X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fflash%2Fnor%2Fstm32lx.c;h=b8b530624c60ec1c50bd822adadb5be0b3607675;hp=fedab300619638bcb80fb19064bf2ee5795ac0a0;hb=f97aafdfafb13d146cdcac31dca49d30b8b58edd;hpb=38e44d1361a5dbefcbbc54cc8fd8b0bd53dbc89f diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c index fedab30061..b8b530624c 100644 --- a/src/flash/nor/stm32lx.c +++ b/src/flash/nor/stm32lx.c @@ -21,7 +21,7 @@ * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * ***************************************************************************/ #ifdef HAVE_CONFIG_H @@ -32,6 +32,7 @@ #include #include #include +#include /* stm32lx flash register locations */ @@ -87,6 +88,7 @@ /* other registers */ #define DBGMCU_IDCODE 0xE0042000 #define F_SIZE 0x1FF8004C +#define F_SIZE_MP 0x1FF800CC /* on 0x427 Medium+ and 0x436 HD devices */ /* Constants */ #define FLASH_PAGE_SIZE 256 @@ -119,8 +121,9 @@ static int stm32lx_erase_sector(struct flash_bank *bank, int sector); static int stm32lx_wait_until_bsy_clear(struct flash_bank *bank); struct stm32lx_flash_bank { - struct working_area *write_algorithm; int probed; + bool has_dual_banks; + uint32_t user_bank_size; }; /* flash bank stm32lx 0 0 @@ -142,8 +145,9 @@ FLASH_BANK_COMMAND_HANDLER(stm32lx_flash_bank_command) bank->driver_priv = stm32lx_info; - stm32lx_info->write_algorithm = NULL; stm32lx_info->probed = 0; + stm32lx_info->has_dual_banks = false; + stm32lx_info->user_bank_size = bank->size; return ERROR_OK; } @@ -155,11 +159,6 @@ static int stm32lx_protect_check(struct flash_bank *bank) uint32_t wrpr; - if (target->state != TARGET_HALTED) { - LOG_ERROR("Target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - /* * Read the WRPR word, and check each bit (corresponding to each * flash sector @@ -213,45 +212,35 @@ static int stm32lx_protect(struct flash_bank *bank, int set, int first, static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) { - struct stm32lx_flash_bank *stm32lx_info = bank->driver_priv; struct target *target = bank->target; - uint32_t buffer_size = 4096 * 4; + uint32_t buffer_size = 16384; + struct working_area *write_algorithm; struct working_area *source; uint32_t address = bank->base + offset; - struct reg_param reg_params[5]; + struct reg_param reg_params[3]; struct armv7m_algorithm armv7m_info; int retval = ERROR_OK; - uint32_t reg32; - /* see contib/loaders/flash/stm32lx.s for src */ + /* see contib/loaders/flash/stm32lx.S for src */ - static const uint16_t stm32lx_flash_write_code_16[] = { - /* 00000000 : */ - 0x2300, /* 0: 2300 movs r3, #0 */ - 0xe004, /* 2: e004 b.n e */ + static const uint8_t stm32lx_flash_write_code[] = { + /* write_word: */ + 0x00, 0x23, /* movs r3, #0 */ + 0x04, 0xe0, /* b test_done */ - /* 00000004 : */ - 0xf851, 0xcb04, /* 4: f851 cb04 ldr.w ip, [r1], #4 */ - 0xf840, 0xcb04, /* 8: f840 cb04 str.w ip, [r0], #4 */ - 0x3301, /* c: 3301 adds r3, #1 */ + /* write_word: */ + 0x51, 0xf8, 0x04, 0xcb, /* ldr ip, [r1], #4 */ + 0x40, 0xf8, 0x04, 0xcb, /* str ip, [r0], #4 */ + 0x01, 0x33, /* adds r3, #1 */ - /* 0000000e : */ - 0x4293, /* e: 4293 cmp r3, r2 */ - 0xd3f8, /* 10: d3f8 bcc.n 4 */ - 0xbe00, /* 12: be00 bkpt 0x0000 */ + /* test_done: */ + 0x93, 0x42, /* cmp r3, r2 */ + 0xf8, 0xd3, /* bcc write_word */ + 0x00, 0xbe, /* bkpt 0 */ + }; - }; - - /* Flip endian */ - uint8_t stm32lx_flash_write_code[sizeof(stm32lx_flash_write_code_16)]; - for (unsigned int i = 0; i < sizeof(stm32lx_flash_write_code_16) / 2; i++) { - stm32lx_flash_write_code[i * 2 + 0] = stm32lx_flash_write_code_16[i] - & 0xff; - stm32lx_flash_write_code[i * 2 + 1] = (stm32lx_flash_write_code_16[i] - >> 8) & 0xff; - } /* Check if there is an even number of half pages (128bytes) */ if (count % 128) { LOG_ERROR("there should be an even number " @@ -259,74 +248,77 @@ static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer, return ERROR_FAIL; } - /* Allocate working area */ - reg32 = sizeof(stm32lx_flash_write_code); - /* Add bytes to make 4byte aligned */ - reg32 += (4 - (reg32 % 4)) % 4; - retval = target_alloc_working_area(target, reg32, - &stm32lx_info->write_algorithm); - if (retval != ERROR_OK) - return retval; + /* flash write code */ + if (target_alloc_working_area(target, sizeof(stm32lx_flash_write_code), + &write_algorithm) != ERROR_OK) { + LOG_DEBUG("no working area for block memory writes"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + }; /* Write the flashing code */ retval = target_write_buffer(target, - stm32lx_info->write_algorithm->address, + write_algorithm->address, sizeof(stm32lx_flash_write_code), - (uint8_t *)stm32lx_flash_write_code); + stm32lx_flash_write_code); if (retval != ERROR_OK) { - target_free_working_area(target, stm32lx_info->write_algorithm); + target_free_working_area(target, write_algorithm); return retval; } /* Allocate half pages memory */ - while (target_alloc_working_area_try(target, buffer_size, &source) - != ERROR_OK) { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { if (buffer_size > 1024) buffer_size -= 1024; else buffer_size /= 2; if (buffer_size <= 256) { - /* if we already allocated the writing code, but failed to get a + /* we already allocated the writing code, but failed to get a * buffer, free the algorithm */ - if (stm32lx_info->write_algorithm) - target_free_working_area(target, stm32lx_info->write_algorithm); + target_free_working_area(target, write_algorithm); LOG_WARNING("no large enough working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } } - LOG_DEBUG("allocated working area for data (%" PRIx32 " bytes)", buffer_size); armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; - armv7m_info.core_mode = ARMV7M_MODE_ANY; + armv7m_info.core_mode = ARM_MODE_THREAD; init_reg_param(®_params[0], "r0", 32, PARAM_OUT); init_reg_param(®_params[1], "r1", 32, PARAM_OUT); init_reg_param(®_params[2], "r2", 32, PARAM_OUT); - init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT); - init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* Enable half-page write */ retval = stm32lx_enable_write_half_page(bank); if (retval != ERROR_OK) { target_free_working_area(target, source); - target_free_working_area(target, stm32lx_info->write_algorithm); + target_free_working_area(target, write_algorithm); destroy_reg_param(®_params[0]); destroy_reg_param(®_params[1]); destroy_reg_param(®_params[2]); - destroy_reg_param(®_params[3]); return retval; } + struct armv7m_common *armv7m = target_to_armv7m(target); + if (armv7m == NULL) { + + /* something is very wrong if armv7m is NULL */ + LOG_ERROR("unable to get armv7m target"); + return retval; + } + + /* save any DEMCR flags and configure target to catch any Hard Faults */ + uint32_t demcr_save = armv7m->demcr; + armv7m->demcr = VC_HARDERR; + /* Loop while there are bytes to write */ while (count > 0) { uint32_t this_count; this_count = (count > buffer_size) ? buffer_size : count; /* Write the next half pages */ - retval = target_write_buffer(target, source->address, this_count, - buffer); + retval = target_write_buffer(target, source->address, this_count, buffer); if (retval != ERROR_OK) break; @@ -341,10 +333,14 @@ static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer, /* 5: Execute the bunch of code */ retval = target_run_algorithm(target, 0, NULL, sizeof(reg_params) / sizeof(*reg_params), reg_params, - stm32lx_info->write_algorithm->address, 0, 20000, &armv7m_info); + write_algorithm->address, 0, 10000, &armv7m_info); if (retval != ERROR_OK) break; + /* check for Hard Fault */ + if (armv7m->exception_number == 