X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=NEWS;h=2cf5d9f3e8dca2d520c1ffacfe6a9b2ecbc120bd;hp=a16079a1138501ca03bdbfbb8f5a3f21a26d5252;hb=1c51f342d7f6da760ddd4e46eae91b6d6c06f579;hpb=4eb2e50e4d7c8757bd6ade97cb784880778452a6

diff --git a/NEWS b/NEWS
index a16079a113..2cf5d9f3e8 100644
--- a/NEWS
+++ b/NEWS
@@ -1,14 +1,73 @@
-This file should include items worth mentioning in the
-OpenOCD openocd-0.2.0 source archive release.
-
-The following areas of OpenOCD functionality changed in this release:
+This file should include highlights of the changes made in the
+OpenOCD openocd-0.3.0 source archive release.  See the repository
+history for details about what changed, including bugfixes and
+other issues not mentioned here.
 
 JTAG Layer:
+    FT2232H (high speed USB) support doesn't need separate configuration
+    New FT2232H JTAG adapters:  Amontec, Olimex, Signalyzer
+    New reset_config options for SRST gating the JTAG clock (or not)
+    TAP declaration no longer requires ircapture and mask attributes
+    Scan chain setup should be more robust, with better diagnostics
+    New TAP events:
+	"post-reset" for TAP-invariant setup code (TAPs not usable yet)
+	"setup" for use once TAPs are addressable (e.g. with ICEpick)
+    Overridable Tcl "init_reset" and "jtag_init" procedures
+    Simple "autoprobe" mechanism to help simplify server setup
+
+Boundary Scan:
+    SVF bugfixes ... parsing fixes, better STATE switch conformance
+    XSVF bugfixes ... be more correct, handle Xilinx tool output
+
 Target Layer:
+    Warn on use of obsolete numeric target IDs
+    New commands for use with Cortex-M3 processors:
+	"cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
+	"cortex_m3 vector_catch" ... traps certain hardware faults
+		without tying up breakpoint resources
+    If you're willing to help debug it
+	VERY EARLY Cortex-A8 and ARMv7A support
+	Updated BeagleBoard.org hardware support
+	you may need to explicitly "reset" after connect-to-Beagle
+    New commands for use with XScale processors: "xscale vector_table"
+    ARM
+	bugfixes to single-stepping Thumb code
+	ETM: unavailable registers are not listed
+	ETB, ETM: report actual hardware status
+    ARM9
+	name change:  "arm9 vector_catch" not "arm9tdmi vector_catch"
+    ARM11
+	single stepping support for i.MX31
+	bugfix for missing "arm11" prefix on "arm11 memwrite ..."
+    GDB support
+	gdb_attach command is gone
+
 Flash Layer:
+    The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
+    New drivers:
+	lpc2900, for NXP LPC2900 chips (ARM968 based)
+	mx3_nand, for imx31
+    New "last" flag for NOR "flash erase_sector" and "flash protect"
+    The "nand erase N" command now erases all of bank N
+    Speed up davinci_nand by about 3x
+
 Board, Target, and Interface Configuration Scripts:
+    Amontec JTAGkey2 support
+    Cleanup and additions for the TI/Luminary Stellaris scripts
+    LPC1768 target (and flash) support
+	Keil MCB1700 eval board
+    Samsung s3c2450
+	Mini2440 board
+    Numeric TAP and Target identifiers now trigger warnings
+    PXA255 partially enumerates
+
 Documentation:
+    Capture more debugging and setup advice
+    Notes on target source code changes that may help debugging
+
 Build and Release:
+    Clean builds on (32-bit) Cygwin
+    Clean builds on 64-bit MinGW
 
 For more details about what has changed since the last release,
 see the ChangeLog associated with this source archive.  For older NEWS,