X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=configure.ac;h=51d43baacde696bf285bec8aaf2dbf90c28ee4e8;hp=d0386bcfe1ad89fea298d1362af51f0c0a32ed99;hb=cf1418e9a85013bbf8dbcc2d2e9985695993d9f4;hpb=cf692abe83a90f74cb21b1864f348cd52fe26454

diff --git a/configure.ac b/configure.ac
index d0386bcfe1..51d43baacd 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,16 +1,17 @@
 AC_PREREQ(2.60)
-AC_INIT([openocd], [0.6.0-dev],
+AC_INIT([openocd], [0.7.0-dev],
   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])
 
-m4_include(config_subdir.m4)dnl
+m4_include([config_subdir.m4])dnl
 
 AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip])
 AM_MAINTAINER_MODE
 
-AM_CONFIG_HEADER(config.h)
+AM_CONFIG_HEADER([config.h])
 AH_BOTTOM([
 #include <helper/system.h>
+#include <helper/types.h>
 #include <helper/replacements.h>
 ])
 
@@ -26,19 +27,17 @@ m4_defun([_LT_AC_LANG_F77_CONFIG], [:])
 m4_defun([_LT_AC_LANG_GCJ_CONFIG], [:])
 AC_DISABLE_SHARED
 AC_PROG_LIBTOOL
-AC_SUBST(LIBTOOL_DEPS)
-
+AC_SUBST([LIBTOOL_DEPS])
 
 dnl configure checks required for Jim files (these are obsolete w/ C99)
 AC_C_CONST
 AC_TYPE_LONG_LONG_INT
 
-
 AC_SEARCH_LIBS([ioperm], [ioperm])
 AC_SEARCH_LIBS([dlopen], [dl])
 
-AC_CHECK_HEADERS(sys/socket.h)
-AC_CHECK_HEADERS(arpa/inet.h, [], [], [dnl
+AC_CHECK_HEADERS([sys/socket.h])
+AC_CHECK_HEADERS([arpa/inet.h], [], [], [dnl
 #include <stdio.h>
 #ifdef STDC_HEADERS
 # include <stdlib.h>
@@ -52,10 +51,10 @@ AC_CHECK_HEADERS(arpa/inet.h, [], [], [dnl
 # include <sys/socket.h>
 #endif
 ])
-AC_CHECK_HEADERS(elf.h)
-AC_CHECK_HEADERS(dirent.h)
-AC_CHECK_HEADERS(fcntl.h)
-AC_CHECK_HEADERS(ifaddrs.h, [], [], [dnl
+AC_CHECK_HEADERS([elf.h])
+AC_CHECK_HEADERS([dirent.h])
+AC_CHECK_HEADERS([fcntl.h])
+AC_CHECK_HEADERS([ifaddrs.h], [], [], [dnl
 #include <stdio.h>
 #ifdef STDC_HEADERS
 # include <stdlib.h>
@@ -69,8 +68,8 @@ AC_CHECK_HEADERS(ifaddrs.h, [], [], [dnl
 # include <sys/socket.h>
 #endif
 ])
-AC_CHECK_HEADERS(malloc.h)
-AC_CHECK_HEADERS(netdb.h)
+AC_CHECK_HEADERS([malloc.h])
+AC_CHECK_HEADERS([netdb.h])
 AC_CHECK_HEADERS([netinet/in.h], [], [], [dnl
 #include <stdio.h>
 #ifdef STDC_HEADERS
@@ -85,7 +84,7 @@ AC_CHECK_HEADERS([netinet/in.h], [], [], [dnl
 # include <sys/socket.h>
 #endif
 ])
-AC_CHECK_HEADERS(netinet/tcp.h, [], [], [dnl
+AC_CHECK_HEADERS([netinet/tcp.h], [], [], [dnl
 #include <stdio.h>
 #ifdef STDC_HEADERS
 # include <stdlib.h>
@@ -99,16 +98,16 @@ AC_CHECK_HEADERS(netinet/tcp.h, [], [], [dnl
 # include <sys/socket.h>
 #endif
 ])
-AC_CHECK_HEADERS(pthread.h)
-AC_CHECK_HEADERS(strings.h)
-AC_CHECK_HEADERS(sys/ioctl.h)
-AC_CHECK_HEADERS(sys/param.h)
-AC_CHECK_HEADERS(sys/poll.h)
-AC_CHECK_HEADERS(sys/select.h)
-AC_CHECK_HEADERS(sys/stat.h)
-AC_CHECK_HEADERS(sys/time.h)
-AC_CHECK_HEADERS(sys/types.h)
-AC_CHECK_HEADERS(unistd.h)
+AC_CHECK_HEADERS([pthread.h])
+AC_CHECK_HEADERS([strings.h])
+AC_CHECK_HEADERS([sys/ioctl.h])
+AC_CHECK_HEADERS([sys/param.h])
+AC_CHECK_HEADERS([sys/poll.h])
+AC_CHECK_HEADERS([sys/select.h])
+AC_CHECK_HEADERS([sys/stat.h])
+AC_CHECK_HEADERS([sys/time.h])
+AC_CHECK_HEADERS([sys/types.h])
+AC_CHECK_HEADERS([unistd.h])
 AC_CHECK_HEADERS([net/if.h], [], [], [dnl
 #include <stdio.h>
 #ifdef STDC_HEADERS
@@ -130,11 +129,11 @@ AC_HEADER_TIME
 
 AC_C_BIGENDIAN
 
-AC_CHECK_FUNCS(strndup)
-AC_CHECK_FUNCS(strnlen)
-AC_CHECK_FUNCS(gettimeofday)
-AC_CHECK_FUNCS(usleep)
-AC_CHECK_FUNCS(vasprintf)
+AC_CHECK_FUNCS([strndup])
+AC_CHECK_FUNCS([strnlen])
+AC_CHECK_FUNCS([gettimeofday])
+AC_CHECK_FUNCS([usleep])
+AC_CHECK_FUNCS([vasprintf])
 
 build_bitbang=no
 build_bitq=no
@@ -150,7 +149,7 @@ if test -x $srcdir/guess-rev.sh ; then
 else
   build_release=yes
 fi
-AC_MSG_RESULT($build_release)
+AC_MSG_RESULT([$build_release])
 
 # We are not *ALWAYS* being installed in the standard place.
 # We may be installed in a "tool-build" specific location.
@@ -225,7 +224,7 @@ __EOF__
 # In case (1) and (2) we need to know where the package was unpacked.
 
