X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fflash%2Fstm32x.c;h=aab8b9a9392017a95a64509458f87ed27145853f;hp=e151fc573811ffd0bb6f6d4710eabeaa76c92865;hb=fb1a9b2cb2f844a17d26dfeb3d26849364d93e26;hpb=fdf114ab0a5078ea0a46d060bb79f882954589ea diff --git a/src/flash/stm32x.c b/src/flash/stm32x.c index e151fc5738..aab8b9a939 100644 --- a/src/flash/stm32x.c +++ b/src/flash/stm32x.c @@ -24,24 +24,16 @@ #include "config.h" #endif -#include "replacements.h" - #include "stm32x.h" -#include "flash.h" -#include "target.h" -#include "log.h" #include "armv7m.h" -#include "algorithm.h" #include "binarybuffer.h" -#include -#include static int stm32x_register_commands(struct command_context_s *cmd_ctx); static int stm32x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank); static int stm32x_erase(struct flash_bank_s *bank, int first, int last); static int stm32x_protect(struct flash_bank_s *bank, int set, int first, int last); -static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count); +static int stm32x_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count); static int stm32x_probe(struct flash_bank_s *bank); static int stm32x_auto_probe(struct flash_bank_s *bank); //static int stm32x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); @@ -73,7 +65,7 @@ flash_driver_t stm32x_flash = static int stm32x_register_commands(struct command_context_s *cmd_ctx) { command_t *stm32x_cmd = register_command(cmd_ctx, NULL, "stm32x", NULL, COMMAND_ANY, "stm32x flash specific commands"); - + register_command(cmd_ctx, stm32x_cmd, "lock", stm32x_handle_lock_command, COMMAND_EXEC, "lock device"); register_command(cmd_ctx, stm32x_cmd, "unlock", stm32x_handle_unlock_command, COMMAND_EXEC, @@ -92,76 +84,76 @@ static int stm32x_register_commands(struct command_context_s *cmd_ctx) static int stm32x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank) { stm32x_flash_bank_t *stm32x_info; - + if (argc < 6) { LOG_WARNING("incomplete flash_bank stm32x configuration"); return ERROR_FLASH_BANK_INVALID; } - + stm32x_info = malloc(sizeof(stm32x_flash_bank_t)); bank->driver_priv = stm32x_info; - + stm32x_info->write_algorithm = NULL; stm32x_info->probed = 0; - + return ERROR_OK; } -static u32 stm32x_get_flash_status(flash_bank_t *bank) +static uint32_t stm32x_get_flash_status(flash_bank_t *bank) { target_t *target = bank->target; - u32 status; - + uint32_t status; + target_read_u32(target, STM32_FLASH_SR, &status); - + return status; } -static u32 stm32x_wait_status_busy(flash_bank_t *bank, int timeout) +static uint32_t stm32x_wait_status_busy(flash_bank_t *bank, int timeout) { target_t *target = bank->target; - u32 status; - + uint32_t status; + /* wait for busy to clear */ while (((status = stm32x_get_flash_status(bank)) & FLASH_BSY) && (timeout-- > 0)) { - LOG_DEBUG("status: 0x%x", status); + LOG_DEBUG("status: 0x%" PRIx32 "", status); alive_sleep(1); } /* Clear but report errors */ - if (status & (FLASH_WRPRTERR|FLASH_PGERR)) + if (status & (FLASH_WRPRTERR | FLASH_PGERR)) { - target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR|FLASH_PGERR); + target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR | FLASH_PGERR); } return status; } static int stm32x_read_options(struct flash_bank_s *bank) { - u32 optiondata; + uint32_t optiondata; stm32x_flash_bank_t *stm32x_info = NULL; target_t *target = bank->target; - + stm32x_info = bank->driver_priv; - + /* read current option bytes */ target_read_u32(target, STM32_FLASH_OBR, &optiondata); - - stm32x_info->option_bytes.user_options = (u16)0xFFF8|((optiondata >> 2) & 0x07); + + stm32x_info->option_bytes.user_options = (uint16_t)0xFFF8 | ((optiondata >> 2) & 0x07); stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5; - + if (optiondata & (1 << OPT_READOUT)) LOG_INFO("Device Security Bit Set"); - + /* each bit refers to a 4bank protection */ target_read_u32(target, STM32_FLASH_WRPR, &optiondata); - - stm32x_info->option_bytes.protection[0] = (u16)optiondata; - stm32x_info->option_bytes.protection[1] = (u16)(optiondata >> 8); - stm32x_info->option_bytes.protection[2] = (u16)(optiondata >> 16); - stm32x_info->option_bytes.protection[3] = (u16)(optiondata >> 24); - + + stm32x_info->option_bytes.protection[0] = (uint16_t)optiondata; + stm32x_info->option_bytes.protection[1] = (uint16_t)(optiondata >> 8); + stm32x_info->option_bytes.protection[2] = (uint16_t)(optiondata >> 16); + stm32x_info->option_bytes.protection[3] = (uint16_t)(optiondata >> 24); + return ERROR_OK; } @@ -169,36 +161,36 @@ static int stm32x_erase_options(struct flash_bank_s *bank) { stm32x_flash_bank_t *stm32x_info = NULL; target_t *target = bank->target; - u32 status; - + uint32_t status; + stm32x_info = bank->driver_priv; - + /* read current options */ stm32x_read_options(bank); - + /* unlock flash registers */ target_write_u32(target, STM32_FLASH_KEYR, KEY1); target_write_u32(target, STM32_FLASH_KEYR, KEY2); - + /* unlock option flash registers */ target_write_u32(target, STM32_FLASH_OPTKEYR, KEY1); target_write_u32(target, STM32_FLASH_OPTKEYR, KEY2); - + /* erase option bytes */ - target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER|FLASH_OPTWRE); - target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER|FLASH_STRT|FLASH_OPTWRE); - + target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER | FLASH_OPTWRE); + target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER | FLASH_STRT | FLASH_OPTWRE); + status = stm32x_wait_status_busy(bank, 10); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) return ERROR_FLASH_OPERATION_FAILED; - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) return ERROR_FLASH_OPERATION_FAILED; - + /* clear readout protection and complementary option bytes * this will also force a device unlock if set */ stm32x_info->option_bytes.RDP = 0x5AA5; - + return ERROR_OK; } @@ -206,83 +198,83 @@ static int stm32x_write_options(struct flash_bank_s *bank) { stm32x_flash_bank_t *stm32x_info = NULL; target_t *target = bank->target; - u32 status; - + uint32_t status; + stm32x_info = bank->driver_priv; - + /* unlock flash registers */ target_write_u32(target, STM32_FLASH_KEYR, KEY1); target_write_u32(target, STM32_FLASH_KEYR, KEY2); - + /* unlock option flash registers */ target_write_u32(target, STM32_FLASH_OPTKEYR, KEY1); target_write_u32(target, STM32_FLASH_OPTKEYR, KEY2); - + /* program option bytes */ - target_write_u32(target, STM32_FLASH_CR, FLASH_OPTPG|FLASH_OPTWRE); - + target_write_u32(target, STM32_FLASH_CR, FLASH_OPTPG | FLASH_OPTWRE); + /* write user option byte */ target_write_u16(target, STM32_OB_USER, stm32x_info->option_bytes.user_options); - + status = stm32x_wait_status_busy(bank, 10); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) return ERROR_FLASH_OPERATION_FAILED; - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) return ERROR_FLASH_OPERATION_FAILED; - + /* write protection byte 1 */ target_write_u16(target, STM32_OB_WRP0, stm32x_info->option_bytes.protection[0]); - + status = stm32x_wait_status_busy(bank, 10); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) return ERROR_FLASH_OPERATION_FAILED; - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) return ERROR_FLASH_OPERATION_FAILED; - + /* write protection byte 2 */ target_write_u16(target, STM32_OB_WRP1, stm32x_info->option_bytes.protection[1]); - + status = stm32x_wait_status_busy(bank, 10); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) return ERROR_FLASH_OPERATION_FAILED; - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) return ERROR_FLASH_OPERATION_FAILED; - + /* write protection byte 3 */ target_write_u16(target, STM32_OB_WRP2, stm32x_info->option_bytes.protection[2]); - + status = stm32x_wait_status_busy(bank, 10); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) return ERROR_FLASH_OPERATION_FAILED; - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) return ERROR_FLASH_OPERATION_FAILED; - + /* write protection byte 4 */ target_write_u16(target, STM32_OB_WRP3, stm32x_info->option_bytes.protection[3]); - + status = stm32x_wait_status_busy(bank, 10); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) return ERROR_FLASH_OPERATION_FAILED; - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) return ERROR_FLASH_OPERATION_FAILED; - + /* write readout protection bit */ target_write_u16(target, STM32_OB_RDP, stm32x_info->option_bytes.RDP); - + status = stm32x_wait_status_busy(bank, 10); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) return ERROR_FLASH_OPERATION_FAILED; - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) return ERROR_FLASH_OPERATION_FAILED; - + target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK); - + return ERROR_OK; } @@ -290,70 +282,70 @@ static int stm32x_protect_check(struct flash_bank_s *bank) { target_t *target = bank->target; stm32x_flash_bank_t *stm32x_info = bank->driver_priv; - - u32 protection; + + uint32_t protection; int i, s; int num_bits; int set; - + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - - /* medium density - each bit refers to a 4bank protection + + /* medium density - each bit refers to a 4bank protection * high density - each bit refers to a 2bank protection */ target_read_u32(target, STM32_FLASH_WRPR, &protection); - + /* medium density - each protection bit is for 4 * 1K pages * high density - each protection bit is for 2 * 2K pages */ num_bits = (bank->num_sectors / stm32x_info->ppage_size); - + if (stm32x_info->ppage_size == 2) { /* high density flash */ - + set = 1; - + if (protection & (1 << 31)) set = 0; - - /* bit 31 controls sector 62 - 255 protection */ + + /* bit 31 controls sector 62 - 255 protection */ for (s = 62; s < bank->num_sectors; s++) { bank->sectors[s].is_protected = set; } - + if (bank->num_sectors > 61) num_bits = 31; - + for (i = 0; i < num_bits; i++) { set = 1; - + if (protection & (1 << i)) set = 0; - + for (s = 0; s < stm32x_info->ppage_size; s++) bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set; } } else - { + { /* medium density flash */ for (i = 0; i < num_bits; i++) { set = 1; - - if( protection & (1 << i)) + + if ( protection & (1 << i)) set = 0; - + for (s = 0; s < stm32x_info->ppage_size; s++) bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set; } } - + return ERROR_OK; } @@ -361,40 +353,40 @@ static int stm32x_erase(struct flash_bank_s *bank, int first, int last) { target_t *target = bank->target; int i; - u32 status; - + uint32_t status; + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - + if ((first == 0) && (last == (bank->num_sectors - 1))) { return stm32x_mass_erase(bank); } - + /* unlock flash registers */ target_write_u32(target, STM32_FLASH_KEYR, KEY1); target_write_u32(target, STM32_FLASH_KEYR, KEY2); - + for (i = first; i <= last; i++) - { + { target_write_u32(target, STM32_FLASH_CR, FLASH_PER); target_write_u32(target, STM32_FLASH_AR, bank->base + bank->sectors[i].offset); - target_write_u32(target, STM32_FLASH_CR, FLASH_PER|FLASH_STRT); - + target_write_u32(target, STM32_FLASH_CR, FLASH_PER | FLASH_STRT); + status = stm32x_wait_status_busy(bank, 10); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) return ERROR_FLASH_OPERATION_FAILED; - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) return ERROR_FLASH_OPERATION_FAILED; bank->sectors[i].is_erased = 1; } target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK); - + return ERROR_OK; } @@ -402,38 +394,38 @@ static int stm32x_protect(struct flash_bank_s *bank, int set, int first, int las { stm32x_flash_bank_t *stm32x_info = NULL; target_t *target = bank->target; - u16 prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF}; + uint16_t prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF}; int i, reg, bit; int status; - u32 protection; - + uint32_t protection; + stm32x_info = bank->driver_priv; - + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - + if ((first && (first % stm32x_info->ppage_size)) || ((last + 1) && (last + 1) % stm32x_info->ppage_size)) { LOG_WARNING("sector start/end incorrect - stm32 has %dK sector