Rick Altherr <kc8apf@kc8apf.net> - update syntax

[openocd.git] / src / target / target / nslu2.cfg

diff --git a/src/target/target/nslu2.cfg b/src/target/target/nslu2.cfg
index ba6a7973af7d343e8e6ab439c53f0241bee05221..c545e01f3b23b631c299972581d6887160ac70b8 100644 (file)
--- a/src/target/target/nslu2.cfg
+++ b/src/target/target/nslu2.cfg
@@ -1,22 +1,22 @@
-# use combined on interfaces or targets that can't set TRST/SRST separately\r
-reset_config srst_only\r
-\r
-# jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 7 0x1 0x7f 0x7e\r
-\r
-# target configuration\r
-target xscale big reset_init 0 ixp42x\r
-run_and_halt_time 0 30\r
-\r
-# maps to PXA internal RAM.  If you are using a PXA255\r
-# you must initialize SDRAM or leave this option off\r
-working_area 0 0x00020000 0x10000 nobackup\r
-\r
-# flash bank <driver> <base> <size> <chip_width> <bus_width>\r
-#flash bank cfi 0x50000000 0x1000000 2 4 0 \r
-\r
-\r
-\r
-\r
-\r
+# use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only
+
+# jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 7 0x1 0x7f 0x7e
+
+# target configuration
+target create target0 xscale -endian big -chain-position 0 -variant ixp42x
+
+
+# maps to PXA internal RAM.  If you are using a PXA255
+# you must initialize SDRAM or leave this option off
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0
+
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+#flash bank cfi 0x50000000 0x1000000 2 4 0 
+
+
+
+
+