 AC_ARG_WITH(ftd2xx-win32-zipdir,
-  AS_HELP_STRING([--with-ftd2xx-win32-zipdir],[Where (CYGWIN/MINGW) the zip file from ftdichip.com was unpacked <default=search>]),
+  AS_HELP_STRING([--with-ftd2xx-win32-zipdir],[Where (CYGWIN/MINGW) the zip file from ftdichip.com was unpacked (default=search)]),
   [
   # option present
   if test -d $with_ftd2xx_win32_zipdir
@@ -238,7 +237,7 @@ AC_ARG_WITH(ftd2xx-win32-zipdir,
   ], [true])
 
 AC_ARG_WITH(ftd2xx-linux-tardir,
-  AS_HELP_STRING([--with-ftd2xx-linux-tardir], [Where (Linux/Unix) the tar file from ftdichip.com was unpacked <default=search>]),
+  AS_HELP_STRING([--with-ftd2xx-linux-tardir], [Where (Linux/Unix) the tar file from ftdichip.com was unpacked (default=search)]),
   [
   # Option present
   if test $is_win32 = yes ; then
@@ -255,7 +254,7 @@ AC_ARG_WITH(ftd2xx-linux-tardir,
 
 AC_ARG_WITH(ftd2xx-lib,
   AS_HELP_STRING([--with-ftd2xx-lib],
-    [Use static or shared ftd2xx libs on default static]),
+    [Use static or shared ftd2xx libs (default=static)]),
   [
   case "$withval" in
   static)
@@ -273,33 +272,31 @@ AC_ARG_WITH(ftd2xx-lib,
   with_ftd2xx_lib=static
   ])
 
-
-AC_ARG_ENABLE(doxygen-html,
+AC_ARG_ENABLE([doxygen-html],
   AS_HELP_STRING([--disable-doxygen-html],
     [Disable building Doxygen manual as HTML.]),
   [doxygen_as_html=$enableval], [doxygen_as_html=yes])
-AC_SUBST(doxygen_as_html)
+AC_SUBST([doxygen_as_html])
 AC_MSG_CHECKING([whether to build Doxygen as HTML])
-AC_MSG_RESULT($doxygen_as_html)
+AC_MSG_RESULT([$doxygen_as_html])
 
-AC_ARG_ENABLE(doxygen-pdf,
+AC_ARG_ENABLE([doxygen-pdf],
   AS_HELP_STRING([--enable-doxygen-pdf],
     [Enable building Doxygen manual as PDF.]),
   [doxygen_as_pdf=$enableval], [doxygen_as_pdf=no])
-AC_SUBST(doxygen_as_pdf)
+AC_SUBST([doxygen_as_pdf])
 AC_MSG_CHECKING([whether to build Doxygen as PDF])
-AC_MSG_RESULT($doxygen_as_pdf)
+AC_MSG_RESULT([$doxygen_as_pdf])
 
-
-AC_ARG_ENABLE(gccwarnings,
+AC_ARG_ENABLE([gccwarnings],
   AS_HELP_STRING([--disable-gccwarnings], [Disable compiler warnings]),
   [gcc_warnings=$enableval], [gcc_warnings=yes])
 
-AC_ARG_ENABLE(wextra,
+AC_ARG_ENABLE([wextra],
   AS_HELP_STRING([--disable-wextra], [Disable extra compiler warnings]),
   [gcc_wextra=$enableval], [gcc_wextra=$gcc_warnings])
 
-AC_ARG_ENABLE(werror,
+AC_ARG_ENABLE([werror],
   AS_HELP_STRING([--disable-werror], [Do not treat warnings as errors]),
   [gcc_werror=$enableval], [gcc_werror=$gcc_warnings])
 
@@ -308,7 +305,7 @@ debug_jtag_io=no
 debug_usb_io=no
 debug_usb_comms=no
 
-AC_ARG_ENABLE(verbose,
+AC_ARG_ENABLE([verbose],
   AS_HELP_STRING([--enable-verbose],
       [Enable verbose JTAG I/O messages (for debugging).]),
   [
@@ -317,112 +314,112 @@ AC_ARG_ENABLE(verbose,
   debug_usb_comms=$enableval
   ], [])
 
-AC_ARG_ENABLE(verbose_jtag_io,
+AC_ARG_ENABLE([verbose_jtag_io],
   AS_HELP_STRING([--enable-verbose-jtag-io],
       [Enable verbose JTAG I/O messages (for debugging).]),
   [debug_jtag_io=$enableval], [])
-AC_ARG_ENABLE(verbose_usb_io,
+
+AC_ARG_ENABLE([verbose_usb_io],
   AS_HELP_STRING([--enable-verbose-usb-io],
       [Enable verbose USB I/O messages (for debugging)]),
   [debug_usb_io=$enableval], [])
-AC_ARG_ENABLE(verbose_usb_comms,
+
+AC_ARG_ENABLE([verbose_usb_comms],
   AS_HELP_STRING([--enable-verbose-usb-comms],
       [Enable verbose USB communication messages (for debugging)]),
   [debug_usb_comms=$enableval], [])
 
 AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]);
-AC_MSG_RESULT($debug_jtag_io)
+AC_MSG_RESULT([$debug_jtag_io])
 if test $debug_jtag_io = yes; then
   AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages])
 fi
 
 AC_MSG_CHECKING([whether to enable verbose USB I/O messages]);
-AC_MSG_RESULT($debug_usb_io)
+AC_MSG_RESULT([$debug_usb_io])
 if test $debug_usb_io = yes; then
   AC_DEFINE([_DEBUG_USB_IO_],[1], [Print verbose USB I/O messages])
 fi
 
 AC_MSG_CHECKING([whether to enable verbose USB communication messages]);
-AC_MSG_RESULT($debug_usb_comms)
+AC_MSG_RESULT([$debug_usb_comms])
 if test $debug_usb_comms = yes; then
   AC_DEFINE([_DEBUG_USB_COMMS_],[1], [Print verbose USB communication messages])
 fi
 
-
 debug_malloc=no
-AC_ARG_ENABLE(malloc_logging,
+AC_ARG_ENABLE([malloc_logging],
   AS_HELP_STRING([--enable-malloc-logging],
       [Include free space in logging messages (requires malloc.h).]),
   [debug_malloc=$enableval], [])
 
 AC_MSG_CHECKING([whether to enable malloc free space logging]);
-AC_MSG_RESULT($debug_malloc)
+AC_MSG_RESULT([$debug_malloc])
 if test $debug_malloc = yes; then
   AC_DEFINE([_DEBUG_FREE_SPACE_],[1], [Include malloc free space in logging])
 fi
 
-
-AC_ARG_ENABLE(dummy,
+AC_ARG_ENABLE([dummy],
   AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
   [build_dummy=$enableval], [build_dummy=no])
 
-AC_ARG_ENABLE(parport,
+AC_ARG_ENABLE([parport],
   AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]),
   [build_parport=$enableval], [build_parport=no])
 
-AC_ARG_ENABLE(parport_ppdev,
+AC_ARG_ENABLE([parport_ppdev],
   AS_HELP_STRING([--disable-parport-ppdev],
       [Disable use of ppdev (/dev/parportN) for parport (for x86 only)]),
     [parport_use_ppdev=$enableval], [parport_use_ppdev=yes])
 
-AC_ARG_ENABLE(parport_giveio,
+AC_ARG_ENABLE([parport_giveio],
     AS_HELP_STRING([--enable-parport-giveio],
       [Enable use of giveio for parport (for CygWin only)]),
     [parport_use_giveio=$enableval], [parport_use_giveio=])
 