protection", stm32x_info->ppage_size); return ERROR_FLASH_SECTOR_INVALID; } - - /* medium density - each bit refers to a 4bank protection + + /* medium density - each bit refers to a 4bank protection * high density - each bit refers to a 2bank protection */ target_read_u32(target, STM32_FLASH_WRPR, &protection); - - prot_reg[0] = (u16)protection; - prot_reg[1] = (u16)(protection >> 8); - prot_reg[2] = (u16)(protection >> 16); - prot_reg[3] = (u16)(protection >> 24); - + + prot_reg[0] = (uint16_t)protection; + prot_reg[1] = (uint16_t)(protection >> 8); + prot_reg[2] = (uint16_t)(protection >> 16); + prot_reg[3] = (uint16_t)(protection >> 24); + if (stm32x_info->ppage_size == 2) { /* high density flash */ - + /* bit 7 controls sector 62 - 255 protection */ if (last > 61) { @@ -442,18 +434,18 @@ static int stm32x_protect(struct flash_bank_s *bank, int set, int first, int las else prot_reg[3] |= (1 << 7); } - + if (first > 61) first = 62; if (last > 61) last = 61; - + for (i = first; i <= last; i++) { reg = (i / stm32x_info->ppage_size) / 8; bit = (i / stm32x_info->ppage_size) - (reg * 8); - - if( set ) + + if ( set ) prot_reg[reg] &= ~(1 << bit); else prot_reg[reg] |= (1 << bit); @@ -466,37 +458,37 @@ static int stm32x_protect(struct flash_bank_s *bank, int set, int first, int las { reg = (i / stm32x_info->ppage_size) / 8; bit = (i / stm32x_info->ppage_size) - (reg * 8); - - if( set ) + + if ( set ) prot_reg[reg] &= ~(1 << bit); else prot_reg[reg] |= (1 << bit); } } - + if ((status = stm32x_erase_options(bank)) != ERROR_OK) return status; - + stm32x_info->option_bytes.protection[0] = prot_reg[0]; stm32x_info->option_bytes.protection[1] = prot_reg[1]; stm32x_info->option_bytes.protection[2] = prot_reg[2]; stm32x_info->option_bytes.protection[3] = prot_reg[3]; - + return stm32x_write_options(bank); } -static int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count) +static int stm32x_write_block(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count) { stm32x_flash_bank_t *stm32x_info = bank->driver_priv; target_t *target = bank->target; - u32 buffer_size = 16384; + uint32_t buffer_size = 16384; working_area_t *source; - u32 address = bank->base + offset; + uint32_t address = bank->base + offset; reg_param_t reg_params[4]; armv7m_algorithm_t armv7m_info; int retval = ERROR_OK; - - u8 stm32x_flash_write_code[] = { + + uint8_t stm32x_flash_write_code[] = { /* write: */ 0xDF, 0xF8, 0x24, 0x40, /* ldr r4, STM32_FLASH_CR */ 0x09, 0x4D, /* ldr r5, STM32_FLASH_SR */ @@ -517,15 +509,15 @@ static int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, 0x10, 0x20, 0x02, 0x40, /* STM32_FLASH_CR: .word 0x40022010 */ 0x0C, 0x20, 0x02, 0x40 /* STM32_FLASH_SR: .word 0x4002200C */ }; - + /* flash write code */ if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code), &stm32x_info->write_algorithm) != ERROR_OK) { LOG_WARNING("no working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; }; - - if ((retval=target_write_buffer(target, stm32x_info->write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code))!=ERROR_OK) + + if ((retval = target_write_buffer(target, stm32x_info->write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code)) != ERROR_OK) return retval; /* memory buffer */ @@ -537,83 +529,83 @@ static int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */ if (stm32x_info->write_algorithm) target_free_working_area(target, stm32x_info->write_algorithm); - + LOG_WARNING("no large enough working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } }; - + armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; armv7m_info.core_mode = ARMV7M_MODE_ANY; - + init_reg_param(®_params[0], "r0", 32, PARAM_OUT); init_reg_param(®_params[1], "r1", 32, PARAM_OUT); init_reg_param(®_params[2], "r2", 32, PARAM_OUT); init_reg_param(®_params[3], "r3", 32, PARAM_IN); - + while (count > 0) { - u32 thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count; - - if ((retval = target_write_buffer(target, source->address, thisrun_count * 2, buffer))!