X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fflash%2Fnor%2Fstr7x.c;h=b5ee4d26bb4be14abdeb8f85c1bec08f8e468211;hp=91ef77b709bf2b6585d5651df6121ce5df9acf6a;hb=4da4e1cfb7d93dcedc333c11c787b83b8baf7dfa;hpb=16b6b5e7a86353dbc0c4823fe3d772c0faca7c1c diff --git a/src/flash/nor/str7x.c b/src/flash/nor/str7x.c index 91ef77b709..b5ee4d26bb 100644 --- a/src/flash/nor/str7x.c +++ b/src/flash/nor/str7x.c @@ -23,6 +23,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -32,7 +33,6 @@ #include #include - /* Flash registers */ #define FLASH_CR0 0x00000000 @@ -85,13 +85,11 @@ #define FLASH_ERR 0x00000001 -struct str7x_flash_bank -{ +struct str7x_flash_bank { uint32_t *sector_bits; uint32_t disable_bit; uint32_t busy_bits; uint32_t register_base; - struct working_area *write_algorithm; }; struct str7x_mem_layout { @@ -100,8 +98,7 @@ struct str7x_mem_layout { uint32_t sector_bit; }; -enum str7x_status_codes -{ +enum str7x_status_codes { STR7X_CMD_SUCCESS = 0, STR7X_INVALID_COMMAND = 1, STR7X_SRC_ADDR_ERROR = 2, @@ -135,7 +132,7 @@ static struct str7x_mem_layout mem_layout_str7bank1[] = { static int str7x_get_flash_adr(struct flash_bank *bank, uint32_t reg) { struct str7x_flash_bank *str7x_info = bank->driver_priv; - return (str7x_info->register_base | reg); + return str7x_info->register_base | reg; } static int str7x_build_block_list(struct flash_bank *bank) @@ -146,8 +143,7 @@ static int str7x_build_block_list(struct flash_bank *bank) int num_sectors; int b0_sectors = 0, b1_sectors = 0; - switch (bank->size) - { + switch (bank->size) { case 16 * 1024: b1_sectors = 2; break; @@ -173,8 +169,7 @@ static int str7x_build_block_list(struct flash_bank *bank) num_sectors = 0; - for (i = 0; i < b0_sectors; i++) - { + for (i = 0; i < b0_sectors; i++) { bank->sectors[num_sectors].offset = mem_layout_str7bank0[i].sector_start; bank->sectors[num_sectors].size = mem_layout_str7bank0[i].sector_size; bank->sectors[num_sectors].is_erased = -1; @@ -185,8 +180,7 @@ static int str7x_build_block_list(struct flash_bank *bank) str7x_info->sector_bits[num_sectors++] = mem_layout_str7bank0[i].sector_bit; } - for (i = 0; i < b1_sectors; i++) - { + for (i = 0; i < b1_sectors; i++) { bank->sectors[num_sectors].offset = mem_layout_str7bank1[i].sector_start; bank->sectors[num_sectors].size = mem_layout_str7bank1[i].sector_size; bank->sectors[num_sectors].is_erased = -1; @@ -207,9 +201,7 @@ FLASH_BANK_COMMAND_HANDLER(str7x_flash_bank_command) struct str7x_flash_bank *str7x_info; if (CMD_ARGC < 7) - { return ERROR_COMMAND_SYNTAX_ERROR; - } str7x_info = malloc(sizeof(struct str7x_flash_bank)); bank->driver_priv = str7x_info; @@ -219,21 +211,14 @@ FLASH_BANK_COMMAND_HANDLER(str7x_flash_bank_command) str7x_info->disable_bit = (1 << 1); if (strcmp(CMD_ARGV[6], "STR71x") == 0) - { str7x_info->register_base = 0x40100000; - } - else if (strcmp(CMD_ARGV[6], "STR73x") == 0) - { + else if (strcmp(CMD_ARGV[6], "STR73x") == 0) { str7x_info->register_base = 0x80100000; str7x_info->busy_bits = (FLASH_LOCK | FLASH_BSYA0); - } - else if (strcmp(CMD_ARGV[6], "STR75x") == 0) - { + } else if (strcmp(CMD_ARGV[6], "STR75x") == 0) { str7x_info->register_base = 0x20100000; str7x_info->disable_bit = (1 << 0); - } - else - { + } else { LOG_ERROR("unknown STR7x variant: '%s'", CMD_ARGV[6]); free(str7x_info); return ERROR_FLASH_BANK_INVALID; @@ -241,8 +226,6 @@ FLASH_BANK_COMMAND_HANDLER(str7x_flash_bank_command) str7x_build_block_list(bank); - str7x_info->write_algorithm = NULL; - return ERROR_OK; } @@ -263,8 +246,7 @@ static int str7x_waitbusy(struct flash_bank *bank) struct target *target = bank->target; struct str7x_flash_bank *str7x_info = bank->driver_priv; - for (i = 0 ; i < 10000; i++) - { + for (i = 0 ; i < 10000; i++) { uint32_t retval; err = target_read_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), &retval); if (err != ERROR_OK) @@ -290,35 +272,28 @@ static int str7x_result(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if (flash_flags & FLASH_WPF) - { + if (flash_flags & FLASH_WPF) { LOG_ERROR("str7x hw write protection set"); retval = ERROR_FAIL; } - if (flash_flags & FLASH_RESER) - { + if (flash_flags & FLASH_RESER) { LOG_ERROR("str7x suspended program erase not resumed"); retval = ERROR_FAIL; } - if (flash_flags & FLASH_10ER) - { + if (flash_flags & FLASH_10ER) { LOG_ERROR("str7x trying to set bit to 1 when it is already 0"); retval = ERROR_FAIL; } - if (flash_flags & FLASH_PGER) - { + if (flash_flags & FLASH_PGER) { LOG_ERROR("str7x program error"); retval = ERROR_FAIL; } - if (flash_flags & FLASH_ERER) - { + if (flash_flags & FLASH_ERER) { LOG_ERROR("str7x erase error"); retval = ERROR_FAIL; } - if (retval == ERROR_OK) - { - if (flash_flags & FLASH_ERR) - { + if (retval == ERROR_OK) { + if (flash_flags & FLASH_ERR) { /* this should always be set if one of the others are set... */ LOG_ERROR("str7x write operation failed / bad setup"); retval = ERROR_FAIL; @@ -336,8 +311,7 @@ static int str7x_protect_check(struct flash_bank *bank) int i; uint32_t flash_flags; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -347,8 +321,7 @@ static int str7x_protect_check(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { if (flash_flags & str7x_info->sector_bits[i]) bank->sectors[i].is_protected = 0; else @@ -368,16 +341,13 @@ static int str7x_erase(struct flash_bank *bank, int first, int last) uint32_t sectors = 0; int err; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } for (i = first; i <= last; i++) - { sectors |= str7x_info->sector_bits[i]; - } LOG_DEBUG("sectors: 0x%" PRIx32 "", sectors); @@ -423,16 +393,14 @@ static int str7x_protect(struct flash_bank *bank, int set, int first, int last) uint32_t cmd; uint32_t protect_blocks; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } protect_blocks = 0xFFFFFFFF; - if (set) - { + if (set) { for (i = first; i <= last; i++) protect_blocks &= ~(str7x_info->sector_bits[i]); } @@ -480,10 +448,11 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, struct str7x_flash_bank *str7x_info = bank->driver_priv; struct target *target = bank->target; uint32_t buffer_size = 32768; + struct working_area *write_algorithm; struct working_area *source; uint32_t address = bank->base + offset; struct reg_param reg_params[6]; - struct arm_algorithm armv4_5_info; + struct arm_algorithm arm_algo; int retval = ERROR_OK; /* see contib/loaders/flash/str7x.s for src */ @@ -499,7 +468,7 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, 0xe582400c, /* str r4, [r2, #0xc] */ 0xe3a04209, /* mov r4, #0x90000000 */ 0xe5824000, /* str r4, [r2, #0x0] */ - /* busy: */ + /* busy: */ 0xe5924000, /* ldr r4, [r2, #0x0] */ 0xe1140005, /* tst r4, r5 */ 0x1afffffc, /* bne busy */ @@ -516,34 +485,30 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, /* flash write code */ if (target_alloc_working_area_try(target, sizeof(str7x_flash_write_code), - &str7x_info->write_algorithm) != ERROR_OK) - { + &write_algorithm) != ERROR_OK) { return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; }; - target_write_buffer(target, str7x_info->write_algorithm->address, + target_write_buffer(target, write_algorithm->address, sizeof(str7x_flash_write_code), - (uint8_t*)str7x_flash_write_code); + (uint8_t *)str7x_flash_write_code); /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { - /* if we already allocated the writing code, but failed to get a + if (buffer_size <= 256) { + /* we already allocated the writing code, but failed to get a * buffer, free the algorithm */ - if (str7x_info->write_algorithm) - target_free_working_area(target, str7x_info->write_algorithm); + target_free_working_area(target, write_algorithm); LOG_WARNING("no large enough working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } } - armv4_5_info.common_magic = ARM_COMMON_MAGIC; - armv4_5_info.core_mode = ARM_MODE_SVC; - armv4_5_info.core_state = ARM_STATE_ARM; + arm_algo.common_magic = ARM_COMMON_MAGIC; + arm_algo.core_mode = ARM_MODE_SVC; + arm_algo.core_state = ARM_STATE_ARM; init_reg_param(®_params[0], "r0", 32, PARAM_OUT); init_reg_param(®_params[1], "r1", 32, PARAM_OUT); @@ -552,8 +517,7 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, init_reg_param(®_params[4], "r4", 32, PARAM_IN); init_reg_param(®_params[5], "r5", 32, PARAM_OUT); - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > (buffer_size / 8)) ? (buffer_size / 8) : count; target_write_buffer(target, source->address, thisrun_count * 8, buffer); @@ -564,16 +528,14 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, buf_set_u32(reg_params[3].value, 0, 32, thisrun_count); buf_set_u32(reg_params[5].value, 0, 32, str7x_info->busy_bits); - if ((retval = target_run_algorithm(target, 0, NULL, 6, reg_params, - str7x_info->write_algorithm->address, - str7x_info->write_algorithm->address + (sizeof(str7x_flash_write_code) - 4), - 10000, &armv4_5_info)) != ERROR_OK) - { + retval = target_run_algorithm(target, 0, NULL, 6, reg_params, + write_algorithm->address, + write_algorithm->address + (sizeof(str7x_flash_write_code) - 4), + 10000, &arm_algo); + if (retval != ERROR_OK) break; - } - if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00) - { + if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00) { retval = str7x_result(bank); break; } @@ -584,7 +546,7 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, } target_free_working_area(target, source); - target_free_working_area(target, str7x_info->write_algorithm); + target_free_working_area(target, write_algorithm); destroy_reg_param(®_params[0]); destroy_reg_param(®_params[1]); @@ -609,26 +571,22 @@ static int str7x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t check_address = offset; int i; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset & 0x7) - { + if (offset & 0x7) { LOG_WARNING("offset 0x%" PRIx32 " breaks required 8-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t sec_start = bank->sectors[i].offset; uint32_t sec_end = sec_start + bank->sectors[i].size; /* check if destination falls within the current sector */ - if ((check_address >= sec_start) && (check_address < sec_end)) - { + if ((check_address >= sec_start) && (check_address < sec_end)) { /* check if destination ends in the current sector */ if (offset + count < sec_end) check_address = offset + count; @@ -644,32 +602,25 @@ static int str7x_write(struct flash_bank *bank, uint8_t *buffer, target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0); /* multiple dwords (8-byte) to be programmed? */ - if (dwords_remaining > 0) - { + if (dwords_remaining > 0) { /* try using a block write */ - if ((retval = str7x_write_block(bank, buffer, offset, - dwords_remaining)) != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { + retval = str7x_write_block(bank, buffer, offset, dwords_remaining); + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { /* if block write failed (no sufficient working area), * we use normal (slow) single dword accesses */ LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); - } else - { + } else { return retval; } - } - else - { + } else { buffer += dwords_remaining * 8; address += dwords_remaining * 8; dwords_remaining = 0; } } - while (dwords_remaining > 0) - { + while (dwords_remaining > 0) { /* command */ cmd = FLASH_DWPG; target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd); @@ -704,17 +655,11 @@ static int str7x_write(struct flash_bank *bank, uint8_t *buffer, address += 8; } - if (bytes_remaining) - { + if (bytes_remaining) { uint8_t last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; - i = 0; - while (bytes_remaining > 0) - { - last_dword[i++] = *(buffer + bytes_written); - bytes_remaining--; - bytes_written++; - } + /* copy the last remaining bytes into the write buffer */ + memcpy(last_dword, buffer+bytes_written, bytes_remaining); /* command */ cmd = FLASH_DWPG; @@ -726,12 +671,10 @@ static int str7x_write(struct flash_bank *bank, uint8_t *buffer, /* data word 1 */ target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0), 4, 1, last_dword); - bytes_written += 4; /* data word 2 */ target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1), 4, 1, last_dword + 4); - bytes_written += 4; /* start programming cycle */ cmd = FLASH_DWPG | FLASH_WMS; @@ -784,9 +727,7 @@ COMMAND_HANDLER(str7x_handle_disable_jtag_command) uint16_t ProtectionRegs; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -797,8 +738,7 @@ COMMAND_HANDLER(str7x_handle_disable_jtag_command) target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -808,30 +748,24 @@ COMMAND_HANDLER(str7x_handle_disable_jtag_command) target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR0), ®); if (!(reg & str7x_info->disable_bit)) - { ProtectionLevel = 1; - } target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR1), ®); ProtectionRegs = ~(reg >> 16); - while (((ProtectionRegs) != 0) && (ProtectionLevel < 16)) - { + while (((ProtectionRegs) != 0) && (ProtectionLevel < 16)) { ProtectionRegs >>= 1; ProtectionLevel++; } - if (ProtectionLevel == 0) - { + if (ProtectionLevel == 0) { flash_cmd = FLASH_SPR; target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd); target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFB8); target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), 0xFFFFFFFD); flash_cmd = FLASH_SPR | FLASH_WMS; target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd); - } - else - { + } else { flash_cmd = FLASH_SPR; target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd); target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFBC); @@ -860,6 +794,7 @@ static const struct command_registration str7x_command_handlers[] = { .name = "str7x", .mode = COMMAND_ANY, .help = "str7x flash command group", + .usage = "", .chain = str7x_exec_command_handlers, }, COMMAND_REGISTRATION_DONE