-AC_ARG_ENABLE(ft2232_libftdi,
+AC_ARG_ENABLE([ft2232_libftdi],
   AS_HELP_STRING([--enable-ft2232_libftdi], [Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX]),
   [build_ft2232_libftdi=$enableval], [build_ft2232_libftdi=no])
 
-AC_ARG_ENABLE(ft2232_ftd2xx,
+AC_ARG_ENABLE([ft2232_ftd2xx],
   AS_HELP_STRING([--enable-ft2232_ftd2xx], [Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com]),
   [build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no])
 
-AC_ARG_ENABLE(usb_blaster_libftdi,
+AC_ARG_ENABLE([ftdi],
+  AS_HELP_STRING([--enable-ftdi], [Enable building support for the MPSSE mode of FTDI based devices, using libusb-1.0 in asynchronous mode]),
+  [build_ftdi=$enableval], [build_ftdi=no])
+
+AC_ARG_ENABLE([usb_blaster_libftdi],
   AS_HELP_STRING([--enable-usb_blaster_libftdi], [Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX]),
   [build_usb_blaster_libftdi=$enableval], [build_usb_blaster_libftdi=no])
 
-AC_ARG_ENABLE(usb_blaster_ftd2xx,
+AC_ARG_ENABLE([usb_blaster_ftd2xx],
   AS_HELP_STRING([--enable-usb_blaster_ftd2xx], [Enable building support for the Altera USB-Blaster using the FTD2XX driver from ftdichip.com]),
   [build_usb_blaster_ftd2xx=$enableval], [build_usb_blaster_ftd2xx=no])
 
-AC_ARG_ENABLE(amtjtagaccel,
+AC_ARG_ENABLE([amtjtagaccel],
   AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
   [build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
 
-AC_ARG_ENABLE(ecosboard,
-  AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]),
-  [build_ecosboard=$enableval], [build_ecosboard=no])
-
-AC_ARG_ENABLE(zy1000_master,
+AC_ARG_ENABLE([zy1000_master],
   AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]),
   [build_zy1000_master=$enableval], [build_zy1000_master=no])
 
-AC_ARG_ENABLE(zy1000,
+AC_ARG_ENABLE([zy1000],
   AS_HELP_STRING([--enable-zy1000], [Enable ZY1000 interface]),
   [build_zy1000=$enableval], [build_zy1000=no])
 
-AC_ARG_ENABLE(ioutil,
+AC_ARG_ENABLE([ioutil],
   AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
   [build_ioutil=$enableval], [build_ioutil=no])
 
 case "${host_cpu}" in
   arm*)
-    AC_ARG_ENABLE(ep93xx,
+    AC_ARG_ENABLE([ep93xx],
       AS_HELP_STRING([--enable-ep93xx], [Enable building support for EP93xx based SBCs]),
       [build_ep93xx=$enableval], [build_ep93xx=no])
 
-    AC_ARG_ENABLE(at91rm9200,
+    AC_ARG_ENABLE([at91rm9200],
       AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
       [build_at91rm9200=$enableval], [build_at91rm9200=no])
     ;;
@@ -433,87 +430,110 @@ case "${host_cpu}" in
     ;;
 esac
 
-AC_ARG_ENABLE(gw16012,
+AC_ARG_ENABLE([gw16012],
   AS_HELP_STRING([--enable-gw16012], [Enable building support for the Gateworks GW16012 JTAG Programmer]),
   [build_gw16012=$enableval], [build_gw16012=no])
 
-AC_ARG_ENABLE(presto_libftdi,
+AC_ARG_ENABLE([presto_libftdi],
   AS_HELP_STRING([--enable-presto_libftdi], [Enable building support for ASIX Presto Programmer using the libftdi driver]),
   [build_presto_libftdi=$enableval], [build_presto_libftdi=no])
 
-AC_ARG_ENABLE(presto_ftd2xx,
+AC_ARG_ENABLE([presto_ftd2xx],
   AS_HELP_STRING([--enable-presto_ftd2xx], [Enable building support for ASIX Presto Programmer using the FTD2XX driver]),
   [build_presto_ftd2xx=$enableval], [build_presto_ftd2xx=no])
 
-AC_ARG_ENABLE(usbprog,
+AC_ARG_ENABLE([usbprog],
   AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]),
   [build_usbprog=$enableval], [build_usbprog=no])
 
-AC_ARG_ENABLE(oocd_trace,
+AC_ARG_ENABLE([oocd_trace],
   AS_HELP_STRING([--enable-oocd_trace],
   [Enable building support for some prototype OpenOCD+trace ETM capture hardware]),
   [build_oocd_trace=$enableval], [build_oocd_trace=no])
 
-AC_ARG_ENABLE(jlink,
+AC_ARG_ENABLE([jlink],
   AS_HELP_STRING([--enable-jlink], [Enable building support for the Segger J-Link JTAG Programmer]),
   [build_jlink=$enableval], [build_jlink=no])
 
-AC_ARG_ENABLE(vsllink,
+AC_ARG_ENABLE([vsllink],
   AS_HELP_STRING([--enable-vsllink], [Enable building support for the Versaloon-Link JTAG Programmer]),
   [build_vsllink=$enableval], [build_vsllink=no])
 
-AC_ARG_ENABLE(rlink,
+AC_ARG_ENABLE([rlink],
   AS_HELP_STRING([--enable-rlink], [Enable building support for the Raisonance RLink JTAG Programmer]),
   [build_rlink=$enableval], [build_rlink=no])
 
-AC_ARG_ENABLE(ulink,
+AC_ARG_ENABLE([ulink],
   AS_HELP_STRING([--enable-ulink], [Enable building support for the Keil ULINK JTAG Programmer]),
   [build_ulink=$enableval], [build_ulink=no])
 
-AC_ARG_ENABLE(arm-jtag-ew,
+AC_ARG_ENABLE([arm-jtag-ew],
   AS_HELP_STRING([--enable-arm-jtag-ew], [Enable building support for the Olimex ARM-JTAG-EW Programmer]),
   [build_armjtagew=$enableval], [build_armjtagew=no])
 
-AC_ARG_ENABLE(buspirate,
+AC_ARG_ENABLE([buspirate],
   AS_HELP_STRING([--enable-buspirate], [Enable building support for the Buspirate]),
   [build_buspirate=$enableval], [build_buspirate=no])
 
-AC_ARG_ENABLE(minidriver_dummy,
+AC_ARG_ENABLE([stlink],
+  AS_HELP_STRING([--enable-stlink], [Enable building support for the ST-Link JTAG Programmer]),
+  [build_hladapter_stlink=$enableval], [build_hladapter_stlink=no])
+
+AC_ARG_ENABLE([ti-icdi],
+  AS_HELP_STRING([--enable-ti-icdi], [Enable building support for the TI ICDI JTAG Programmer]),
+  [build_hladapter_icdi=$enableval], [build_hladapter_icdi=no])
+
+AC_ARG_ENABLE([osbdm],
+  AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]),
+  [build_osbdm=$enableval], [build_osbdm=no])
+
+AC_ARG_ENABLE([opendous],
+  AS_HELP_STRING([--enable-opendous], [Enable building support for the estick/opendous JTAG Programmer]),
+  [build_opendous=$enableval], [build_opendous=no])
+
+AC_ARG_ENABLE([sysfsgpio],
+  AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
+  [build_sysfsgpio=$enableval], [build_sysfsgpio=no])
+
+AC_ARG_ENABLE([minidriver_dummy],
   AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
   [build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
 
