tcl/target, board: remove useless gdb-attach event definitions

[openocd.git] / tcl / target / altera_fpgasoc.cfg

diff --git a/tcl/target/altera_fpgasoc.cfg b/tcl/target/altera_fpgasoc.cfg
index fccf8c51ea4cfd2e1be34672103931d8b8a97526..9a83b5ccb0d2c0b19e11c14248345b1698863679 100644 (file)
--- a/tcl/target/altera_fpgasoc.cfg
+++ b/tcl/target/altera_fpgasoc.cfg
@@ -14,7 +14,7 @@ if { [info exists DAP_TAPID] } {
         set _DAP_TAPID 0x4ba00477
 }
 
-jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x01 -irmask 0x0f \
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x01 -irmask 0x0f \
         -expected-id $_DAP_TAPID
 
 # Subsidiary TAP: fpga
@@ -27,7 +27,7 @@ jtag newtap $_CHIPNAME.fpga tap -irlen 10 -ircapture 0x01 -irmask 0x3 -expected-
 
 
 #
-# Cortex A9 target
+# Cortex-A9 target
 #
 
 # GDB target: Cortex-A9, using DAP, configuring only one core
@@ -42,23 +42,22 @@ set _TARGETNAME1 $_CHIPNAME.cpu.0
 set _TARGETNAME2 $_CHIPNAME.cpu.1
 
 # A9 core 0
-target create $_TARGETNAME1 cortex_a -chain-position $_CHIPNAME.dap \
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+target create $_TARGETNAME1 cortex_a -dap $_CHIPNAME.dap \
         -coreid 0 -dbgbase 0x80110000
 
 $_TARGETNAME1 configure -event reset-start { adapter_khz 1000 }
 $_TARGETNAME1 configure -event reset-assert-post "cycv_dbginit $_TARGETNAME1"
-$_TARGETNAME1 configure -event gdb-attach { halt }
 
 
 # A9 core 1
-#target create $_TARGETNAME2 cortex_a -chain-position $_CHIPNAME.dap \
+#target create $_TARGETNAME2 cortex_a -dap $_CHIPNAME.dap \
 #        -coreid 1 -dbgbase 0x80112000
 
 #$_TARGETNAME2 configure -event reset-start { adapter_khz 1000 }
 #$_TARGETNAME2 configure -event reset-assert-post "cycv_dbginit $_TARGETNAME2"
-#$_TARGETNAME2 configure -event gdb-attach { halt }
 
 proc cycv_dbginit {target} {
-        # General Cortex A8/A9 debug initialisation
+        # General Cortex-A8/A9 debug initialisation
         cortex_a dbginit
 }