=ERROR_OK) + uint32_t thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count; + + if ((retval = target_write_buffer(target, source->address, thisrun_count * 2, buffer)) != ERROR_OK) break; - + buf_set_u32(reg_params[0].value, 0, 32, source->address); buf_set_u32(reg_params[1].value, 0, 32, address); buf_set_u32(reg_params[2].value, 0, 32, thisrun_count); - - if ((retval = target->type->run_algorithm(target, 0, NULL, 4, reg_params, stm32x_info->write_algorithm->address, \ + + if ((retval = target_run_algorithm(target, 0, NULL, 4, reg_params, stm32x_info->write_algorithm->address, \ stm32x_info->write_algorithm->address + (sizeof(stm32x_flash_write_code) - 10), 10000, &armv7m_info)) != ERROR_OK) { LOG_ERROR("error executing stm32x flash write algorithm"); retval = ERROR_FLASH_OPERATION_FAILED; break; } - + if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_PGERR) { LOG_ERROR("flash memory not erased before writing"); /* Clear but report errors */ - target_write_u32(target, STM32_FLASH_SR, FLASH_PGERR); + target_write_u32(target, STM32_FLASH_SR, FLASH_PGERR); retval = ERROR_FLASH_OPERATION_FAILED; break; } - + if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_WRPRTERR) { LOG_ERROR("flash memory write protected"); /* Clear but report errors */ - target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR); + target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR); retval = ERROR_FLASH_OPERATION_FAILED; break; } - + buffer += thisrun_count * 2; address += thisrun_count * 2; count -= thisrun_count; } - + target_free_working_area(target, source); target_free_working_area(target, stm32x_info->write_algorithm); - + destroy_reg_param(®_params[0]); destroy_reg_param(®_params[1]); destroy_reg_param(®_params[2]); destroy_reg_param(®_params[3]); - + return retval; } -static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count) +static int stm32x_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count) { target_t *target = bank->target; - u32 words_remaining = (count / 2); - u32 bytes_remaining = (count & 0x00000001); - u32 address = bank->base + offset; - u32 bytes_written = 0; - u8 status; + uint32_t words_remaining = (count / 2); + uint32_t bytes_remaining = (count & 0x00000001); + uint32_t address = bank->base + offset; + uint32_t bytes_written = 0; + uint8_t status; int retval; - + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); @@ -622,16 +614,16 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c if (offset & 0x1) { - LOG_WARNING("offset 0x%x breaks required 2-byte alignment", offset); + LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - + /* unlock flash registers */ target_write_u32(target, STM32_FLASH_KEYR, KEY1); target_write_u32(target, STM32_FLASH_KEYR, KEY2); - + /* multiple half words (2-byte) to be programmed? */ - if (words_remaining > 0) + if (words_remaining > 0) { /* try using a block write */ if ((retval = stm32x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK) @@ -639,7 +631,7 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { /* if block write failed (no sufficient working area), - * we use normal (slow) single dword accesses */ + * we use normal (slow) single dword accesses */ LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); } else if (retval == ERROR_FLASH_OPERATION_FAILED) @@ -658,20 +650,20 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c while (words_remaining > 0) { - u16 value; - memcpy(&value, buffer + bytes_written, sizeof(u16)); + uint16_t value; + memcpy(&value, buffer + bytes_written, sizeof(uint16_t)); target_write_u32(target, STM32_FLASH_CR, FLASH_PG); target_write_u16(target, address, value); - + status = stm32x_wait_status_busy(bank, 5); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) { LOG_ERROR("flash memory not erased before writing"); return ERROR_FLASH_OPERATION_FAILED; } - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) { LOG_ERROR("flash memory write protected"); return ERROR_FLASH_OPERATION_FAILED; @@ -681,31 +673,31 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c