3) + break; + /* 6: Wait while busy */ retval = stm32lx_wait_until_bsy_clear(bank); if (retval != ERROR_OK) @@ -355,106 +351,163 @@ static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer, count -= this_count; } + /* restore previous flags */ + armv7m->demcr = demcr_save; + + if (armv7m->exception_number == 3) { + + /* the stm32l15x devices seem to have an issue when blank. + * if a ram loader is executed on a blank device it will + * Hard Fault, this issue does not happen for a already programmed device. + * A related issue is described in the stm32l151xx errata (Doc ID 17721 Rev 6 - 2.1.3). + * The workaround of handling the Hard Fault exception does work, but makes the + * loader more complicated, as a compromise we manually write the pages, programming time + * is reduced by 50% using this slower method. + */ + + LOG_WARNING("couldn't use loader, falling back to page memory writes"); + + while (count > 0) { + uint32_t this_count; + this_count = (count > 128) ? 128 : count; + + /* Write the next half pages */ + retval = target_write_buffer(target, address, this_count, buffer); + if (retval != ERROR_OK) + break; + + /* Wait while busy */ + retval = stm32lx_wait_until_bsy_clear(bank); + if (retval != ERROR_OK) + break; + + buffer += this_count; + address += this_count; + count -= this_count; + } + } + if (retval == ERROR_OK) retval = stm32lx_lock_program_memory(bank); target_free_working_area(target, source); - target_free_working_area(target, stm32lx_info->write_algorithm); + target_free_working_area(target, write_algorithm); destroy_reg_param(®_params[0]); destroy_reg_param(®_params[1]); destroy_reg_param(®_params[2]); - destroy_reg_param(®_params[3]); return retval; } + static int stm32lx_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) { struct target *target = bank->target; uint32_t halfpages_number; - uint32_t words_remaining; - uint32_t bytes_remaining; + uint32_t bytes_remaining = 0; uint32_t address = bank->base + offset; uint32_t bytes_written = 0; - int retval; + int retval, retval2; if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset & 0x1) { - LOG_ERROR("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset); + if (offset & 0x3) { + LOG_ERROR("offset 0x%" PRIx32 " breaks required 4-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - /* Check if there are some full half pages */ - if (((offset % 128) == 0) && (count >= 128)) { - halfpages_number = count / 128; - words_remaining = (count - 128 * halfpages_number) / 4; - bytes_remaining = (count & 0x3); - } else { - halfpages_number = 0; - words_remaining = (count / 4); - bytes_remaining = (count & 0x3); - } - - if (halfpages_number) { - retval = stm32lx_write_half_pages(bank, buffer, offset, 128 - * halfpages_number); - if (retval != ERROR_OK) - return ERROR_FAIL; - } - - bytes_written = 128 * halfpages_number; - address += bytes_written; - retval = stm32lx_unlock_program_memory(bank); if (retval != ERROR_OK) return retval; - while (words_remaining > 0) { - uint32_t value; - uint8_t *p = buffer + bytes_written; + /* first we need to write any unaligned head bytes upto + * the next 128 byte page */ + + if (offset % 128) + bytes_remaining = MIN(count, 128 - (offset % 128)); - /* Prepare the word, Little endian conversion */ - value = p[0] + (p[1] << 8) + (p[2] << 16) + (p[3] << 24); + while (bytes_remaining > 0) { + uint8_t value[4] = {0xff, 0xff, 0xff, 0xff}; - retval = target_write_u32(target, address, value); + /* copy remaining bytes into the write buffer */ + uint32_t bytes_to_write = MIN(4, bytes_remaining); + memcpy(value, buffer + bytes_written, bytes_to_write); + + retval = target_write_buffer(target, address, 4, value); if (retval != ERROR_OK) - return retval; + goto reset_pg_and_lock; - bytes_written += 