X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=configure.ac;h=569816637ff853ae33a4d838fe25c550a93c2e0b;hp=687e95ce9a11c767142c92ff192ca045021bb8b1;hb=c1f4d9e6e8f9cdab122db36299e039a73151ffe4;hpb=6ddf26c83d0a87b3eb26f75a7da95f13b9c348d9

diff --git a/configure.ac b/configure.ac
index 687e95ce9a..569816637f 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,5 +1,5 @@
 AC_PREREQ(2.64)
-AC_INIT([openocd], [0.10.0-dev],
+AC_INIT([openocd], [0.10.0+dev],
   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])
 
@@ -22,7 +22,7 @@ AH_BOTTOM([
 #include <helper/replacements.h>
 ])
 
-AC_LANG_C
+AC_LANG([C])
 AC_PROG_CC
 AC_PROG_CC_C99
 AM_PROG_CC_C_O
@@ -34,7 +34,7 @@ m4_defun([_LT_AC_LANG_CXX_CONFIG], [:])
 m4_defun([_LT_AC_LANG_F77_CONFIG], [:])
 m4_defun([_LT_AC_LANG_GCJ_CONFIG], [:])
 AC_DISABLE_SHARED
-AC_PROG_LIBTOOL
+LT_INIT
 AC_SUBST([LIBTOOL_DEPS])
 
 dnl configure checks required for Jim files (these are obsolete w/ C99)
@@ -110,14 +110,14 @@ m4_define([ADAPTER_OPT], [m4_translit(ADAPTER_ARG($1), [_], [-])])
 
 m4_define([USB1_ADAPTERS],
 	[[[ftdi], [MPSSE mode of FTDI based devices], [FTDI]],
-	[[stlink], [ST-Link JTAG Programmer], [HLADAPTER_STLINK]],
+	[[stlink], [ST-Link Programmer], [HLADAPTER_STLINK]],
 	[[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]],
 	[[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
 	[[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
-	[[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]]])
-
-m4_define([USB_ADAPTERS],
-	[[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
+	[[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
+	[[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
+	[[xds110], [TI XDS110 Debug Probe], [XDS110]],
+	[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
 	[[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]],
 	[[aice], [Andes JTAG Programmer], [AICE]]])
 
@@ -127,16 +127,26 @@ m4_define([USB0_ADAPTERS],
 	[[armjtagew], [Olimex ARM-JTAG-EW Programmer], [ARMJTAGEW]]])
 
 m4_define([HIDAPI_ADAPTERS],
-	[[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]]])
+	[[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]],
+	[[nulink], [Nu-Link Programmer], [HLADAPTER_NULINK]]])
+
+m4_define([HIDAPI_USB1_ADAPTERS],
+	[[[kitprog], [Cypress KitProg Programmer], [KITPROG]]])
 
 m4_define([LIBFTDI_ADAPTERS],
 	[[[usb_blaster], [Altera USB-Blaster Compatible], [USB_BLASTER]],
 	[[presto], [ASIX Presto Adapter], [PRESTO]],
 	[[openjtag], [OpenJTAG Adapter], [OPENJTAG]]])
 
+m4_define([LIBGPIOD_ADAPTERS],
+	[[[linuxgpiod], [Linux GPIO bitbang through libgpiod], [LINUXGPIOD]]])
+
 m4_define([LIBJAYLINK_ADAPTERS],
 	[[[jlink], [SEGGER J-Link Programmer], [JLINK]]])
 
+m4_define([PCIE_ADAPTERS],
+	[[[xlnx_pcie_xvc], [Xilinx XVC/PCIe], [XLNX_PCIE_XVC]]])
+
 
 AC_ARG_ENABLE([doxygen-html],
   AS_HELP_STRING([--disable-doxygen-html],
@@ -167,7 +177,6 @@ AC_ARG_ENABLE([werror],
   [gcc_werror=$enableval], [gcc_werror=$gcc_warnings])
 