words_remaining--; address += 2; } - + if (bytes_remaining) { - u16 value = 0xffff; + uint16_t value = 0xffff; memcpy(&value, buffer + bytes_written, bytes_remaining); target_write_u32(target, STM32_FLASH_CR, FLASH_PG); target_write_u16(target, address, value); - + status = stm32x_wait_status_busy(bank, 5); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) { LOG_ERROR("flash memory not erased before writing"); return ERROR_FLASH_OPERATION_FAILED; } - if( status & FLASH_PGERR ) + if ( status & FLASH_PGERR ) { LOG_ERROR("flash memory write protected"); return ERROR_FLASH_OPERATION_FAILED; } } - + target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK); - + return ERROR_OK; } @@ -714,10 +706,10 @@ static int stm32x_probe(struct flash_bank_s *bank) target_t *target = bank->target; stm32x_flash_bank_t *stm32x_info = bank->driver_priv; int i; - u16 num_pages; - u32 device_id; + uint16_t num_pages; + uint32_t device_id; int page_size; - + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); @@ -725,25 +717,25 @@ static int stm32x_probe(struct flash_bank_s *bank) } stm32x_info->probed = 0; - + /* read stm32 device id register */ target_read_u32(target, 0xE0042000, &device_id); - LOG_INFO( "device id = 0x%08x", device_id ); - + LOG_INFO( "device id = 0x%08" PRIx32 "", device_id ); + /* get flash size from target */ if (target_read_u16(target, 0x1FFFF7E0, &num_pages) != ERROR_OK) { /* failed reading flash size, default to max target family */ num_pages = 0xffff; } - + if ((device_id & 0x7ff) == 0x410) { /* medium density - we have 1k pages * 4 pages for a protection area */ page_size = 1024; stm32x_info->ppage_size = 4; - + /* check for early silicon */ if (num_pages == 0xffff) { @@ -758,7 +750,7 @@ static int stm32x_probe(struct flash_bank_s *bank) * 4 pages for a protection area */ page_size = 1024; stm32x_info->ppage_size = 4; - + /* check for early silicon */ if (num_pages == 0xffff) { @@ -773,7 +765,7 @@ static int stm32x_probe(struct flash_bank_s *bank) * 2 pages for a protection area */ page_size = 2048; stm32x_info->ppage_size = 2; - + /* check for early silicon */ if (num_pages == 0xffff) { @@ -788,7 +780,7 @@ static int stm32x_probe(struct flash_bank_s *bank) * 4 pages for a protection area */ page_size = 1024; stm32x_info->ppage_size = 4; - + /* check for early silicon */ if (num_pages == 0xffff) { @@ -802,17 +794,17 @@ static int stm32x_probe(struct flash_bank_s *bank) LOG_WARNING( "Cannot identify target as a STM32 family." ); return ERROR_FLASH_OPERATION_FAILED; } - + LOG_INFO( "flash size = %dkbytes", num_pages ); - + /* calculate numbers of pages */ num_pages /= (page_size / 1024); - + bank->base = 0x08000000; bank->size = (num_pages * page_size); bank->num_sectors = num_pages; bank->sectors = malloc(sizeof(flash_sector_t) * num_pages); - + for (i = 0; i < num_pages; i++) { bank->sectors[i].offset = i * page_size; @@ -820,9 +812,9 @@ static int stm32x_probe(struct flash_bank_s *bank) bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - + stm32x_info->probed = 1; - + return ERROR_OK; } @@ -844,36 +836,36 @@ static int stm32x_handle_part_id_command(struct command_context_s *cmd_ctx, char static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size) { target_t *target = bank->target; - u32 device_id; + uint32_t device_id; int printed; - + /* read stm32 device id register */ target_read_u32(target, 0xE0042000, &device_id); - + if ((device_id & 0x7ff) == 0x410) { printed = snprintf(buf, buf_size, "stm32x (Medium Density) - Rev: "); buf += printed; buf_size -= printed; - - switch(device_id >> 16) + + switch (device_id >> 16) { case 0x0000: snprintf(buf, buf_size, "A"); break; - + case 0x2000: snprintf(buf, buf_size, "B"); break; - + case 0x2001: snprintf(buf, buf_size, "Z"); break; - + case 0x2003: snprintf(buf, buf_size, "Y"); break; - + default: snprintf(buf, buf_size, "unknown"); break; @@ -884,13 +876,13 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size) printed = snprintf(buf, buf_size, "stm32x (Low Density) - Rev: "); buf += printed; buf_size -= printed; - - switch(device_id >> 16) + + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; - + default: snprintf(buf, buf_size, "unknown"); break; @@ -901,17 +893,17 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size) printed = snprintf(buf, buf_size, "stm32x (High Density) - Rev: "); buf += printed; buf_size -= printed; - - switch(device_id >> 16) + + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; - + case 0x1001: snprintf(buf, buf_size, "Z"); break; - + default: snprintf(buf, buf_size, "unknown"); break; @@ -922,8 +914,8 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size) printed = snprintf(buf, buf_size, "stm32x (Connectivity) - Rev: "); buf += printed; buf_size -= printed; - - switch(device_id >> 16) + + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); @@ -939,7 +931,7 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size) snprintf(buf, buf_size, "Cannot identify target as a stm32x\n"); return ERROR_FLASH_OPERATION_FAILED; } - + return ERROR_OK; } @@ -948,47 +940,47 @@ static int stm32x_handle_lock_command(struct command_context_s *cmd_ctx, char *c flash_bank_t *bank; target_t *target = NULL; stm32x_flash_bank_t *stm32x_info = NULL; - + if (argc < 1) { command_print(cmd_ctx, "stm32x lock "); - return ERROR_OK; + return ERROR_OK; } - + bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0)); if (!bank) { command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]); return ERROR_OK; } - + stm32x_info = bank->driver_priv; - + target = bank->target; - + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - + if (stm32x_erase_options(bank) != ERROR_OK) { command_print(cmd_ctx, "stm32x failed to erase options"); return ERROR_OK; } - - /* set readout protection */ + + /* set readout protection */ stm32x_info->option_bytes.RDP = 0; - + if (stm32x_write_options(bank) != ERROR_OK) { command_print(cmd_ctx, "stm32x failed to lock device"); return ERROR_OK; } - + command_print(cmd_ctx, "stm32x locked"); - + return ERROR_OK; } @@ -997,103 +989,103 @@ static int stm32x_handle_unlock_command(struct command_context_s *cmd_ctx, char flash_bank_t *bank; target_t *target = NULL; stm32x_flash_bank_t *stm32x_info = NULL; - + if (argc < 1) { command_print(cmd_ctx, "stm32x unlock "); - return ERROR_OK; + return ERROR_OK; } - + bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0)); if (!bank) { command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]); return ERROR_OK; } - + stm32x_info = bank->driver_priv; - + target = bank->target; - + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - + if (stm32x_erase_options(bank) != ERROR_OK) { command_print(cmd_ctx, "stm32x failed to unlock device"); return ERROR_OK; } - + if (stm32x_write_options(bank) != ERROR_OK) { command_print(cmd_ctx, "stm32x failed to lock device"); return ERROR_OK; } - + command_print(cmd_ctx, "stm32x unlocked"); - + return ERROR_OK; } static int stm32x_handle_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) { flash_bank_t *bank; - u32 optionbyte; + uint32_t optionbyte; target_t *target = NULL; stm32x_flash_bank_t *stm32x_info = NULL; - + if (argc < 1) { command_print(cmd_ctx, "stm32x options_read "); - return ERROR_OK; + return ERROR_OK; } - + bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0)); if (!bank) { command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]); return ERROR_OK; } - + stm32x_info = bank->driver_priv; - + target = bank->target; - + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - + target_read_u32(target, STM32_FLASH_OBR, &optionbyte); - command_print(cmd_ctx, "Option Byte: 0x%x", optionbyte); - - if (buf_get_u32((u8*)&optionbyte, OPT_ERROR, 1)) + command_print(cmd_ctx, "Option Byte: 0x%" PRIx32 "", optionbyte); + + if (buf_get_u32((uint8_t*)&optionbyte, OPT_ERROR, 1)) command_print(cmd_ctx, "Option Byte Complement Error"); - - if (buf_get_u32((u8*)&optionbyte, OPT_READOUT, 1)) + + if (buf_get_u32((uint8_t*)&optionbyte, OPT_READOUT, 