4; - words_remaining--; + bytes_written += bytes_to_write; + bytes_remaining -= bytes_to_write; address += 4; retval = stm32lx_wait_until_bsy_clear(bank); if (retval != ERROR_OK) - return retval; + goto reset_pg_and_lock; } - if (bytes_remaining) { - uint8_t last_word[4] = {0xff, 0xff, 0xff, 0xff}; + offset += bytes_written; + count -= bytes_written; + + /* this should always pass this check here */ + assert((offset % 128) == 0); + + /* calculate half pages */ + halfpages_number = count / 128; + + if (halfpages_number) { + retval = stm32lx_write_half_pages(bank, buffer + bytes_written, offset, 128 * halfpages_number); + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { + /* attempt slow memory writes */ + LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); + halfpages_number = 0; + } else { + if (retval != ERROR_OK) + return ERROR_FAIL; + } + } - /* copy the last remaining bytes into the write buffer */ - memcpy(last_word, buffer+bytes_written, bytes_remaining); + /* write any remaining bytes */ + uint32_t page_bytes_written = 128 * halfpages_number; + bytes_written += page_bytes_written; + address += page_bytes_written; + bytes_remaining = count - page_bytes_written; - retval = target_write_buffer(target, address, 4, last_word); + retval = stm32lx_unlock_program_memory(bank); + if (retval != ERROR_OK) + return retval; + + while (bytes_remaining > 0) { + uint8_t value[4] = {0xff, 0xff, 0xff, 0xff}; + + /* copy remaining bytes into the write buffer */ + uint32_t bytes_to_write = MIN(4, bytes_remaining); + memcpy(value, buffer + bytes_written, bytes_to_write); + + retval = target_write_buffer(target, address, 4, value); if (retval != ERROR_OK) - return retval; + goto reset_pg_and_lock; + + bytes_written += bytes_to_write; + bytes_remaining -= bytes_to_write; + address += 4; retval = stm32lx_wait_until_bsy_clear(bank); if (retval != ERROR_OK) - return retval; + goto reset_pg_and_lock; } - retval = stm32lx_lock_program_memory(bank); - if (retval != ERROR_OK) - return retval; +reset_pg_and_lock: + retval2 = stm32lx_lock_program_memory(bank); + if (retval == ERROR_OK) + retval = retval2; - return ERROR_OK; + return retval; } static int stm32lx_probe(struct flash_bank *bank) @@ -463,7 +516,11 @@ static int stm32lx_probe(struct flash_bank *bank) struct stm32lx_flash_bank *stm32lx_info = bank->driver_priv; int i; uint16_t flash_size_in_kb; + uint16_t max_flash_size_in_kb; uint32_t device_id; + uint32_t base_address = FLASH_BANK0_ADDRESS; + uint32_t second_bank_base; + uint32_t first_bank_size_in_kb; stm32lx_info->probed = 0; @@ -474,36 +531,96 @@ static int stm32lx_probe(struct flash_bank *bank) LOG_DEBUG("device id = 0x%08" PRIx32 "", device_id); - /* get flash size from target. */ - retval = target_read_u16(target, F_SIZE, &flash_size_in_kb); - if (retval != ERROR_OK) { - LOG_WARNING("failed reading flash size, default to max target family"); - /* failed reading flash size, default to max target family */ - flash_size_in_kb = 0xffff; - } - - /* some variants read 0 for flash size register - * use a max flash size as a default */ - if (flash_size_in_kb == 0) - flash_size_in_kb = 0xffff; - - if ((device_id & 0xfff) == 0x416) { - /* check for early silicon */ - if (flash_size_in_kb == 0xffff) { - /* number of sectors may be incorrect on early silicon */ - LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash"); - flash_size_in_kb = 128; - } - } else if ((device_id & 0xfff) == 0x436) { - /* check for early silicon */ - if (flash_size_in_kb == 0xffff) { - /* number of sectors may be incorrect on early silicon */ - LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 384k flash"); + /* set max flash size depending on family */ + switch (device_id & 0xfff) { + case 0x416: + max_flash_size_in_kb = 128; + break; + case 