flash/nor: flash driver for Synwit SWM050 MCUs

[openocd.git] / tcl / target / swm050.cfg

diff --git a/tcl/target/swm050.cfg b/tcl/target/swm050.cfg
new file mode 100644 (file)
index 0000000..a819f9c
--- /dev/null
+++ b/tcl/target/swm050.cfg
@@ -0,0 +1,45 @@
+# Synwit SWM050
+
+if { [info exists CHIPNAME] } {
+       set _CHIPNAME $CHIPNAME
+} else {
+       set _CHIPNAME swm050
+}
+set _CHIPSERIES swm050
+
+if { [info exists WORKAREASIZE] } {
+       set _WORKAREASIZE $WORKAREASIZE
+} else {
+       set _WORKAREASIZE 0x400
+}
+
+if { [info exists CPUTAPID] } {
+       set _CPUTAPID $CPUTAPID
+} else {
+       set _CPUTAPID 0x410CC200
+}
+
+swd newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME swm050 0x0 0x2000 0 0 $_TARGETNAME
+
+
+$_TARGETNAME configure -event reset-init {
+       # Stop the watchdog, just to be safe
+       mww 0x40019000 0x00
+       # Set clock divider value to 1
+       mww 0x400F0000 0x01
+       # Set system clock to 18Mhz
+       mww 0x400F0008 0x00
+}
+
+# SWM050 (Cortex-M0 core) supports SYSRESETREQ
+if {![using_hla]} {
+    # if srst is not fitted use SYSRESETREQ to
+    # perform a soft reset
+    cortex_m reset_config sysresetreq
+}