Remove annoying end-of-line whitespace from tcl/* files

[openocd.git] / tcl / target / at91eb40a.cfg

diff --git a/tcl/target/at91eb40a.cfg b/tcl/target/at91eb40a.cfg
index 44f9f8e0f068e6cf806d0abe3b791ca50f8734fc..064a3b56853d151f2b89d8450bda93fdc2a74c8d 100644 (file)
--- a/tcl/target/at91eb40a.cfg
+++ b/tcl/target/at91eb40a.cfg
@@ -1,14 +1,14 @@
 #Script for AT91EB40a
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME at91eb40a
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -28,7 +28,7 @@ if { [info exists CPUTAPID ] } {
 #SRST reset, which means that the CPU will run a number
 #of cycles before it can be halted(as much as milliseconds).
 reset_config srst_only srst_pulls_trst
- 
+
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
@@ -53,9 +53,9 @@ $_TARGETNAME configure -event reset-init {
        # Reset script for AT91EB40a
        reg cpsr 0x000000D3
        mww 0xFFE00020 0x1
-       mww 0xFFE00024 0x00000000  
-       mww 0xFFE00000 0x01002539 
-       mww 0xFFFFF124 0xFFFFFFFF  
+       mww 0xFFE00024 0x00000000
+       mww 0xFFE00000 0x01002539
+       mww 0xFFFFF124 0xFFFFFFFF
        mww 0xffff0010 0x100
        mww 0xffff0034 0x100
 }