1)) command_print(cmd_ctx, "Readout Protection On"); else command_print(cmd_ctx, "Readout Protection Off"); - - if (buf_get_u32((u8*)&optionbyte, OPT_RDWDGSW, 1)) + + if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDWDGSW, 1)) command_print(cmd_ctx, "Software Watchdog"); else command_print(cmd_ctx, "Hardware Watchdog"); - - if (buf_get_u32((u8*)&optionbyte, OPT_RDRSTSTOP, 1)) + + if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDRSTSTOP, 1)) command_print(cmd_ctx, "Stop: No reset generated"); else command_print(cmd_ctx, "Stop: Reset generated"); - - if (buf_get_u32((u8*)&optionbyte, OPT_RDRSTSTDBY, 1)) + + if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDRSTSTDBY, 1)) command_print(cmd_ctx, "Standby: No reset generated"); else command_print(cmd_ctx, "Standby: Reset generated"); - + return ERROR_OK; } @@ -1102,112 +1094,112 @@ static int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx flash_bank_t *bank; target_t *target = NULL; stm32x_flash_bank_t *stm32x_info = NULL; - u16 optionbyte = 0xF8; - + uint16_t optionbyte = 0xF8; + if (argc < 4) { - command_print(cmd_ctx, "stm32x options_write "); + command_print(cmd_ctx, "stm32x options_write "); return ERROR_OK; } - + bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0)); if (!bank) { command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]); return ERROR_OK; } - + stm32x_info = bank->driver_priv; - + target = bank->target; - + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - + if (strcmp(args[1], "SWWDG") == 0) { - optionbyte |= (1<<0); + optionbyte |= (1 << 0); } else { - optionbyte &= ~(1<<0); + optionbyte &= ~(1 << 0); } - + if (strcmp(args[2], "NORSTSTNDBY") == 0) { - optionbyte |= (1<<1); + optionbyte |= (1 << 1); } else { - optionbyte &= ~(1<<1); + optionbyte &= ~(1 << 1); } - + if (strcmp(args[3], "NORSTSTOP") == 0) { - optionbyte |= (1<<2); + optionbyte |= (1 << 2); } else { - optionbyte &= ~(1<<2); + optionbyte &= ~(1 << 2); } - + if (stm32x_erase_options(bank) != ERROR_OK) { command_print(cmd_ctx, "stm32x failed to erase options"); return ERROR_OK; } - + stm32x_info->option_bytes.user_options = optionbyte; - + if (stm32x_write_options(bank) != ERROR_OK) { command_print(cmd_ctx, "stm32x failed to write options"); return ERROR_OK; } - + command_print(cmd_ctx, "stm32x write options complete"); - + return ERROR_OK; } static int stm32x_mass_erase(struct flash_bank_s *bank) { target_t *target = bank->target; - u32 status; - + uint32_t status; + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - + /* unlock option flash registers */ target_write_u32(target, STM32_FLASH_KEYR, KEY1); target_write_u32(target, STM32_FLASH_KEYR, KEY2); - + /* mass erase flash memory */ target_write_u32(target, STM32_FLASH_CR, FLASH_MER); - target_write_u32(target, STM32_FLASH_CR, FLASH_MER|FLASH_STRT); - + target_write_u32(target, STM32_FLASH_CR, FLASH_MER | FLASH_STRT); + status = stm32x_wait_status_busy(bank, 10); - + target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK); - - if( status & FLASH_WRPRTERR ) + + if ( status & FLASH_WRPRTERR ) { LOG_ERROR("stm32x device protected"); return ERROR_OK; } - - if( status & FLASH_PGERR ) + + if ( status & FLASH_PGERR ) { LOG_ERROR("stm32x device programming failed"); return ERROR_OK; } - + return ERROR_OK; } @@ -1215,20 +1207,20 @@ static int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, c { flash_bank_t *bank; int i; - + if (argc < 1) { command_print(cmd_ctx, "stm32x mass_erase "); - return ERROR_OK; + return ERROR_OK; } - + bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0)); if (!bank) { command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]); return ERROR_OK; } - + if (stm32x_mass_erase(bank) == ERROR_OK) { /* set all sectors as erased */ @@ -1236,13 +1228,13 @@ static int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, c { bank->sectors[i].is_erased = 1; } - + command_print(cmd_ctx, "stm32x mass erase complete"); } else { command_print(cmd_ctx, "stm32x mass erase failed"); } - + return ERROR_OK; }