0x427: + /* single bank, high density */ + max_flash_size_in_kb = 256; + break; + case 0x436: + /* According to ST, the devices with id 0x436 have dual bank flash and comes with + * a total flash size of 384k or 256kb. However, the first bank is always 192kb, + * and second one holds the rest. The reason is that the 256kb version is actually + * the same physical flash but only the first 256kb are verified. + */ + max_flash_size_in_kb = 384; + first_bank_size_in_kb = 192; + stm32lx_info->has_dual_banks = true; + break; + case 0x437: + /* Dual bank, high density */ + max_flash_size_in_kb = 512; + first_bank_size_in_kb = 192; + stm32lx_info->has_dual_banks = true; + break; + default: + LOG_WARNING("Cannot identify target as a STM32L family."); + return ERROR_FAIL; + } + + /* Get the flash size from target. 0x427 and 0x436 devices use a + * different location for the Flash Size register, please see RM0038 r8 or + * newer. */ + if ((device_id & 0xfff) == 0x427 || (device_id & 0xfff) == 0x436 || + (device_id & 0xfff) == 0x437) + retval = target_read_u16(target, F_SIZE_MP, &flash_size_in_kb); + else + retval = target_read_u16(target, F_SIZE, &flash_size_in_kb); + + /* 0x436 devices report their flash size as a 0 or 1 code indicating 384K + * or 256K, respectively. Please see RM0038 r8 or newer and refer to + * section 30.1.1. */ + if (retval == ERROR_OK && (device_id & 0xfff) == 0x436) { + if (flash_size_in_kb == 0) flash_size_in_kb = 384; + else if (flash_size_in_kb == 1) + flash_size_in_kb = 256; + } + + /* Failed reading flash size or flash size invalid (early silicon), + * default to max target family */ + if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) { + LOG_WARNING("STM32L flash size failed, probe inaccurate - assuming %dk flash", + max_flash_size_in_kb); + flash_size_in_kb = max_flash_size_in_kb; + } else if (flash_size_in_kb > max_flash_size_in_kb) { + LOG_WARNING("STM32L probed flash size assumed incorrect since FLASH_SIZE=%dk > %dk, - assuming %dk flash", + flash_size_in_kb, max_flash_size_in_kb, max_flash_size_in_kb); + flash_size_in_kb = max_flash_size_in_kb; + } + + if (stm32lx_info->has_dual_banks) { + /* Use the configured base address to determine if this is the first or second flash bank. + * Verify that the base address is reasonably correct and determine the flash bank size + */ + second_bank_base = base_address + first_bank_size_in_kb * 1024; + if (bank->base == second_bank_base) { + /* This is the second bank */ + base_address = second_bank_base; + flash_size_in_kb = flash_size_in_kb - first_bank_size_in_kb; + } else if (bank->base == 0 || bank->base == base_address) { + /* This is the first bank */ + flash_size_in_kb = first_bank_size_in_kb; + } else { + LOG_WARNING("STM32L flash bank base address config is incorrect." + " 0x%" PRIx32 " but should rather be 0x%" PRIx32 " or 0x%" PRIx32, + bank->base, base_address, second_bank_base); + return ERROR_FAIL; } + LOG_INFO("STM32L flash has dual banks. Bank (%d) size is %dkb, base address is 0x%" PRIx32, + bank->bank_number, flash_size_in_kb, base_address); } else { - LOG_WARNING("Cannot identify target as a STM32L family."); - return ERROR_FAIL; + LOG_INFO("STM32L flash size is %dkb, base address is 0x%" PRIx32, flash_size_in_kb, base_address); + } + + /* if the user sets the size manually then ignore the probed value + * this allows us to work around devices that have a invalid flash size register value */ + if (stm32lx_info->user_bank_size) { + flash_size_in_kb = stm32lx_info->user_bank_size / 1024; + LOG_INFO("ignoring flash probed value, using configured bank size: %dkbytes", flash_size_in_kb); } /* STM32L - we have 32 sectors, 16 pages per sector -> 512 pages @@ -511,15 +628,14 @@ static int stm32lx_probe(struct