.transport); + if (!stlink_dap_handle->reconnect_pending) { + stlink_dap_handle->reconnect_pending = true; + stlink_usb_mode_leave(stlink_dap_handle, mode); + } + + retval = stlink_usb_mode_enter(stlink_dap_handle, mode); + if (retval != ERROR_OK) + return retval; + + stlink_dap_handle->reconnect_pending = false; + /* on new FW, calling mode-leave closes all the opened AP; reopen them! */ + if (stlink_dap_handle->version.flags & STLINK_F_HAS_AP_INIT) + for (int apsel = 0; apsel <= DP_APSEL_MAX; apsel++) + if (test_bit(apsel, opened_ap)) { + clear_bit(apsel, opened_ap); + stlink_dap_open_ap(apsel); + } + return ERROR_OK; +} + +/** */ +static int stlink_dap_op_connect(struct adiv5_dap *dap) +{ + uint32_t idcode; + int retval; + + LOG_INFO("stlink_dap_op_connect(%sconnect)", dap->do_reconnect ? "re" : ""); + + /* Check if we should reset srst already when connecting, but not if reconnecting. */ + if (!dap->do_reconnect) { + enum reset_types jtag_reset_config = jtag_get_reset_config(); + + if (jtag_reset_config & RESET_CNCT_UNDER_SRST) { + if (jtag_reset_config & RESET_SRST_NO_GATING) + adapter_assert_reset(); + else + LOG_WARNING("\'srst_nogate\' reset_config option is required"); + } + } + + dap->do_reconnect = false; + dap_invalidate_cache(dap); + + retval = dap_dp_init(dap); + if (retval != ERROR_OK) { + dap->do_reconnect = true; + return retval; + } + + retval = stlink_usb_idcode(stlink_dap_handle, &idcode); + if (retval == ERROR_OK) + LOG_INFO("%s %#8.8" PRIx32, + (stlink_dap_handle->transport == HL_TRANSPORT_JTAG) ? "JTAG IDCODE" : "SWD DPIDR", + idcode); + else + dap->do_reconnect = true; + + return retval; +} + +/** */ +static int stlink_dap_check_reconnect(struct adiv5_dap *dap) +{ + int retval; + + if (!dap->do_reconnect) + return ERROR_OK; + + retval = stlink_dap_reinit_interface(); + if (retval != ERROR_OK) + return retval; + + return stlink_dap_op_connect(dap); +} + +/** */ +static int stlink_dap_op_send_sequence(struct adiv5_dap *dap, enum swd_special_seq seq) +{ + /* Ignore the request */ + return ERROR_OK; +} + +/** */ +static int stlink_dap_op_queue_dp_read(struct adiv5_dap *dap, unsigned reg, + uint32_t *data) +{ + uint32_t dummy; + int retval; + + if (!(stlink_dap_handle->version.flags & STLINK_F_HAS_DPBANKSEL)) + if (reg & 0x000000F0) { + LOG_ERROR("Banked DP registers not supported in current STLink FW"); + return ERROR_COMMAND_NOTFOUND; + } + + retval = stlink_dap_check_reconnect(dap); + if (retval != ERROR_OK) + return retval; + + data = data ? : &dummy; + if (stlink_dap_handle->version.flags & STLINK_F_QUIRK_JTAG_DP_READ + && stlink_dap_handle->transport == HL_TRANSPORT_JTAG) { + /* Quirk required in JTAG. Read RDBUFF to get the data */ + retval = stlink_read_dap_register(stlink_dap_handle, + STLINK_DEBUG_PORT_ACCESS, reg, &dummy); + if (retval == ERROR_OK) + retval = stlink_read_dap_register(stlink_dap_handle, + STLINK_DEBUG_PORT_ACCESS, DP_RDBUFF, data); + } else { + retval = stlink_read_dap_register(stlink_dap_handle, + STLINK_DEBUG_PORT_ACCESS, reg, data); + } + + return stlink_dap_record_error(retval); +} + +/** */ +static int stlink_dap_op_queue_dp_write(struct adiv5_dap *dap, unsigned reg, + uint32_t data) +{ + int retval; + + if (!