jtag newtap change & huge manual update

[openocd.git] / src / target / target / at91sam9260.cfg

diff --git a/src/target/target/at91sam9260.cfg b/src/target/target/at91sam9260.cfg
index b3e1d215d4f2b4af1bb9b86bf9279eabcc1518aa..d7c8833cec9138ca62cafb3027a7b467e078565f 100644 (file)
--- a/src/target/target/at91sam9260.cfg
+++ b/src/target/target/at91sam9260.cfg
@@ -2,21 +2,16 @@
 # Target:    Atmel AT91SAM9260
 ######################################
 
-reset_config trst_and_srst
-
-#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
-jtag_device 4 0x1 0xf 0xe
-
-jtag_nsrst_delay 200
-jtag_ntrst_delay 0
+# We add to the minimal configuration.
+source [find target/at91sam9260minimal.cfg]
 
 ######################
 # Target configuration
 ######################
 
-target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs
-
-[new_target_name] configure -event reset-init {
+$_TARGET_NAME configure -event reset-init {
+       # at reset chip runs at 32khz
+       jtag_khz 8
        mww 0xfffffd08 0xa5000501         # RSTC_MR : enable user reset
        mww 0xfffffd44 0x00008000         # WDT_MR : disable watchdog
 
@@ -31,7 +26,8 @@ target create target0 arm926ejs -endian little -chain-position 0 -variant arm926
        mww 0xfffffc30 0x00000102         # PMC_MCKR : Clock from PLLA is selected
        sleep 10                          # wait 10 ms
 
-       jtag_speed 0                      # Increase JTAG Speed to 6 MHz
+       # Now run at anything fast... ie: 10mhz!
+       jtag_khz 10000                    # Increase JTAG Speed to 6 MHz
        arm7_9 dcc_downloads enable       # Enable faster DCC downloads
 
        mww 0xffffec00 0x01020102         # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
@@ -76,7 +72,6 @@ target create target0 arm926ejs -endian little -chain-position 0 -variant arm926
        mww 0xffffea04 0x5d2              # SDRAMC_TR : Set refresh timer count to 15us
 }
 
-[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
 
 #####################
 # Flash configuration