 # set default verbose options, overridden by following options
-debug_jtag_io=no
 debug_usb_io=no
 debug_usb_comms=no
 
@@ -175,16 +184,10 @@ AC_ARG_ENABLE([verbose],
   AS_HELP_STRING([--enable-verbose],
       [Enable verbose JTAG I/O messages (for debugging).]),
   [
-  debug_jtag_io=$enableval
   debug_usb_io=$enableval
   debug_usb_comms=$enableval
   ], [])
 
-AC_ARG_ENABLE([verbose_jtag_io],
-  AS_HELP_STRING([--enable-verbose-jtag-io],
-      [Enable verbose JTAG I/O messages (for debugging).]),
-  [debug_jtag_io=$enableval], [])
-
 AC_ARG_ENABLE([verbose_usb_io],
   AS_HELP_STRING([--enable-verbose-usb-io],
       [Enable verbose USB I/O messages (for debugging)]),
@@ -195,12 +198,6 @@ AC_ARG_ENABLE([verbose_usb_comms],
       [Enable verbose USB communication messages (for debugging)]),
   [debug_usb_comms=$enableval], [])
 
-AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]);
-AC_MSG_RESULT([$debug_jtag_io])
-AS_IF([test "x$debug_jtag_io" = "xyes"], [
-  AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages])
-])
-
 AC_MSG_CHECKING([whether to enable verbose USB I/O messages]);
 AC_MSG_RESULT([$debug_usb_io])
 AS_IF([test "x$debug_usb_io" = "xyes"], [
@@ -229,6 +226,10 @@ AC_ARG_ENABLE([dummy],
   AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
   [build_dummy=$enableval], [build_dummy=no])
 
+AC_ARG_ENABLE([rshim],
+  AS_HELP_STRING([--enable-rshim], [Enable building the rshim driver]),
+  [build_rshim=$enableval], [build_rshim=no])
+
 m4_define([AC_ARG_ADAPTERS], [
   m4_foreach([adapter], [$1],
 	[AC_ARG_ENABLE(ADAPTER_OPT([adapter]),
@@ -240,10 +241,11 @@ m4_define([AC_ARG_ADAPTERS], [
 
 AC_ARG_ADAPTERS([
   USB1_ADAPTERS,
-  USB_ADAPTERS,
   USB0_ADAPTERS,
   HIDAPI_ADAPTERS,
+  HIDAPI_USB1_ADAPTERS,
   LIBFTDI_ADAPTERS,
+  LIBGPIOD_ADAPTERS,
   LIBJAYLINK_ADAPTERS
   ],[auto])
 
@@ -265,6 +267,10 @@ AC_ARG_ENABLE([jtag_vpi],
   AS_HELP_STRING([--enable-jtag_vpi], [Enable building support for JTAG VPI]),
   [build_jtag_vpi=$enableval], [build_jtag_vpi=no])
 
+AC_ARG_ENABLE([jtag_dpi],
+  AS_HELP_STRING([--enable-jtag_dpi], [Enable building support for JTAG DPI]),
+  [build_jtag_dpi=$enableval], [build_jtag_dpi=no])
+
 AC_ARG_ENABLE([amtjtagaccel],
   AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
   [build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
@@ -281,6 +287,20 @@ AC_ARG_ENABLE([ioutil],
   AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
   [build_ioutil=$enableval], [build_ioutil=no])
 
+AS_CASE(["${host_cpu}"],
+  [arm*|aarch64], [
+    AC_ARG_ENABLE([bcm2835gpio],
+      AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+      [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
+    AC_ARG_ENABLE([imx_gpio],
+      AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
+      [build_imx_gpio=$enableval], [build_imx_gpio=no])
+  ],
+  [
+    build_bcm2835gpio=no
+    build_imx_gpio=no
+])
+
 AS_CASE(["${host_cpu}"],
   [arm*], [
     AC_ARG_ENABLE([ep93xx],
@@ -290,15 +310,10 @@ AS_CASE(["${host_cpu}"],
     AC_ARG_ENABLE([at91rm9200],
       AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
       [build_at91rm9200=$enableval], [build_at91rm9200=no])
-
-    AC_ARG_ENABLE([bcm2835gpio],
-      AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
-      [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
   ],
   [
     build_ep93xx=no
     build_at91rm9200=no
-    build_bcm2835gpio=no
 ])
 