flash_bank *bank) /* calculate numbers of sectors (4kB per sector) */ int num_sectors = (flash_size_in_kb * 1024) / FLASH_SECTOR_SIZE; - LOG_INFO("flash size = %dkbytes", flash_size_in_kb); if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } - bank->base = FLASH_BANK0_ADDRESS; bank->size = flash_size_in_kb * 1024; + bank->base = base_address; bank->num_sectors = num_sectors; bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors); if (bank->sectors == NULL) { @@ -603,68 +719,87 @@ static int stm32lx_get_info(struct flash_bank *bank, char *buf, int buf_size) { /* This method must return a string displaying information about the bank */ - struct target *target = bank->target; - uint32_t device_id; - int printed; + uint32_t dbgmcu_idcode; /* read stm32 device id register */ - int retval = target_read_u32(target, DBGMCU_IDCODE, &device_id); + int retval = target_read_u32(bank->target, DBGMCU_IDCODE, &dbgmcu_idcode); if (retval != ERROR_OK) return retval; - if ((device_id & 0xfff) == 0x416) { - printed = snprintf(buf, buf_size, "stm32lx - Rev: "); - buf += printed; - buf_size -= printed; + uint16_t device_id = dbgmcu_idcode & 0xfff; + uint16_t rev_id = dbgmcu_idcode >> 16; + const char *device_str; + const char *rev_str = NULL; - switch (device_id >> 16) { - case 0x1000: - snprintf(buf, buf_size, "A"); - break; + switch (device_id) { + case 0x416: + device_str = "STM32L1xx (Low/Medium Density)"; - case 0x1008: - snprintf(buf, buf_size, "Y"); - break; + switch (rev_id) { + case 0x1000: + rev_str = "A"; + break; - case 0x1018: - snprintf(buf, buf_size, "X"); - break; + case 0x1008: + rev_str = "Y"; + break; - case 0x1038: - snprintf(buf, buf_size, "W"); - break; + case 0x1018: + rev_str = "X"; + break; - case 0x1078: - snprintf(buf, buf_size, "V"); - break; + case 0x1038: + rev_str = "W"; + break; - default: - snprintf(buf, buf_size, "unknown"); - break; + case 0x1078: + rev_str = "V"; + break; } - } else if ((device_id & 0xfff) == 0x436) { - printed = snprintf(buf, buf_size, "stm32lx (HD) - Rev: "); - buf += printed; - buf_size -= printed; - - switch (device_id >> 16) { - case 0x1000: - snprintf(buf, buf_size, "A"); - break; + break; - case 0x1008: - snprintf(buf, buf_size, "Z"); - break; + case 0x427: + device_str = "STM32L1xx (Medium+ Density)"; - default: - snprintf(buf, buf_size, "unknown"); - break; + switch (rev_id) { + case 0x1018: + rev_str = "A"; + break; } - } else { - snprintf(buf, buf_size, "Cannot identify target as a stm32lx"); + break; + + case 0x436: + device_str = "STM32L1xx (Medium+/High Density)"; + + switch (rev_id) { + case 0x1000: + rev_str = "A"; + break; + + case 0x1008: + rev_str = "Z"; + break; + + case 0x1018: + rev_str = "Y"; + break; + } + break; + + case 0x437: + device_str = "STM32L1xx (Medium+/High Density)"; + break; + + default: + snprintf(buf, buf_size, "Cannot identify target as a STM32L1"); return ERROR_FAIL; } + if (rev_str != NULL) + snprintf(buf, buf_size, "%s - Rev: %s", device_str, rev_str); + else + snprintf(buf, buf_size, "%s - Rev: unknown (0x%04x)", device_str, rev_id); + return ERROR_OK; } @@ -710,6 +845,14 @@ static int stm32lx_unlock_program_memory(struct flash_bank *bank) * then by writing the 2 PRGKEY to the PRGKEYR register */ + /* check flash is not already unlocked */ + retval = target_read_u32(target, FLASH_PECR, ®32); + if (retval != ERROR_OK) + return retval; + + if ((reg32 & FLASH_PECR__PRGLOCK) == 0) + return ERROR_OK; + /* To unlock the PECR write the 2 PEKEY to the PEKEYR register */ retval = target_write_u32(target, FLASH_PEKEYR, PEKEY1); if (retval != ERROR_OK) @@ -745,6 +888,7 @@ static int stm32lx_unlock_program_memory(struct flash_bank *bank) LOG_ERROR("PRGLOCK is not cleared :("); return ERROR_FLASH_OPERATION_FAILED; } + return ERROR_OK; }