-AC_ARG_ENABLE(internal-jimtcl,
+AC_ARG_ENABLE([internal-jimtcl],
   AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]),
   [use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes])
 
+AC_ARG_ENABLE([libusb0],
+  AS_HELP_STRING([--enable-libusb0], [Use libusb-0.1 library for USB JTAG devices]),
+  [check_libusb0=$enableval], [check_libusb0=no])
+
 build_minidriver=no
 AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
 if test $build_zy1000 = yes; then
   if test $build_minidriver = yes; then
     AC_MSG_ERROR([Multiple minidriver options have been enabled.])
   fi
-  AC_DEFINE(HAVE_JTAG_MINIDRIVER_H, 1,
+  AC_DEFINE([HAVE_JTAG_MINIDRIVER_H], [1],
       [Define to 1 if you have the <jtag_minidriver.h> header file.])
   build_minidriver=yes
 fi
-AC_MSG_RESULT($build_zy1000)
+AC_MSG_RESULT([$build_zy1000])
 
-AC_ARG_ENABLE(remote-bitbang,
+AC_ARG_ENABLE([remote-bitbang],
   AS_HELP_STRING([--enable-remote-bitbang], [Enable building support for the Remote Bitbang jtag driver]),
   [build_remote_bitbang=$enableval], [build_remote_bitbang=no])
 
-
 AC_MSG_CHECKING([whether to enable dummy minidriver])
 if test $build_minidriver_dummy = yes; then
   if test $build_minidriver = yes; then
     AC_MSG_ERROR([Multiple minidriver options have been enabled.])
   fi
   build_minidriver=yes
-  AC_DEFINE(BUILD_MINIDRIVER_DUMMY, 1, [Use the dummy minidriver.])
-  AC_DEFINE(HAVE_JTAG_MINIDRIVER_H, 1,
+  AC_DEFINE([BUILD_MINIDRIVER_DUMMY], [1], [Use the dummy minidriver.])
+  AC_DEFINE([HAVE_JTAG_MINIDRIVER_H], [1],
       [Define to 1 if you have the <jtag_minidriver.h> header file.])
 fi
-AC_MSG_RESULT($build_minidriver_dummy)
+AC_MSG_RESULT([$build_minidriver_dummy])
 
 AC_MSG_CHECKING([whether standard drivers can be built])
 if test "$build_minidriver" = yes; then
@@ -543,7 +563,7 @@ case $host in
     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [[return __MINGW32__;]])],
       [is_mingw=yes],[is_mingw=no])
     if test $is_mingw = yes; then
-      AC_DEFINE(IS_MINGW, 1, [1 if building for MinGW.])
+      AC_DEFINE([IS_MINGW], [1], [1 if building for MinGW.])
       if test x$parport_use_giveio = xno; then
         AC_MSG_WARN([--disable-parport-giveio is not supported by MinGW32 hosts])
       fi
@@ -551,15 +571,15 @@ case $host in
       is_cygwin=no
     else
       is_cygwin=yes
-      AC_DEFINE(IS_CYGWIN, 1, [1 if building for Cygwin.])
+      AC_DEFINE([IS_CYGWIN], [1], [1 if building for Cygwin.])
       # sys/io.h needed under cygwin for parport access
       if test $build_parport = yes; then
-        AC_CHECK_HEADERS(sys/io.h,[],AC_MSG_ERROR([Please install the cygwin ioperm package]))
+        AC_CHECK_HEADERS([sys/io.h],[],AC_MSG_ERROR([Please install the cygwin ioperm package]))
       fi
     fi
 
-    AC_DEFINE(IS_WIN32, 1, [1 if building for Win32.])
-    AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.])
+    AC_DEFINE([IS_WIN32], [1], [1 if building for Win32.])
+    AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
     ;;
   *-mingw*)
     is_mingw=yes
@@ -577,9 +597,9 @@ case $host in
 
     CFLAGS="$CFLAGS -D__USE_MINGW_ANSI_STDIO"
 
-    AC_DEFINE(IS_MINGW, 1, [1 if building for MinGW.])
-    AC_DEFINE(IS_WIN32, 1, [1 if building for Win32.])
-    AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.])
+    AC_DEFINE([IS_MINGW], [1], [1 if building for MinGW.])
+    AC_DEFINE([IS_WIN32], [1], [1 if building for Win32.])
+    AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
     ;;
   *darwin*)
     is_darwin=yes
@@ -589,189 +609,207 @@ case $host in
     fi
     parport_use_giveio=no
 
-    AC_DEFINE(IS_CYGWIN, 0, [0 if not building for Cygwin.])
-    AC_DEFINE(IS_WIN32, 0, [0 if not building for Win32.])
-    AC_DEFINE(IS_DARWIN, 1, [1 if building for Darwin.])
+    AC_DEFINE([IS_CYGWIN], [0], [0 if not building for Cygwin.])
+    AC_DEFINE([IS_WIN32], [0], [0 if not building for Win32.])
+    AC_DEFINE([IS_DARWIN], [1], [1 if building for Darwin.])
     ;;
   *)
     if test x$parport_use_giveio = xyes; then
       AC_MSG_WARN([--enable-parport-giveio cannot be used by ]$host[ hosts])
     fi
     parport_use_giveio=no
-    AC_DEFINE(IS_CYGWIN, 0, [0 if not building for Cygwin.])
-    AC_DEFINE(IS_WIN32, 0, [0 if not building for Win32.])
-    AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.])
+    AC_DEFINE([IS_CYGWIN], [0], [0 if not building for Cygwin.])
+    AC_DEFINE([IS_WIN32], [0], [0 if not building for Win32.])
+    AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
     ;;
 esac
 
 if test $build_parport = yes; then
   build_bitbang=yes
-  AC_DEFINE(BUILD_PARPORT, 1, [1 if you want parport.])
+  AC_DEFINE([BUILD_PARPORT], [1], [1 if you want parport.])
 else
-  AC_DEFINE(BUILD_PARPORT, 0, [0 if you don't want parport.])
+  AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
 fi
 
 if test $build_dummy = yes; then
   build_bitbang=yes
-  AC_DEFINE(BUILD_DUMMY, 1, [1 if you want dummy driver.])
+  AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.])
 else
-  AC_DEFINE(BUILD_DUMMY, 0, [0 if you don't want dummy driver.])
+  AC_DEFINE([BUILD_DUMMY], [0], [0 if you don't want dummy driver.])
 fi
 