 AC_ARG_ENABLE([gw16012],
@@ -318,12 +333,31 @@ AC_ARG_ENABLE([sysfsgpio],
   AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
   [build_sysfsgpio=$enableval], [build_sysfsgpio=no])
 
+AC_ARG_ENABLE([xlnx_pcie_xvc],
+  AS_HELP_STRING([--enable-xlnx-pcie-xvc], [Enable building support for Xilinx XVC/PCIe.]),
+  [build_xlnx_pcie_xvc=$enableval], [build_xlnx_pcie_xvc=no])
+
 AS_CASE([$host_os],
   [linux*], [],
   [
     AS_IF([test "x$build_sysfsgpio" = "xyes"], [
       AC_MSG_ERROR([sysfsgpio is only available on linux])
     ])
+
+    AS_IF([test "x$enable_linuxgpiod" = "xyes"], [
+      AC_MSG_ERROR([linuxgpiod is only available on linux])
+    ])
+
+    AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
+      AC_MSG_ERROR([xlnx_pcie_xvc is only available on linux])
+    ])
+
+    AS_CASE([$host_os], [freebsd*], [],
+    [
+      AS_IF([test "x$build_rshim" = "xyes"], [
+        AC_MSG_ERROR([build_rshim is only available on linux or freebsd])
+      ])
+    ])
 ])
 
 AC_ARG_ENABLE([minidriver_dummy],
@@ -468,6 +502,12 @@ AS_IF([test "x$build_parport" = "xyes"], [
   AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
 ])
 
+AS_IF([test "x$build_rshim" = "xyes"], [
+  AC_DEFINE([BUILD_RSHIM], [1], [1 if you want to debug BlueField SoC via rshim.])
+], [
+  AC_DEFINE([BUILD_RSHIM], [0], [0 if you don't want to debug BlueField SoC via rshim.])
+])
+
 AS_IF([test "x$build_dummy" = "xyes"], [
   build_bitbang=yes
   AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.])
@@ -508,6 +548,13 @@ AS_IF([test "x$build_bcm2835gpio" = "xyes"], [
   AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.])
 ])
 
+AS_IF([test "x$build_imx_gpio" = "xyes"], [
+  build_bitbang=yes
+  AC_DEFINE([BUILD_IMX_GPIO], [1], [1 if you want imx_gpio.])
+], [
+  AC_DEFINE([BUILD_IMX_GPIO], [0], [0 if you don't want imx_gpio.])
+])
+
 AS_IF([test "x$parport_use_ppdev" = "xyes"], [
   AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
 ], [
@@ -526,6 +573,13 @@ AS_IF([test "x$build_jtag_vpi" = "xyes"], [
   AC_DEFINE([BUILD_JTAG_VPI], [0], [0 if you don't want JTAG VPI.])
 ])
 
+AS_IF([test "x$build_jtag_dpi" = "xyes"], [
+  AC_DEFINE([BUILD_JTAG_DPI], [1], [1 if you want JTAG DPI.])
+], [
+  AC_DEFINE([BUILD_JTAG_DPI], [0], [0 if you don't want JTAG DPI.])
+])
+
+
 AS_IF([test "x$build_amtjtagaccel" = "xyes"], [
   AC_DEFINE([BUILD_AMTJTAGACCEL], [1], [1 if you want the Amontec JTAG-Accelerator driver.])
 ], [
@@ -552,7 +606,7 @@ AS_IF([test "x$build_buspirate" = "xyes"], [
 
 AS_IF([test "x$use_internal_jimtcl" = "xyes"], [
   AS_IF([test -f "$srcdir/jimtcl/configure.ac"], [
-    AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim --with-ext="eventloop array clock regexp stdlib tclcompat" --without-ext="default"])
+    AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim])
   ], [
     AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.])
   ])
@@ -572,6 +626,13 @@ AS_IF([test "x$build_sysfsgpio" = "xyes"], [
   AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
 ])
 
+AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
+  build_xlnx_pcie_xvc=yes
+  AC_DEFINE([BUILD_XLNX_PCIE_XVC], [1], [1 if you want the Xilinx XVC/PCIe driver.])
+], [
+  AC_DEFINE([BUILD_XLNX_PCIE_XVC], [0], [0 if you don't want Xilinx XVC/PCIe driver.])
+])
+
 PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
 	use_libusb1=yes
 	AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
@@ -589,6 +650,15 @@ PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
 
 PKG_CHECK_MODULES([LIBUSB0], [libusb], [use_libusb0=yes], [use_libusb0=no])
 
+PKG_CHECK_MODULES([CAPSTONE], [capstone], [have_capstone=yes],
+	[have_capstone=no])
+
+AS_IF([test "x$have_capstone" = "xyes"], [
+  AC_DEFINE([HAVE_CAPSTONE], [1], [1 if you have captone disassembly framework.])
+], [
+  AC_DEFINE([HAVE_CAPSTONE], [0], [0 if you don't have captone disassembly framework.])
+])
+
 for hidapi_lib in hidapi hidapi-hidraw hidapi-libusb; do
 	PKG_CHECK_MODULES([HIDAPI],[$hidapi_lib],[
 		use_hidapi=yes
@@ -602,11 +672,16 @@ PKG_CHECK_MODULES([LIBFTDI], [libftdi1], [use_libftdi=yes], [
 	PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no])
 ])
 
-PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.1],
+PKG_CHECK_MODULES([LIBGPIOD], [libgpiod], [use_libgpiod=yes], [use_libgpiod=no])
+
+PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.2],
 	[use_libjaylink=yes], [use_libjaylink=no])
 
 m4_define([PROCESS_ADAPTERS], [
   m4_foreach([adapter], [$1], [
+	AS_IF([test "x$build_zy1000" = "xyes"], [
+		ADAPTER_VAR([adapter])=no
+	])
 	AS_IF([test $2], [
 		AS_IF([test "x$ADAPTER_VAR([adapter])" != "xno"], [
 			AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).)
@@ -624,11 +699,12 @@ m4_define([PROCESS_ADAPTERS], [
 ])
 
 PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
-PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1])
 PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
 PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
+PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
 PROCESS_ADAPTERS([LIBFTDI_ADAPTERS], ["x$use_libftdi" = "xyes"], [libftdi])
-PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_libusb1" = "xyes" -a "x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libusb-1.x or libjaylink-0.1])
+PROCESS_ADAPTERS([LIBGPIOD_ADAPTERS], ["x$use_libgpiod" = "xyes"], [libgpiod])
+PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libjaylink-0.2])
 
 AS_IF([test "x$build_openjtag" = "xyes"], [
   AS_IF([test "x$use_libusb1" != "xyes" -a "x$use_libusb0" != "xyes"], [
@@ -637,12 +713,20 @@ AS_IF([test "x$build_openjtag" = "xyes"], [
   ])
 ])
 
-AS_IF([test "x$enable_stlink" != "xno" -o "x$enable_ti_icdi" != "xno"], [
+AS_IF([test "x$enable_linuxgpiod" != "xno"], [
+  build_bitbang=yes
+])
+
+AS_IF([test "x$enable_stlink" != "xno" -o "x$enable_ti_icdi" != "xno" -o "x$enable_nulink" != "xno"], [
 	AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.])
+	AM_CONDITIONAL([HLADAPTER], [true])
 ], [
 	AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you want the High Level JTAG driver.])
+	AM_CONDITIONAL([HLADAPTER], [false])
 ])
-AM_CONDITIONAL([HLADAPTER], [test "x$enable_stlink" != "xno" -o "x$enable_ti_icdi" != "xno"])
+AM_CONDITIONAL([HLADAPTER_STLINK], [test "x$enable_stlink" != "xno"])
+AM_CONDITIONAL([HLADAPTER_ICDI], [test "x$enable_ti_icdi" != "xno"])
+AM_CONDITIONAL([HLADAPTER_NULINK], [test "x$enable_nulink" != "xno"])
 