(stlink_dap_handle->version.flags & STLINK_F_HAS_DPBANKSEL)) + if (reg & 0x000000F0) { + LOG_ERROR("Banked DP registers not supported in current STLink FW"); + return ERROR_COMMAND_NOTFOUND; + } + + if (reg == DP_SELECT && (data & DP_SELECT_DPBANK) != 0) { + /* ignored if STLINK_F_HAS_DPBANKSEL, not properly managed otherwise */ + LOG_DEBUG("Ignoring DPBANKSEL while write SELECT"); + data &= ~DP_SELECT_DPBANK; + } + + retval = stlink_dap_check_reconnect(dap); + if (retval != ERROR_OK) + return retval; + + /* ST-Link does not like that we set CORUNDETECT */ + if (reg == DP_CTRL_STAT) + data &= ~CORUNDETECT; + + retval = stlink_write_dap_register(stlink_dap_handle, + STLINK_DEBUG_PORT_ACCESS, reg, data); + return stlink_dap_record_error(retval); +} + +/** */ +static int stlink_dap_op_queue_ap_read(struct adiv5_ap *ap, unsigned reg, + uint32_t *data) +{ + struct adiv5_dap *dap = ap->dap; + uint32_t dummy; + int retval; + + retval = stlink_dap_check_reconnect(dap); + if (retval != ERROR_OK) + return retval; + + if (reg != AP_REG_IDR) { + retval = stlink_dap_open_ap(ap->ap_num); + if (retval != ERROR_OK) + return retval; + } + data = data ? : &dummy; + retval = stlink_read_dap_register(stlink_dap_handle, ap->ap_num, reg, + data); + dap->stlink_flush_ap_write = false; + return stlink_dap_record_error(retval); +} + +/** */ +static int stlink_dap_op_queue_ap_write(struct adiv5_ap *ap, unsigned reg, + uint32_t data) +{ + struct adiv5_dap *dap = ap->dap; + int retval; + + retval = stlink_dap_check_reconnect(dap); + if (retval != ERROR_OK) + return retval; + + retval = stlink_dap_open_ap(ap->ap_num); + if (retval != ERROR_OK) + return retval; + + retval = stlink_write_dap_register(stlink_dap_handle, ap->ap_num, reg, + data); + dap->stlink_flush_ap_write = true; + return stlink_dap_record_error(retval); +} + +/** */ +static int stlink_dap_op_queue_ap_abort(struct adiv5_dap *dap, uint8_t *ack) +{ + LOG_WARNING("stlink_dap_op_queue_ap_abort()"); + return ERROR_OK; +} + +/** */ +static int stlink_dap_op_run(struct adiv5_dap *dap) +{ + uint32_t ctrlstat, pwrmask; + int retval, saved_retval; + + /* Here no LOG_DEBUG. This is called continuously! */ + + /* + * ST-Link returns immediately after a DAP write, without waiting for it + * to complete. + * Run a dummy read to DP_RDBUFF, as suggested in + * http://infocenter.arm.com/help/topic/com.arm.doc.faqs/ka16363.html + */ + if (dap->stlink_flush_ap_write) { + dap->stlink_flush_ap_write = false; + retval = stlink_dap_op_queue_dp_read(dap, DP_RDBUFF, NULL); + if (retval != ERROR_OK) { + dap->do_reconnect = true; + return retval; + } + } + + saved_retval = stlink_dap_get_and_clear_error(); + + retval = stlink_dap_op_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat); + if (retval != ERROR_OK) { + dap->do_reconnect = true; + return retval; + } + retval = stlink_dap_get_and_clear_error(); + if (retval != ERROR_OK) { + LOG_ERROR("Fail reading CTRL/STAT register. Force reconnect"); + dap->do_reconnect = true; + return retval; + } + + if (ctrlstat & SSTICKYERR) { + if (stlink_dap_param.transport == HL_TRANSPORT_JTAG) + retval = stlink_dap_op_queue_dp_write(dap, DP_CTRL_STAT, + ctrlstat & (dap->dp_ctrl_stat | SSTICKYERR)); + else + retval = stlink_dap_op_queue_dp_write(dap, DP_ABORT, STKERRCLR); + if (retval != ERROR_OK) { + dap->do_reconnect = true; + return retval; + } + retval = stlink_dap_get_and_clear_error(); + if (retval != ERROR_OK) { + dap->do_reconnect = true; + return retval; + } + } + + /* check for power lost */ + pwrmask = dap->dp_ctrl_stat & (CDBGPWRUPREQ | CSYSPWRUPREQ); + if ((ctrlstat & pwrmask) != pwrmask) + dap->do_reconnect = true; + + return saved_retval; +} + +/** */ +static void stlink_dap_op_quit(struct adiv5_dap *dap) +{ + int retval; + + retval = stlink_dap_closeall_ap(); + if (retval != ERROR_OK) + LOG_ERROR("Error closing APs"); +} + +static int stlink_dap_config_trace(bool enabled, + enum tpiu_pin_protocol pin_protocol, uint32_t port_size, + unsigned int *trace_freq, unsigned int traceclkin_freq, + uint16_t *prescaler) +{ + return stlink_config_trace(stlink_dap_handle, enabled, pin_protocol, + port_size, trace_freq, traceclkin_freq, + prescaler); +} + +static int stlink_dap_trace_read(uint8_t *buf, size_t *size) +{ + return stlink_usb_trace_read(stlink_dap_handle, buf, size); +} + +/** */ +COMMAND_HANDLER(stlink_dap_serial_command) +{ + LOG_DEBUG("stlink_dap_serial_command"); + + if (CMD_ARGC != 1) { + LOG_ERROR("Expected exactly one argument for \"st-link serial \"."); + return ERROR_COMMAND_SYNTAX_ERROR; + } + + if (stlink_dap_param.serial) { + LOG_WARNING("Command \"st-link serial\" already used. Replacing previous value"); + free((void *)stlink_dap_param.serial); + } + + stlink_dap_param.serial = strdup(CMD_ARGV[0]); + return ERROR_OK; +} + +/** */ +COMMAND_HANDLER(stlink_dap_vid_pid) +{ + unsigned int i, max_usb_ids = HLA_MAX_USB_IDS; + + if (CMD_ARGC > max_usb_ids * 2) { + LOG_WARNING("ignoring extra IDs in vid_pid " + "(maximum is %d pairs)", max_usb_ids); + CMD_ARGC = max_usb_ids * 2; + } + if (CMD_ARGC < 2 || (CMD_ARGC & 1)) { + LOG_WARNING("incomplete vid_pid configuration directive"); + return ERROR_COMMAND_SYNTAX_ERROR; + } + for (i = 0; i < CMD_ARGC; i += 2) { + COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i], stlink_dap_param.vid[i / 2]); + COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], stlink_dap_param.pid[i / 2]); + } + + /* null termination */ + stlink_dap_param.vid[i / 2] = stlink_dap_param.pid[i / 2] = 0; + + return ERROR_OK; +} + +/** */ +static const struct command_registration stlink_dap_subcommand_handlers[] = { + { + .name = "serial", + .handler = stlink_dap_serial_command, + .mode = COMMAND_CONFIG, + .help = "set the serial number of the adapter", + .usage = "", + }, + { + .name = "vid_pid", + .handler = stlink_dap_vid_pid, + .mode = COMMAND_CONFIG, + .help = "USB VID and PID of the adapter", + .usage = "(vid pid)+", + }, + COMMAND_REGISTRATION_DONE +}; + +/** */ +static const struct command_registration stlink_dap_command_handlers[] = { + { + .name = "st-link", + .mode = COMMAND_ANY, + .help = "perform st-link management", + .chain = stlink_dap_subcommand_handlers, + .usage = "", + }, + COMMAND_REGISTRATION_DONE +}; + +/** */ +static int stlink_dap_init(void) +{ + enum reset_types jtag_reset_config = jtag_get_reset_config(); + int retval; + + LOG_DEBUG("stlink_dap_init()"); + + if (jtag_reset_config & RESET_CNCT_UNDER_SRST) { + if (jtag_reset_config & RESET_SRST_NO_GATING) + stlink_dap_param.connect_under_reset = true; + else + LOG_WARNING("\'srst_nogate\' reset_config option is required"); + } + + if (transport_is_dapdirect_swd()) + stlink_dap_param.transport = HL_TRANSPORT_SWD; + else if (transport_is_dapdirect_jtag()) + stlink_dap_param.transport = HL_TRANSPORT_JTAG; + else { + LOG_ERROR("Unsupported transport"); + return ERROR_FAIL; + } + + retval = stlink_usb_open(&stlink_dap_param, (void **)&stlink_dap_handle); + if (retval != ERROR_OK) + return retval; + + if (!(stlink_dap_handle->version.flags & STLINK_F_HAS_DAP_REG)) { + LOG_ERROR("ST-Link version does not support DAP direct transport"); + return ERROR_FAIL; + } + return ERROR_OK; +} + +/** */ +static int stlink_dap_quit(void) +{ + LOG_DEBUG("stlink_dap_quit()"); + + free((void *)stlink_dap_param.serial); + stlink_dap_param.serial = NULL; + + return stlink_usb_close(stlink_dap_handle); +} + +/** */ +static int stlink_dap_reset(int req_trst, int req_srst) +{ + LOG_DEBUG("stlink_dap_reset(%d)", req_srst); + return stlink_usb_assert_srst(stlink_dap_handle, + req_srst ? STLINK_DEBUG_APIV2_DRIVE_NRST_LOW + : STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH); +} + +/** */ +static int stlink_dap_speed(int speed) +{ + if (speed == 0) { + LOG_ERROR("RTCK not supported. Set nonzero adapter_khz."); + return ERROR_JTAG_NOT_IMPLEMENTED; + } + + stlink_dap_param.initial_interface_speed = speed; + stlink_speed(stlink_dap_handle, speed, false); + return ERROR_OK; +} + +/** */ +static int stlink_dap_khz(int khz, int *jtag_speed) +{ + *jtag_speed = khz; + return ERROR_OK; +} + +/** */ +static int stlink_dap_speed_div(int speed, int *khz) +{ + *khz = speed; + return ERROR_OK; +} + +static const struct dap_ops stlink_dap_ops = { + .connect = stlink_dap_op_connect, + .send_sequence = stlink_dap_op_send_sequence, + .queue_dp_read = stlink_dap_op_queue_dp_read, + .queue_dp_write = stlink_dap_op_queue_dp_write, + .queue_ap_read = stlink_dap_op_queue_ap_read, + .queue_ap_write = stlink_dap_op_queue_ap_write, + .queue_ap_abort = stlink_dap_op_queue_ap_abort, + .run = stlink_dap_op_run, + .sync = NULL, /* optional */ + .quit = stlink_dap_op_quit, /* optional */ +}; + +static const char *const stlink_dap_transport[] = { "dapdirect_jtag", "dapdirect_swd", NULL }; + +struct adapter_driver stlink_dap_adapter_driver = { + .name = "st-link", + .transports = stlink_dap_transport, + .commands = stlink_dap_command_handlers, + + .init = stlink_dap_init, + .quit = stlink_dap_quit, + .reset = stlink_dap_reset, + .speed = stlink_dap_speed, + .khz = stlink_dap_khz, + .speed_div = stlink_dap_speed_div, + .config_trace = stlink_dap_config_trace, + .poll_trace = stlink_dap_trace_read, + + .dap_jtag_ops = &stlink_dap_ops, + .dap_swd_ops = &stlink_dap_ops, +};