 if test $build_ep93xx = yes; then
   build_bitbang=yes
-  AC_DEFINE(BUILD_EP93XX, 1, [1 if you want ep93xx.])
-else
-  AC_DEFINE(BUILD_EP93XX, 0, [0 if you don't want ep93xx.])
-fi
-
-if test $build_ecosboard = yes; then
-  AC_DEFINE(BUILD_ECOSBOARD, 1, [1 if you want eCosBoard.])
+  AC_DEFINE([BUILD_EP93XX], [1], [1 if you want ep93xx.])
 else
-  AC_DEFINE(BUILD_ECOSBOARD, 0, [0 if you don't want eCosBoard.])
+  AC_DEFINE([BUILD_EP93XX], [0], [0 if you don't want ep93xx.])
 fi
 
 if test $build_zy1000 = yes; then
-  AC_DEFINE(BUILD_ZY1000, 1, [1 if you want ZY1000.])
+  AC_DEFINE([BUILD_ZY1000], [1], [1 if you want ZY1000.])
 else
-  AC_DEFINE(BUILD_ZY1000, 0, [0 if you don't want ZY1000.])
+  AC_DEFINE([BUILD_ZY1000], [0], [0 if you don't want ZY1000.])
 fi
 
 if test $build_zy1000_master = yes; then
-  AC_DEFINE(BUILD_ZY1000_MASTER, 1, [1 if you want ZY1000 JTAG master registers.])
+  AC_DEFINE([BUILD_ZY1000_MASTER], [1], [1 if you want ZY1000 JTAG master registers.])
 else
-  AC_DEFINE(BUILD_ZY1000_MASTER, 0, [0 if you don't want ZY1000 JTAG master registers.])
+  AC_DEFINE([BUILD_ZY1000_MASTER], [0], [0 if you don't want ZY1000 JTAG master registers.])
 fi
 
 if test $build_at91rm9200 = yes; then
   build_bitbang=yes
-  AC_DEFINE(BUILD_AT91RM9200, 1, [1 if you want at91rm9200.])
+  AC_DEFINE([BUILD_AT91RM9200], [1], [1 if you want at91rm9200.])
 else
-  AC_DEFINE(BUILD_AT91RM9200, 0, [0 if you don't want at91rm9200.])
+  AC_DEFINE([BUILD_AT91RM9200], [0], [0 if you don't want at91rm9200.])
 fi
 
 if test x$parport_use_ppdev = xyes; then
-  AC_DEFINE(PARPORT_USE_PPDEV, 1, [1 if you want parport to use ppdev.])
+  AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
 else
-  AC_DEFINE(PARPORT_USE_PPDEV, 0, [0 if you don't want parport to use ppdev.])
+  AC_DEFINE([PARPORT_USE_PPDEV], [0], [0 if you don't want parport to use ppdev.])
 fi
 
 if test x$parport_use_giveio = xyes; then
-  AC_DEFINE(PARPORT_USE_GIVEIO, 1, [1 if you want parport to use giveio.])
+  AC_DEFINE([PARPORT_USE_GIVEIO], [1], [1 if you want parport to use giveio.])
 else
-  AC_DEFINE(PARPORT_USE_GIVEIO, 0, [0 if you don't want parport to use giveio.])
+  AC_DEFINE([PARPORT_USE_GIVEIO], [0], [0 if you don't want parport to use giveio.])
 fi
 
 if test $build_bitbang = yes; then
-  AC_DEFINE(BUILD_BITBANG, 1, [1 if you want a bitbang interface.])
+  AC_DEFINE([BUILD_BITBANG], [1], [1 if you want a bitbang interface.])
 else
-  AC_DEFINE(BUILD_BITBANG, 0, [0 if you don't want a bitbang interface.])
+  AC_DEFINE([BUILD_BITBANG], [0], [0 if you don't want a bitbang interface.])
 fi
 
 if test $build_ft2232_libftdi = yes; then
-  AC_DEFINE(BUILD_FT2232_LIBFTDI, 1, [1 if you want libftdi ft2232.])
+  AC_DEFINE([BUILD_FT2232_LIBFTDI], [1], [1 if you want libftdi ft2232.])
 else
-  AC_DEFINE(BUILD_FT2232_LIBFTDI, 0, [0 if you don't want libftdi ft2232.])
+  AC_DEFINE([BUILD_FT2232_LIBFTDI], [0], [0 if you don't want libftdi ft2232.])
 fi
 
 if test $build_ft2232_ftd2xx = yes; then
-  AC_DEFINE(BUILD_FT2232_FTD2XX, 1, [1 if you want ftd2xx ft2232.])
+  AC_DEFINE([BUILD_FT2232_FTD2XX], [1], [1 if you want ftd2xx ft2232.])
+else
+  AC_DEFINE([BUILD_FT2232_FTD2XX], [0], [0 if you don't want ftd2xx ft2232.])
+fi
+
+if test $build_ftdi = yes; then
+  AC_DEFINE([BUILD_FTDI], [1], [1 if you want ftdi.])
 else
-  AC_DEFINE(BUILD_FT2232_FTD2XX, 0, [0 if you don't want ftd2xx ft2232.])
+  AC_DEFINE([BUILD_FTDI], [0], [0 if you don't want ftdi.])
 fi
 
 if test $build_usb_blaster_libftdi = yes; then
   build_bitbang=yes
-  AC_DEFINE(BUILD_USB_BLASTER_LIBFTDI, 1, [1 if you want libftdi usb_blaster.])
+  AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [1], [1 if you want libftdi usb_blaster.])
 else
-  AC_DEFINE(BUILD_USB_BLASTER_LIBFTDI, 0, [0 if you don't want libftdi usb_blaster.])
+  AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [0], [0 if you don't want libftdi usb_blaster.])
 fi
 
 if test $build_usb_blaster_ftd2xx = yes; then
   build_bitbang=yes
-  AC_DEFINE(BUILD_USB_BLASTER_FTD2XX, 1, [1 if you want ftd2xx usb_blaster.])
+  AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [1], [1 if you want ftd2xx usb_blaster.])
 else
-  AC_DEFINE(BUILD_USB_BLASTER_FTD2XX, 0, [0 if you don't want ftd2xx usb_blaster.])
+  AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [0], [0 if you don't want ftd2xx usb_blaster.])
 fi
 
 if test $build_amtjtagaccel = yes; then
-  AC_DEFINE(BUILD_AMTJTAGACCEL, 1, [1 if you want the Amontec JTAG-Accelerator driver.])
+  AC_DEFINE([BUILD_AMTJTAGACCEL], [1], [1 if you want the Amontec JTAG-Accelerator driver.])
 else
-  AC_DEFINE(BUILD_AMTJTAGACCEL, 0, [0 if you don't want the Amontec JTAG-Accelerator driver.])
+  AC_DEFINE([BUILD_AMTJTAGACCEL], [0], [0 if you don't want the Amontec JTAG-Accelerator driver.])
 fi
 
 if test $build_gw16012 = yes; then
-  AC_DEFINE(BUILD_GW16012, 1, [1 if you want the Gateworks GW16012 driver.])
+  AC_DEFINE([BUILD_GW16012], [1], [1 if you want the Gateworks GW16012 driver.])
 else
-  AC_DEFINE(BUILD_GW16012, 0, [0 if you don't want the Gateworks GW16012 driver.])
+  AC_DEFINE([BUILD_GW16012], [0], [0 if you don't want the Gateworks GW16012 driver.])
 fi
 