 AS_IF([test "x$enable_jlink" != "xno"], [
   AS_IF([test "x$use_internal_libjaylink" = "xyes"], [
@@ -670,8 +754,10 @@ AM_CONDITIONAL([ZY1000_MASTER], [test "x$build_zy1000_master" = "xyes"])
 AM_CONDITIONAL([IOUTIL], [test "x$build_ioutil" = "xyes"])
 AM_CONDITIONAL([AT91RM9200], [test "x$build_at91rm9200" = "xyes"])
 AM_CONDITIONAL([BCM2835GPIO], [test "x$build_bcm2835gpio" = "xyes"])
+AM_CONDITIONAL([IMX_GPIO], [test "x$build_imx_gpio" = "xyes"])
 AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"])
 AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes" -o "x$build_jtag_vpi" = "xyes"])
+AM_CONDITIONAL([JTAG_DPI], [test "x$build_jtag_dpi" = "xyes" -o "x$build_jtag_dpi" = "xyes"])
 AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"])
 AM_CONDITIONAL([AMTJTAGACCEL], [test "x$build_amtjtagaccel" = "xyes"])
 AM_CONDITIONAL([GW16012], [test "x$build_gw16012" = "xyes"])
@@ -679,6 +765,7 @@ AM_CONDITIONAL([OOCD_TRACE], [test "x$build_oocd_trace" = "xyes"])
 AM_CONDITIONAL([REMOTE_BITBANG], [test "x$build_remote_bitbang" = "xyes"])
 AM_CONDITIONAL([BUSPIRATE], [test "x$build_buspirate" = "xyes"])
 AM_CONDITIONAL([SYSFSGPIO], [test "x$build_sysfsgpio" = "xyes"])
+AM_CONDITIONAL([XLNX_PCIE_XVC], [test "x$build_xlnx_pcie_xvc" = "xyes"])
 AM_CONDITIONAL([USE_LIBUSB0], [test "x$use_libusb0" = "xyes"])
 AM_CONDITIONAL([USE_LIBUSB1], [test "x$use_libusb1" = "xyes"])
 AM_CONDITIONAL([IS_CYGWIN], [test "x$is_cygwin" = "xyes"])
@@ -687,8 +774,11 @@ AM_CONDITIONAL([IS_WIN32], [test "x$is_win32" = "xyes"])
 AM_CONDITIONAL([IS_DARWIN], [test "x$is_darwin" = "xyes"])
 AM_CONDITIONAL([BITQ], [test "x$build_bitq" = "xyes"])
 AM_CONDITIONAL([USE_LIBFTDI], [test "x$use_libftdi" = "xyes"])
+AM_CONDITIONAL([USE_LIBGPIOD], [test "x$use_libgpiod" = "xyes"])
 AM_CONDITIONAL([USE_HIDAPI], [test "x$use_hidapi" = "xyes"])
 AM_CONDITIONAL([USE_LIBJAYLINK], [test "x$use_libjaylink" = "xyes"])
+AM_CONDITIONAL([RSHIM], [test "x$build_rshim" = "xyes"])
+AM_CONDITIONAL([HAVE_CAPSTONE], [test "x$have_capstone" = "xyes"])
 
 AM_CONDITIONAL([MINIDRIVER], [test "x$build_minidriver" = "xyes"])
 AM_CONDITIONAL([MINIDRIVER_DUMMY], [test "x$build_minidriver_dummy" = "xyes"])
@@ -741,7 +831,7 @@ AS_IF([test "x${gcc_werror}" = "xyes"], [
   GCC_WARNINGS="${GCC_WARNINGS} -Werror"
 ])
 
-# overide default gcc cflags
+# override default gcc cflags
 AS_IF([test "x$gcc_warnings" = "xyes"], [
   AC_SUBST([GCC_WARNINGS], [$GCC_WARNINGS])
 ])
@@ -755,8 +845,10 @@ echo
 echo
 echo OpenOCD configuration summary
 echo --------------------------------------------------
-m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
-	HIDAPI_ADAPTERS, LIBFTDI_ADAPTERS, LIBJAYLINK_ADAPTERS],
+m4_foreach([adapter], [USB1_ADAPTERS, USB0_ADAPTERS,
+	HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
+	LIBGPIOD_ADAPTERS,
+	LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS],
 	[s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))
 	AS_CASE([$ADAPTER_VAR([adapter])],
 		[auto], [