X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=configure.ac;h=a6bda8856cdf3f5b4b6d79b33855358fcab0769d;hp=1a4c43c9085f37efd833d38f135b231e4b5aca78;hb=5c6e32612df3360abe0ada4e434783b5636643f2;hpb=9e741717757903656f3b8038f40335e8261f4487 diff --git a/configure.ac b/configure.ac index 1a4c43c908..a6bda8856c 100644 --- a/configure.ac +++ b/configure.ac @@ -1,5 +1,5 @@ AC_PREREQ(2.64) -AC_INIT([openocd], [0.10.0-rc2], +AC_INIT([openocd], [0.10.0+dev], [OpenOCD Mailing List ]) AC_CONFIG_SRCDIR([src/openocd.c]) @@ -110,14 +110,14 @@ m4_define([ADAPTER_OPT], [m4_translit(ADAPTER_ARG($1), [_], [-])]) m4_define([USB1_ADAPTERS], [[[ftdi], [MPSSE mode of FTDI based devices], [FTDI]], - [[stlink], [ST-Link JTAG Programmer], [HLADAPTER_STLINK]], + [[stlink], [ST-Link Programmer], [HLADAPTER_STLINK]], [[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]], [[ulink], [Keil ULINK JTAG Programmer], [ULINK]], [[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]], - [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]]]) - -m4_define([USB_ADAPTERS], - [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]], + [[ft232r], [Bitbang mode of FT232R based devices], [FT232R]], + [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]], + [[xds110], [TI XDS110 Debug Probe], [XDS110]], + [[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]], [[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]], [[aice], [Andes JTAG Programmer], [AICE]]]) @@ -129,6 +129,9 @@ m4_define([USB0_ADAPTERS], m4_define([HIDAPI_ADAPTERS], [[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]]]) +m4_define([HIDAPI_USB1_ADAPTERS], + [[[kitprog], [Cypress KitProg Programmer], [KITPROG]]]) + m4_define([LIBFTDI_ADAPTERS], [[[usb_blaster], [Altera USB-Blaster Compatible], [USB_BLASTER]], [[presto], [ASIX Presto Adapter], [PRESTO]], @@ -137,6 +140,9 @@ m4_define([LIBFTDI_ADAPTERS], m4_define([LIBJAYLINK_ADAPTERS], [[[jlink], [SEGGER J-Link Programmer], [JLINK]]]) +m4_define([PCIE_ADAPTERS], + [[[xlnx_pcie_xvc], [Xilinx XVC/PCIe], [XLNX_PCIE_XVC]]]) + AC_ARG_ENABLE([doxygen-html], AS_HELP_STRING([--disable-doxygen-html], @@ -167,7 +173,6 @@ AC_ARG_ENABLE([werror], [gcc_werror=$enableval], [gcc_werror=$gcc_warnings]) # set default verbose options, overridden by following options -debug_jtag_io=no debug_usb_io=no debug_usb_comms=no @@ -175,16 +180,10 @@ AC_ARG_ENABLE([verbose], AS_HELP_STRING([--enable-verbose], [Enable verbose JTAG I/O messages (for debugging).]), [ - debug_jtag_io=$enableval debug_usb_io=$enableval debug_usb_comms=$enableval ], []) -AC_ARG_ENABLE([verbose_jtag_io], - AS_HELP_STRING([--enable-verbose-jtag-io], - [Enable verbose JTAG I/O messages (for debugging).]), - [debug_jtag_io=$enableval], []) - AC_ARG_ENABLE([verbose_usb_io], AS_HELP_STRING([--enable-verbose-usb-io], [Enable verbose USB I/O messages (for debugging)]), @@ -195,12 +194,6 @@ AC_ARG_ENABLE([verbose_usb_comms], [Enable verbose USB communication messages (for debugging)]), [debug_usb_comms=$enableval], []) -AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]); -AC_MSG_RESULT([$debug_jtag_io]) -AS_IF([test "x$debug_jtag_io" = "xyes"], [ - AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages]) -]) - AC_MSG_CHECKING([whether to enable verbose USB I/O messages]); AC_MSG_RESULT([$debug_usb_io]) AS_IF([test "x$debug_usb_io" = "xyes"], [ @@ -229,6 +222,10 @@ AC_ARG_ENABLE([dummy], AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]), [build_dummy=$enableval], [build_dummy=no]) +AC_ARG_ENABLE([rshim], + AS_HELP_STRING([--enable-rshim], [Enable building the rshim driver]), + [build_rshim=$enableval], [build_rshim=no]) + m4_define([AC_ARG_ADAPTERS], [ m4_foreach([adapter], [$1], [AC_ARG_ENABLE(ADAPTER_OPT([adapter]), @@ -240,9 +237,9 @@ m4_define([AC_ARG_ADAPTERS], [ AC_ARG_ADAPTERS([ USB1_ADAPTERS, - USB_ADAPTERS, USB0_ADAPTERS, HIDAPI_ADAPTERS, + HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS, LIBJAYLINK_ADAPTERS ],[auto]) @@ -281,6 +278,20 @@ AC_ARG_ENABLE([ioutil], AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]), [build_ioutil=$enableval], [build_ioutil=no]) +AS_CASE(["${host_cpu}"], + [arm*|aarch64], [ + AC_ARG_ENABLE([bcm2835gpio], + AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]), + [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no]) + AC_ARG_ENABLE([imx_gpio], + AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]), + [build_imx_gpio=$enableval], [build_imx_gpio=no]) + ], + [ + build_bcm2835gpio=no + build_imx_gpio=no +]) + AS_CASE(["${host_cpu}"], [arm*], [ AC_ARG_ENABLE([ep93xx], @@ -290,15 +301,10 @@ AS_CASE(["${host_cpu}"], AC_ARG_ENABLE([at91rm9200], AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]), [build_at91rm9200=$enableval], [build_at91rm9200=no]) - - AC_ARG_ENABLE([bcm2835gpio], - AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]), - [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no]) ], [ build_ep93xx=no build_at91rm9200=no - build_bcm2835gpio=no ]) AC_ARG_ENABLE([gw16012], @@ -318,12 +324,27 @@ AC_ARG_ENABLE([sysfsgpio], AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]), [build_sysfsgpio=$enableval], [build_sysfsgpio=no]) +AC_ARG_ENABLE([xlnx_pcie_xvc], + AS_HELP_STRING([--enable-xlnx-pcie-xvc], [Enable building support for Xilinx XVC/PCIe.]), + [build_xlnx_pcie_xvc=$enableval], [build_xlnx_pcie_xvc=no]) + AS_CASE([$host_os], [linux*], [], [ AS_IF([test "x$build_sysfsgpio" = "xyes"], [ AC_MSG_ERROR([sysfsgpio is only available on linux]) ]) + + AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [ + AC_MSG_ERROR([xlnx_pcie_xvc is only available on linux]) + ]) + + AS_CASE([$host_os], [freebsd*], [], + [ + AS_IF([test "x$build_rshim" = "xyes"], [ + AC_MSG_ERROR([build_rshim is only available on linux or freebsd]) + ]) + ]) ]) AC_ARG_ENABLE([minidriver_dummy], @@ -468,6 +489,12 @@ AS_IF([test "x$build_parport" = "xyes"], [ AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.]) ]) +AS_IF([test "x$build_rshim" = "xyes"], [ + AC_DEFINE([BUILD_RSHIM], [1], [1 if you want to debug BlueField SoC via rshim.]) +], [ + AC_DEFINE([BUILD_RSHIM], [0], [0 if you don't want to debug BlueField SoC via rshim.]) +]) + AS_IF([test "x$build_dummy" = "xyes"], [ build_bitbang=yes AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.]) @@ -508,6 +535,13 @@ AS_IF([test "x$build_bcm2835gpio" = "xyes"], [ AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.]) ]) +AS_IF([test "x$build_imx_gpio" = "xyes"], [ + build_bitbang=yes + AC_DEFINE([BUILD_IMX_GPIO], [1], [1 if you want imx_gpio.]) +], [ + AC_DEFINE([BUILD_IMX_GPIO], [0], [0 if you don't want imx_gpio.]) +]) + AS_IF([test "x$parport_use_ppdev" = "xyes"], [ AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.]) ], [ @@ -552,7 +586,7 @@ AS_IF([test "x$build_buspirate" = "xyes"], [ AS_IF([test "x$use_internal_jimtcl" = "xyes"], [ AS_IF([test -f "$srcdir/jimtcl/configure.ac"], [ - AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim --with-ext="eventloop array clock regexp stdlib tclcompat" --without-ext="default"]) + AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim]) ], [ AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.]) ]) @@ -572,6 +606,13 @@ AS_IF([test "x$build_sysfsgpio" = "xyes"], [ AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.]) ]) +AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [ + build_xlnx_pcie_xvc=yes + AC_DEFINE([BUILD_XLNX_PCIE_XVC], [1], [1 if you want the Xilinx XVC/PCIe driver.]) +], [ + AC_DEFINE([BUILD_XLNX_PCIE_XVC], [0], [0 if you don't want Xilinx XVC/PCIe driver.]) +]) + PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [ use_libusb1=yes AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x]) @@ -602,11 +643,14 @@ PKG_CHECK_MODULES([LIBFTDI], [libftdi1], [use_libftdi=yes], [ PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no]) ]) -PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.1], +PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.2], [use_libjaylink=yes], [use_libjaylink=no]) m4_define([PROCESS_ADAPTERS], [ m4_foreach([adapter], [$1], [ + AS_IF([test "x$build_zy1000" = "xyes"], [ + ADAPTER_VAR([adapter])=no + ]) AS_IF([test $2], [ AS_IF([test "x$ADAPTER_VAR([adapter])" != "xno"], [ AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).) @@ -624,11 +668,11 @@ m4_define([PROCESS_ADAPTERS], [ ]) PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x]) -PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1]) PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1]) PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi]) +PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x]) PROCESS_ADAPTERS([LIBFTDI_ADAPTERS], ["x$use_libftdi" = "xyes"], [libftdi]) -PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_libusb1" = "xyes" -a "x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libusb-1.x or libjaylink-0.1]) +PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libjaylink-0.2]) AS_IF([test "x$build_openjtag" = "xyes"], [ AS_IF([test "x$use_libusb1" != "xyes" -a "x$use_libusb0" != "xyes"], [ @@ -670,6 +714,7 @@ AM_CONDITIONAL([ZY1000_MASTER], [test "x$build_zy1000_master" = "xyes"]) AM_CONDITIONAL([IOUTIL], [test "x$build_ioutil" = "xyes"]) AM_CONDITIONAL([AT91RM9200], [test "x$build_at91rm9200" = "xyes"]) AM_CONDITIONAL([BCM2835GPIO], [test "x$build_bcm2835gpio" = "xyes"]) +AM_CONDITIONAL([IMX_GPIO], [test "x$build_imx_gpio" = "xyes"]) AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"]) AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes" -o "x$build_jtag_vpi" = "xyes"]) AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"]) @@ -679,6 +724,7 @@ AM_CONDITIONAL([OOCD_TRACE], [test "x$build_oocd_trace" = "xyes"]) AM_CONDITIONAL([REMOTE_BITBANG], [test "x$build_remote_bitbang" = "xyes"]) AM_CONDITIONAL([BUSPIRATE], [test "x$build_buspirate" = "xyes"]) AM_CONDITIONAL([SYSFSGPIO], [test "x$build_sysfsgpio" = "xyes"]) +AM_CONDITIONAL([XLNX_PCIE_XVC], [test "x$build_xlnx_pcie_xvc" = "xyes"]) AM_CONDITIONAL([USE_LIBUSB0], [test "x$use_libusb0" = "xyes"]) AM_CONDITIONAL([USE_LIBUSB1], [test "x$use_libusb1" = "xyes"]) AM_CONDITIONAL([IS_CYGWIN], [test "x$is_cygwin" = "xyes"]) @@ -689,6 +735,7 @@ AM_CONDITIONAL([BITQ], [test "x$build_bitq" = "xyes"]) AM_CONDITIONAL([USE_LIBFTDI], [test "x$use_libftdi" = "xyes"]) AM_CONDITIONAL([USE_HIDAPI], [test "x$use_hidapi" = "xyes"]) AM_CONDITIONAL([USE_LIBJAYLINK], [test "x$use_libjaylink" = "xyes"]) +AM_CONDITIONAL([RSHIM], [test "x$build_rshim" = "xyes"]) AM_CONDITIONAL([MINIDRIVER], [test "x$build_minidriver" = "xyes"]) AM_CONDITIONAL([MINIDRIVER_DUMMY], [test "x$build_minidriver_dummy" = "xyes"]) @@ -741,7 +788,7 @@ AS_IF([test "x${gcc_werror}" = "xyes"], [ GCC_WARNINGS="${GCC_WARNINGS} -Werror" ]) -# overide default gcc cflags +# override default gcc cflags AS_IF([test "x$gcc_warnings" = "xyes"], [ AC_SUBST([GCC_WARNINGS], [$GCC_WARNINGS]) ]) @@ -755,8 +802,9 @@ echo echo echo OpenOCD configuration summary echo -------------------------------------------------- -m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS, - HIDAPI_ADAPTERS, LIBFTDI_ADAPTERS, LIBJAYLINK_ADAPTERS], +m4_foreach([adapter], [USB1_ADAPTERS, USB0_ADAPTERS, + HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS, + LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS], [s=m4_format(["%-40s"], ADAPTER_DESC([adapter])) AS_CASE([$ADAPTER_VAR([adapter])], [auto], [