X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fflash%2Fnor%2Flpcspifi.c;h=943c151e22f0df37d174ddacfd0458e5a40602a2;hp=63901493c0593386540d368fa82993cda1ef3544;hb=47b8cf84202bf792cf66fbfa01169e9592236b8a;hpb=6581bf5f15f404a9a219cfed8eebced76b4414a5
diff --git a/src/flash/nor/lpcspifi.c b/src/flash/nor/lpcspifi.c
index 63901493c0..943c151e22 100644
--- a/src/flash/nor/lpcspifi.c
+++ b/src/flash/nor/lpcspifi.c
@@ -13,9 +13,7 @@
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ * along with this program. If not, see . *
***************************************************************************/
#ifdef HAVE_CONFIG_H
@@ -58,21 +56,6 @@ struct lpcspifi_flash_bank {
const struct flash_device *dev;
};
-struct lpcspifi_target {
- char *name;
- uint32_t tap_idcode;
- uint32_t spifi_base;
- uint32_t ssp_base;
- uint32_t io_base;
- uint32_t ioconfig_base; /* base address for the port word pin registers */
-};
-
-static const struct lpcspifi_target target_devices[] = {
- /* name, tap_idcode, spifi_base, ssp_base, io_base, ioconfig_base */
- { "LPC43xx/18xx", 0x4ba00477, 0x14000000, 0x40083000, 0x400F4000, 0x40086000 },
- { NULL, 0, 0, 0, 0, 0 }
-};
-
/* flash_bank lpcspifi
*/
FLASH_BANK_COMMAND_HANDLER(lpcspifi_flash_bank_command)
@@ -123,7 +106,7 @@ static int ssp_setcs(struct target *target, uint32_t io_base, unsigned int value
* and the controller is idle. */
static int poll_ssp_busy(struct target *target, uint32_t ssp_base, int timeout)
{
- long long endtime;
+ int64_t endtime;
uint32_t value;
int retval;
@@ -203,7 +186,7 @@ static int lpcspifi_set_hw_mode(struct flash_bank *bank)
return retval;
}
- LOG_DEBUG("Writing algorithm to working area at 0x%08" PRIx32,
+ LOG_DEBUG("Writing algorithm to working area at 0x%08" TARGET_PRIxADDR,
spifi_init_algorithm->address);
/* Write algorithm to working area */
retval = target_write_buffer(target,
@@ -342,7 +325,7 @@ static int wait_till_ready(struct flash_bank *bank, int timeout)
{
uint32_t status;
int retval;
- long long endtime;
+ int64_t endtime;
endtime = timeval_ms() + timeout;
do {
@@ -852,14 +835,9 @@ static int lpcspifi_read_flash_id(struct flash_bank *bank, uint32_t *id)
static int lpcspifi_probe(struct flash_bank *bank)
{
- struct target *target = bank->target;
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
- uint32_t ssp_base;
- uint32_t io_base;
- uint32_t ioconfig_base;
struct flash_sector *sectors;
uint32_t id = 0; /* silence uninitialized warning */
- const struct lpcspifi_target *target_device;
int retval;
/* If we've already probed, we should be fine to skip this time. */
@@ -867,26 +845,11 @@ static int lpcspifi_probe(struct flash_bank *bank)
return ERROR_OK;
lpcspifi_info->probed = 0;
- for (target_device = target_devices ; target_device->name ; ++target_device)
- if (target_device->tap_idcode == target->tap->idcode)
- break;
- if (!target_device->name) {
- LOG_ERROR("Device ID 0x%" PRIx32 " is not known as SPIFI capable",
- target->tap->idcode);
- return ERROR_FAIL;
- }
-
- ssp_base = target_device->ssp_base;
- io_base = target_device->io_base;
- ioconfig_base = target_device->ioconfig_base;
- lpcspifi_info->ssp_base = ssp_base;
- lpcspifi_info->io_base = io_base;
- lpcspifi_info->ioconfig_base = ioconfig_base;
+ lpcspifi_info->ssp_base = 0x40083000;
+ lpcspifi_info->io_base = 0x400F4000;
+ lpcspifi_info->ioconfig_base = 0x40086000;
lpcspifi_info->bank_num = bank->bank_number;
- LOG_DEBUG("Valid SPIFI on device %s at address 0x%" PRIx32,
- target_device->name, bank->base);
-
/* read and decode flash ID; returns in SW mode */
retval = lpcspifi_read_flash_id(bank, &id);
if (retval != ERROR_OK)