 if test $build_presto_libftdi = yes; then
   build_bitq=yes
-  AC_DEFINE(BUILD_PRESTO_LIBFTDI, 1, [1 if you want the ASIX PRESTO driver using libftdi.])
+  AC_DEFINE([BUILD_PRESTO_LIBFTDI], [1], [1 if you want the ASIX PRESTO driver using libftdi.])
 else
-  AC_DEFINE(BUILD_PRESTO_LIBFTDI, 0, [0 if you don't want the ASIX PRESTO driver using libftdi.])
+  AC_DEFINE([BUILD_PRESTO_LIBFTDI], [0], [0 if you don't want the ASIX PRESTO driver using libftdi.])
 fi
 
 if test $build_presto_ftd2xx = yes; then
   build_bitq=yes
-  AC_DEFINE(BUILD_PRESTO_FTD2XX, 1, [1 if you want the ASIX PRESTO driver using FTD2XX.])
+  AC_DEFINE([BUILD_PRESTO_FTD2XX], [1], [1 if you want the ASIX PRESTO driver using FTD2XX.])
 else
-  AC_DEFINE(BUILD_PRESTO_FTD2XX, 0, [0 if you don't want the ASIX PRESTO driver using FTD2XX.])
+  AC_DEFINE([BUILD_PRESTO_FTD2XX], [0], [0 if you don't want the ASIX PRESTO driver using FTD2XX.])
 fi
 
 if test $build_bitq = yes; then
-  AC_DEFINE(BUILD_BITQ, 1, [1 if you want a bitq interface.])
+  AC_DEFINE([BUILD_BITQ], [1], [1 if you want a bitq interface.])
 else
-  AC_DEFINE(BUILD_BITQ, 0, [0 if you don't want a bitq interface.])
+  AC_DEFINE([BUILD_BITQ], [0], [0 if you don't want a bitq interface.])
 fi
 
 if test $build_usbprog = yes; then
-  AC_DEFINE(BUILD_USBPROG, 1, [1 if you want the usbprog JTAG driver.])
+  AC_DEFINE([BUILD_USBPROG], [1], [1 if you want the usbprog JTAG driver.])
 else
-  AC_DEFINE(BUILD_USBPROG, 0, [0 if you don't want the usbprog JTAG driver.])
+  AC_DEFINE([BUILD_USBPROG], [0], [0 if you don't want the usbprog JTAG driver.])
 fi
 
 if test $build_oocd_trace = yes; then
-  AC_DEFINE(BUILD_OOCD_TRACE, 1, [1 if you want the OpenOCD+trace ETM capture driver.])
+  AC_DEFINE([BUILD_OOCD_TRACE], [1], [1 if you want the OpenOCD+trace ETM capture driver.])
 else
-  AC_DEFINE(BUILD_OOCD_TRACE, 0, [0 if you don't want the OpenOCD+trace ETM capture driver.])
+  AC_DEFINE([BUILD_OOCD_TRACE], [0], [0 if you don't want the OpenOCD+trace ETM capture driver.])
 fi
 
 if test $build_jlink = yes; then
-  AC_DEFINE(BUILD_JLINK, 1, [1 if you want the J-Link JTAG driver.])
+  AC_DEFINE([BUILD_JLINK], [1], [1 if you want the J-Link JTAG driver.])
 else
-  AC_DEFINE(BUILD_JLINK, 0, [0 if you don't want the J-Link JTAG driver.])
+  AC_DEFINE([BUILD_JLINK], [0], [0 if you don't want the J-Link JTAG driver.])
 fi
 
 if test $build_vsllink = yes; then
-  AC_DEFINE(BUILD_VSLLINK, 1, [1 if you want the Versaloon-Link JTAG driver.])
+  AC_DEFINE([BUILD_VSLLINK], [1], [1 if you want the Versaloon-Link JTAG driver.])
 else
-  AC_DEFINE(BUILD_VSLLINK, 0, [0 if you don't want the Versaloon-Link JTAG driver.])
+  AC_DEFINE([BUILD_VSLLINK], [0], [0 if you don't want the Versaloon-Link JTAG driver.])
 fi
 
 if test $build_rlink = yes; then
-  AC_DEFINE(BUILD_RLINK, 1, [1 if you want the RLink JTAG driver.])
+  AC_DEFINE([BUILD_RLINK], [1], [1 if you want the RLink JTAG driver.])
 else
-  AC_DEFINE(BUILD_RLINK, 0, [0 if you don't want the RLink JTAG driver.])
+  AC_DEFINE([BUILD_RLINK], [0], [0 if you don't want the RLink JTAG driver.])
 fi
 
 if test $build_ulink = yes; then
-  AC_DEFINE(BUILD_ULINK, 1, [1 if you want the ULINK JTAG driver.])
+  AC_DEFINE([BUILD_ULINK], [1], [1 if you want the ULINK JTAG driver.])
 else
-  AC_DEFINE(BUILD_ULINK, 0, [0 if you don't want the ULINK JTAG driver.])
+  AC_DEFINE([BUILD_ULINK], [0], [0 if you don't want the ULINK JTAG driver.])
 fi
 
 if test $build_armjtagew = yes; then
-  AC_DEFINE(BUILD_ARMJTAGEW, 1, [1 if you want the ARM-JTAG-EW JTAG driver.])
+  AC_DEFINE([BUILD_ARMJTAGEW], [1], [1 if you want the ARM-JTAG-EW JTAG driver.])
 else
-  AC_DEFINE(BUILD_ARMJTAGEW, 0, [0 if you don't want the ARM-JTAG-EW JTAG driver.])
+  AC_DEFINE([BUILD_ARMJTAGEW], [0], [0 if you don't want the ARM-JTAG-EW JTAG driver.])
 fi
 
 if test $build_buspirate = yes; then
-  AC_DEFINE(BUILD_BUSPIRATE, 1, [1 if you want the Buspirate JTAG driver.])
+  AC_DEFINE([BUILD_BUSPIRATE], [1], [1 if you want the Buspirate JTAG driver.])
+else
+  AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.])
+fi
+
+if test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes; then
+  AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.])
+else
+  AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you don't want the High Level JTAG driver.])
+fi
+
+if test $build_osbdm = yes; then
+  AC_DEFINE([BUILD_OSBDM], [1], [1 if you want the OSBDM driver.])
+else
+  AC_DEFINE([BUILD_OSBDM], [0], [0 if you don't want the OSBDM driver.])
+fi
+
+if test $build_opendous = yes; then
+  AC_DEFINE([BUILD_OPENDOUS], [1], [1 if you want the estick/opendous JTAG driver.])
 else
-  AC_DEFINE(BUILD_BUSPIRATE, 0, [0 if you don't want the Buspirate JTAG driver.])
+  AC_DEFINE([BUILD_OPENDOUS], [0], [0 if you don't want the estick/opendous JTAG driver.])
 fi
 
 if test "$use_internal_jimtcl" = yes; then
@@ -784,11 +822,17 @@ fi
 
 if test $build_remote_bitbang = yes; then
   build_bitbang=yes
-  AC_DEFINE(BUILD_REMOTE_BITBANG, 1, [1 if you want the Remote Bitbang JTAG driver.])
+  AC_DEFINE([BUILD_REMOTE_BITBANG], [1], [1 if you want the Remote Bitbang JTAG driver.])
 else
-  AC_DEFINE(BUILD_REMOTE_BITBNAG, 0, [0 if you don't want the Remote Bitbang JTAG driver.])
+  AC_DEFINE([BUILD_REMOTE_BITBANG], [0], [0 if you don't want the Remote Bitbang JTAG driver.])
 fi
 
