X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fecosboard.c;h=4249e1b8c6e157bf80b5d124e480cf9104533e15;hp=de2a42ccaab25924d86bf8b1bab75e4a61d2a4f9;hb=b2468e3c4f09cd4e9f204aeb885dfdbbeb0a8dbb;hpb=20354a66b963b17fb842b0e49b7d0acd3d554c54

diff --git a/src/ecosboard.c b/src/ecosboard.c
index de2a42ccaa..4249e1b8c6 100644
--- a/src/ecosboard.c
+++ b/src/ecosboard.c
@@ -101,7 +101,6 @@ char hwaddr[512];
 
 
 extern struct flash_driver *flash_drivers[];
-extern struct target_type *target_types[];
 
 #ifdef CYGPKG_PROFILE_GPROF
 #include <cyg/profile/profile.h>
@@ -847,7 +846,7 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
 	static int current_baud = 38400;
 	if (argc == 1)
 	{
-		command_print(cmd_ctx, "%d", current_baud);
+		Jim_SetResult(interp, Jim_NewIntObj(interp, current_baud));
 		return JIM_OK;
 	}
 	else if (argc != 2)
@@ -883,8 +882,8 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
 		baud = CYGNUM_SERIAL_BAUD_230400;
 		break;
 	default:
-		command_print(cmd_ctx, "unsupported baudrate");
-		return ERROR_INVALID_ARGUMENTS;
+		Jim_SetResult(interp, Jim_NewStringObj(interp, "unsupported baudrate", -1));
+		return JIM_ERR;
 	}
 
 	cyg_serial_info_t buf;
@@ -897,7 +896,7 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
 	err = cyg_io_lookup(ZY1000_SER_DEV, &serial_handle);
 	if (err != ENOERR)
 	{
-		LOG_ERROR("Could not open serial port\n");
+		Jim_SetResult(interp, Jim_NewStringObj(interp, "Could not open serial port", -1));
 		return JIM_ERR;
 	}
 
@@ -907,7 +906,7 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
 			&len);
 	if (err != ENOERR)
 	{
-		LOG_ERROR("Failed to get serial port settings %d", err);
+		Jim_SetResult(interp, Jim_NewStringObj(interp, "Failed to get serial port settings", -1));
 		return JIM_ERR;
 	}
 	buf.baud = baud;
@@ -916,7 +915,7 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
 			&len);
 	if (err != ENOERR)
 	{
-		LOG_ERROR("Failed to set serial port settings %d", err);
+		Jim_SetResult(interp, Jim_NewStringObj(interp, "Failed to set serial port settings", -1));
 		return JIM_ERR;
 	}
 
@@ -956,7 +955,11 @@ int main(int argc, char *argv[])
 
 	diag_init_putc(_zylinjtag_diag_write_char);
 	// We want this in the log.
-	diag_printf("Zylin ZY1000.\n");
+#ifdef CYGPKG_HAL_NIOS2
+	diag_printf("Zylin ZY1000 PCB revc.\n");
+#else
+	diag_printf("Zylin ZY1000 PCB revb.\n");
+#endif
 
 	err = mount("", "/ram", "ramfs");
 	if (err < 0)