+if test $build_sysfsgpio = yes; then
+  build_bitbang=yes
+  AC_DEFINE([BUILD_SYSFSGPIO], [1], [1 if you want the SysfsGPIO driver.])
+else
+  AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
+fi
 #-- Deal with MingW/Cygwin FTD2XX issues
 
 if test $is_win32 = yes; then
@@ -846,7 +890,7 @@ then
    AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
 fi
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
    AC_MSG_CHECKING([for libftd2xx.a (darwin)])
 
    if test ! -f /usr/local/include/ftd2xx.h ; then
@@ -867,7 +911,7 @@ then
    AC_MSG_ERROR([The option: --with-ftd2xx-win32-zipdir is for win32 only])
 fi
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
    # Must be linux
    if test $host_os != linux-gnu && test $host_os != linux ; then
       AC_MSG_ERROR([The (linux) ftd2xx library from FTDICHIP.com is linux only. Try --enable-ft2232-libftdi instead])
@@ -930,7 +974,7 @@ if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
 fi
 fi # linux
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
 
 # Before we go any further - make sure we can *BUILD* and *RUN*
 # a simple app with the "ftd2xx.lib" file - in what ever form we where given
@@ -975,7 +1019,7 @@ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
 
 DWORD x = FT_DEVICE_4232H;
     ]], [])], [
-      AC_DEFINE(BUILD_FT2232_HIGHSPEED, [1],
+      AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1],
         [Support FT2232H/FT4232HS with FTD2XX or libftdi.])
       build_ft2232_highspeed=yes
     ], [
@@ -987,6 +1031,29 @@ DWORD x = FT_DEVICE_4232H;
     AC_MSG_WARN([You need a newer FTD2XX driver (version 2.04.16 or later).])
   fi
 
+AC_MSG_CHECKING([for ftd2xx FT232H device support])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include "confdefs.h"
+#if IS_WIN32
+#include "windows.h"
+#endif
+#include <stdio.h>
+#include <ftd2xx.h>
+
+DWORD x = FT_DEVICE_232H;
+    ]], [])], [
+      AC_DEFINE([HAS_ENUM_FT232H], [1],
+        [Support FT232H with FTD2XX or libftdi.])
+      has_enum_ft232h=yes
+    ], [
+      has_enum_ft232h=no
+    ])
+  AC_MSG_RESULT([$has_enum_ft232h])
+
+  if test $has_enum_ft232h = no; then
+    AC_MSG_WARN([You need a newer FTD2XX driver (version 2.08.12 or later).])
+  fi
+
 LDFLAGS=$LDFLAGS_SAVE
 CFLAGS=$CFLAGS_SAVE
 fi
@@ -1033,7 +1100,7 @@ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
   ]], [[
 enum ftdi_chip_type x = TYPE_2232H;
     ]])], [
-      AC_DEFINE(BUILD_FT2232_HIGHSPEED, [1],
+      AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1],
         [Support FT2232H/FT4232HS with FTD2XX or libftdi.])
       build_ft2232_highspeed=yes
     ], [
@@ -1045,6 +1112,25 @@ enum ftdi_chip_type x = TYPE_2232H;
       AC_MSG_WARN([You need a newer libftdi version (0.16 or later).])
     fi
 
+AC_MSG_CHECKING([for libftdi FT232H device support])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <stdio.h>
+#include <ftdi.h>
+  ]], [[
+enum ftdi_chip_type x = TYPE_232H;
+    ]])], [
+      AC_DEFINE([HAS_ENUM_FT232H], [1],
+        [Support FT232H with FTD2XX or libftdi.])
+      has_enum_ft232h=yes
+    ], [
+      has_enum_ft232h=no
+    ])
+    AC_MSG_RESULT([$has_enum_ft232h])
+
+    if test $has_enum_ft232h = no; then
+      AC_MSG_WARN([You need a newer libftdi version (0.20 or later).])
+    fi
+
   # Restore the 'unexpanded ldflags'
   LDFLAGS=$LDFLAGS_SAVE
   CFLAGS=$CFLAGS_SAVE
@@ -1052,53 +1138,82 @@ fi
 
 # check for usb.h when a driver will require it
 build_usb=no
-if test $build_jlink = yes -o $build_vsllink = yes -o $build_usbprog = yes -o \
+if test $build_vsllink = yes -o $build_usbprog = yes -o \
   $build_rlink = yes -o $build_ulink = yes -o $build_armjtagew = yes
 then
-  AC_CHECK_HEADERS([usb.h],[],
-  [AC_MSG_ERROR([usb.h is required to build some OpenOCD driver(s)])])
   build_usb=yes
 fi
 
-AM_CONDITIONAL(RELEASE, test $build_release = yes)
-AM_CONDITIONAL(PARPORT, test $build_parport = yes)
-AM_CONDITIONAL(DUMMY, test $build_dummy = yes)
-AM_CONDITIONAL(GIVEIO, test x$parport_use_giveio = xyes)
-AM_CONDITIONAL(EP93XX, test $build_ep93xx = yes)
-AM_CONDITIONAL(ECOSBOARD, test $build_ecosboard = yes)
-AM_CONDITIONAL(ZY1000, test $build_zy1000 = yes)
-AM_CONDITIONAL(ZY1000_MASTER, test $build_zy1000_master = yes)
-AM_CONDITIONAL(IOUTIL, test $build_ioutil = yes)
-AM_CONDITIONAL(AT91RM9200, test $build_at91rm9200 = yes)
-AM_CONDITIONAL(BITBANG, test $build_bitbang = yes)
-AM_CONDITIONAL(FT2232_LIBFTDI, test $build_ft2232_libftdi = yes)
-AM_CONDITIONAL(FT2232_DRIVER, test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes)
-AM_CONDITIONAL(USB_BLASTER_LIBFTDI, test $build_usb_blaster_libftdi = yes)
-AM_CONDITIONAL(USB_BLASTER_DRIVER, test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes)
-AM_CONDITIONAL(AMTJTAGACCEL, test $build_amtjtagaccel = yes)
-AM_CONDITIONAL(GW16012, test $build_gw16012 = yes)
-AM_CONDITIONAL(PRESTO_LIBFTDI, test $build_presto_libftdi = yes)
-AM_CONDITIONAL(PRESTO_DRIVER, test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes)
-AM_CONDITIONAL(USBPROG, test $build_usbprog = yes)
-AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes)
-AM_CONDITIONAL(JLINK, test $build_jlink = yes)
-AM_CONDITIONAL(VSLLINK, test $build_vsllink = yes)
-AM_CONDITIONAL(RLINK, test $build_rlink = yes)
-AM_CONDITIONAL(ULINK, test $build_ulink = yes)
-AM_CONDITIONAL(ARMJTAGEW, test $build_armjtagew = yes)
-AM_CONDITIONAL(REMOTE_BITBANG, test $build_remote_bitbang = yes)
-AM_CONDITIONAL(BUSPIRATE, test $build_buspirate = yes)
-AM_CONDITIONAL(USB, test $build_usb = yes)
-AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes)
-AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes)
-AM_CONDITIONAL(IS_WIN32, test $is_win32 = yes)
-AM_CONDITIONAL(IS_DARWIN, test $is_darwin = yes)
-AM_CONDITIONAL(BITQ, test $build_bitq = yes)
-
-AM_CONDITIONAL(MINIDRIVER, test $build_minidriver = yes)
-AM_CONDITIONAL(MINIDRIVER_DUMMY, test $build_minidriver_dummy = yes)
-
-AM_CONDITIONAL(INTERNAL_JIMTCL, test $use_internal_jimtcl = yes)
+# Check for libusb1 ported drivers.
+build_usb_ng=no
+if test $build_jlink = yes -o $build_hladapter_stlink = yes -o $build_osbdm = yes -o \
+  $build_opendous = yes -o $build_ftdi = yes -o $build_hladapter_icdi = yes
+then
+  build_usb_ng=yes
+fi
+
+# check for libusb library if necessary
+use_libusb0=no
+use_libusb1=no
+if test $build_usb = yes -o $build_usb_ng = yes; then
+  if test $check_libusb0 = no -a $build_usb_ng = yes; then
+	AC_CHECK_HEADER([libusb-1.0/libusb.h],
+			[AC_DEFINE(HAVE_LIBUSB1, 1, [Define if you have libusb-1.0]) check_libusb0=no use_libusb1=yes ],
+			[ check_libusb0=yes use_libusb1=no ])
+  fi
+
+  if test $check_libusb0 = yes -o $build_usb = yes; then
+	AC_CHECK_HEADERS([usb.h], [use_libusb0=yes],
+			[AC_MSG_ERROR([libusb or libusb-1.0 are required to build some OpenOCD driver(s)])])
+  fi
+fi
+
+AM_CONDITIONAL([RELEASE], [test $build_release = yes])
+AM_CONDITIONAL([PARPORT], [test $build_parport = yes])
+AM_CONDITIONAL([DUMMY], [test $build_dummy = yes])
+AM_CONDITIONAL([GIVEIO], [test x$parport_use_giveio = xyes])
+AM_CONDITIONAL([EP93XX], [test $build_ep93xx = yes])
+AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes])
+AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
+AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
+AM_CONDITIONAL([AT91RM9200], [test $build_at91rm9200 = yes])
+AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes])
+AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes])
+AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes])
+AM_CONDITIONAL([FTDI_DRIVER], [test $build_ftdi = yes])
+AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
+AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes])
+AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
+AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
+AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
+AM_CONDITIONAL([PRESTO_DRIVER], [test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes])
+AM_CONDITIONAL([USBPROG], [test $build_usbprog = yes])
+AM_CONDITIONAL([OOCD_TRACE], [test $build_oocd_trace = yes])
+AM_CONDITIONAL([JLINK], [test $build_jlink = yes])
+AM_CONDITIONAL([VSLLINK], [test $build_vsllink = yes])
+AM_CONDITIONAL([RLINK], [test $build_rlink = yes])
+AM_CONDITIONAL([ULINK], [test $build_ulink = yes])
+AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes])
+AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes])
+AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes])
+AM_CONDITIONAL([HLADAPTER], [test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes])
+AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes])
+AM_CONDITIONAL([OPENDOUS], [test $build_opendous = yes])
+AM_CONDITIONAL([SYSFSGPIO], [test $build_sysfsgpio = yes])
+AM_CONDITIONAL([USB], [test $build_usb = yes])
+AM_CONDITIONAL([USB_NG], [test $build_usb_ng = yes])
+AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes])
+AM_CONDITIONAL([USE_LIBUSB1], [test $use_libusb1 = yes])
+AM_CONDITIONAL([IS_CYGWIN], [test $is_cygwin = yes])
+AM_CONDITIONAL([IS_MINGW], [test $is_mingw = ye]s)
+AM_CONDITIONAL([IS_WIN32], [test $is_win32 = ye]s)
+AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = ye]s)
+AM_CONDITIONAL([BITQ], [test $build_bitq = yes])
+
+AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = ye]s)
+AM_CONDITIONAL([MINIDRIVER_DUMMY], [test $build_minidriver_dummy = yes])
+
+AM_CONDITIONAL([INTERNAL_JIMTCL], [test $use_internal_jimtcl = yes])
 
 # Look for environ alternatives.  Possibility #1: is environ in unistd.h or stdlib.h?
 AC_MSG_CHECKING([for environ in unistd.h and stdlib.h])
@@ -1161,8 +1276,8 @@ else
 fi
 
 AC_MSG_RESULT([$CC_FOR_BUILD])
-AC_SUBST(CC_FOR_BUILD)
-AC_SUBST(CFLAGS_FOR_BUILD)
+AC_SUBST([CC_FOR_BUILD])
+AC_SUBST([CFLAGS_FOR_BUILD])
 
 AC_MSG_CHECKING([for suffix of executable build tools])
 if test $cross_compiling = yes; then
@@ -1189,23 +1304,25 @@ else
   EXEEXT_FOR_BUILD=$EXEEXT
 fi
 AC_MSG_RESULT([$EXEEXT_FOR_BUILD])
-AC_SUBST(EXEEXT_FOR_BUILD)
-
-AC_OUTPUT(dnl
-    Makefile dnl
-    src/Makefile dnl
-    src/helper/Makefile dnl
-    src/jtag/Makefile dnl
-    src/jtag/drivers/Makefile dnl
-    src/transport/Makefile dnl
-    src/xsvf/Makefile dnl
-    src/svf/Makefile dnl
-    src/target/Makefile dnl
-    src/rtos/Makefile dnl
-    src/server/Makefile dnl
-    src/flash/Makefile dnl
-    src/flash/nor/Makefile dnl
-    src/flash/nand/Makefile dnl
-    src/pld/Makefile dnl
-    doc/Makefile dnl
-  )
+AC_SUBST([EXEEXT_FOR_BUILD])
+
+AC_CONFIG_FILES([
+  Makefile
+  src/Makefile
+  src/helper/Makefile
+  src/jtag/Makefile
+  src/jtag/drivers/Makefile
+  src/jtag/hla/Makefile
+  src/transport/Makefile
+  src/xsvf/Makefile
+  src/svf/Makefile
+  src/target/Makefile
+  src/rtos/Makefile
+  src/server/Makefile
+  src/flash/Makefile
+  src/flash/nor/Makefile
+  src/flash/nand/Makefile
+  src/pld/Makefile
+  doc/Makefile
+])
+AC_OUTPUT